Page 91 / 101
Scroll up to view Page 86 - 90
Appendix A.
Supplemental Information
|
91
A
A.
Supplemental Information
This appendix provides the following information:
•
Factory Default Settings
•
Technical Specifications
•
Related Documents
Page 92 / 101
92
|
Appendix A.
Supplemental Information
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Factory Default Settings
Use the Restore Factory Settings button located on the bottom of your router to reset all
settings to their original factory default settings. This is called a hard reset. To perform a hard
reset, push and hold the Restore Factory Settings button for 6 seconds. Your router will return
to the factory configuration settings that are shown in the following table.
Feature
Default Behavior
Router
login
User login URL
or
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
Connection
WAN MAC address
Use default address
WAN MTU size
1500
Port speed
AutoSense
Local
network
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Disabled
Time zone
EST for North America
Daylight saving time adjustment
Disabled
Firewall
Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet)
Enabled (all)
Source MAC filtering
Disabled
Page 93 / 101
Appendix A.
Supplemental Information
|
93
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Mobile
Broadband
Internet Service Provider:
Bell Mobility
APN:
inet.bell.ca
Access Number:
*99#
PDP Type:
IP
Username:
none required
WiFi
Wireless communication
Enabled
SSID name
See label on the bottom of router
Security
WPA-PSK/WPA2-PSK mixed mode
Broadcast SSID
Enabled
Transmission speed
Auto (maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors,
including volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.)
Country/Region
Canada
RF channel
Auto
Operating mode
Up to 145 Mbps
Data rate
Best
Output power
Full
Access point
Enabled
Authentication type
Open system
Wireless Card Access List
All wireless stations allowed
Feature
(Continued)
Default Behavior
(Continued)
Page 94 / 101
94
|
Appendix A.
Supplemental Information
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Technical Specifications
Technical Specifications
Network Protocol and Standards
Compatibility
TCP/IP, DHCP
Power adapter
• North America: 120V AC, 60 Hz, input
• 12V DC @ 1.5A output
Physical specifications
• Dimensions: 6.8 in. x 5.03 in. x 1.28 in. (173 mm x 128 mm x 33 mm)
• Weight: 0.65 lbs. without the stand (0.29 kg)
Environmental Specifications
• Operating temperature: 0° to 40° C
(32º to 104º F)
• Operating humidity: 90% maximum relative humidity, noncondensing
Electromagnetic Emissions
FCC Part 15 Class B; IC; EN 55 022 (CISPR 22), Class B
Interface Specifications
• LAN: 10BASE-T or 100BASE-Tx, RJ-45
• WAN: 10BASE-T or 100BASE-TX, RJ-45
Antenna Connection (Optional)
• R-TNC connector
Page 95 / 101
Appendix A.
Supplemental Information
|
95
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Related Documents
The table below provides links to reference documents you can use to gain a more complete
understanding of the technologies used in your NETGEAR product.
Document
Link
Using Microsoft Vista and
Windows XP to Manage
Wireless Network Connections
ITCP/IP Networking Basics
Wireless Networking Basics
Preparing Your Network
Virtual Private Networking
Basics
Glossary
19216811.live