Page 116 / 140
Scroll up to view Page 111 - 115
GS108T Smart Switch Software Administration Manual
6-22
Monitoring, Maintenance, and Help
v1.0, December 2007
Enter the following field:
–
File Type
. Specifies either the firmware, configuration, or boot code file. Select one
from the drop-down list.
–
Download from file
. Specifies the location and name of the firmware or configuration
source file in the HTTP server. Click Browse to select the file.
3.
Click
Apply
to start the download.
Using the Help Tab
The navigation tabs on the top of the home page include a Help tab that lets you manage your
GS108T Gigabit Smart Switch using features under the following main menu commands and
subcommands:
•
“Online Help
”
•
“Support
”
•
“User Guide
”
The sections that follow in this chapter cover these features and tell you how to configure them in
the GS108T Smart Switch.
Figure 6-16
Page 117 / 140
GS108T Smart Switch Software Administration Manual
Monitoring, Maintenance, and Help
6-23
v1.0, December 2007
Online Help
The Online Help menu lets you connect to the NETGEAR web site and access the user guide.
Support
To connect to the NETGEAR web site:
1.
Select Maintenance > Online Help > Support. A screen similar to the following displays.
2.
To go to the NETGEAR web site, click
Apply
.
User Guide
To access the user guide (which is the guide you are now reading) online:
1.
Select Maintenance > Online Help > User Guide. A screen similar to the following displays.
Figure 6-17
Figure 6-18
Page 118 / 140
GS108T Smart Switch Software Administration Manual
6-24
Monitoring, Maintenance, and Help
v1.0, December 2007
2.
To access a PDF of the user guide, click
Apply
. The user guide is also referred to as the
Software Administration Manual
.
Page 119 / 140
Specifications and Default Values
A-1
v1.0, December 2007
Appendix A
Specifications and Default Values
GS108T Gigabit Smart Switch Specifications
The GS108T Gigabit Smart Switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP,
802.1D, 802.1p, and 802.1Q standards.
Table A-1. GS108T Gigabit Smart Switch Specifications
Feature
Value
Interfaces
8G (P01–P08)
PoE
N/A
Flash memory size
2 MB
SRAM size and type
16 MB DDR
Table A-2. Switch Performance
Feature
Value
Switching capacity
8 x 2 Gbps
Forwarding method
Store and Forward
Packet forwarding rate
10M:14,880 pps / 100M:148,809 pps / 1G:1,488,095
pps
MAC addresses
4K
Packet RAM buffer capacity
128 K-bytes
Page 120 / 140
GS108T Smart Switch Software Administration Manual
A-2
Specifications and Default Values
v1.0, December 2007
GS108T Gigabit Smart Switch Features and Defaults
Table A-3. Port Characteristics
Feature
Sets Supported
Default
Autonegotiation /
static speed / duplex
8 (per port)
Autonegotiation
Auto MDI/MDIX
N/A
Enabled
802.3x flow control /
back pressure
8 (per-port)
Enabled
Port mirroring
1
Disabled
Port trunking (aggregation)
2
Disabled
802.1D spanning tree
1
Disabled
802.1w RSTP
1
Disabled
IGMP snooping
1
Disabled
Static 802.1Q tagging
256
VID = 1
MemberPorts = [1–8]
Port based private VLAN
8 X 1
MemberPorts[1] = [1–8]
Learning process
N/A
N/A
Table A-4. Quality Of Service
Feature
Sets Supported
Default
Number of queues
N/A
N/A
Port based
8 (per port)
Normal for all ports
802.1p
1
Disabled
DSCP
1
Disabled
Table A-5. Security
Feature
Sets Supported
Default
IP access list
10
All IP addresses allowed
Password control access
1
Idle timeout = 5 mins.
Password = “password”
19216811.live