Page 111 / 140
Scroll up to view Page 106 - 110
GS108T Smart Switch Software Administration Manual
Monitoring, Maintenance, and Help
6-17
v1.0, December 2007
Reset
The Reset menu lets you reset the switch with its current configuration or its factory default
values.
Device Reboot
The Device Reboot screen lets you restart the switch with its current configuration.
To reset and restart the switch:
1.
Select Maintenance > Reset > Device Reboot. A screen similar to the following displays.
.
2.
Under Device Reboot, select the check box.
3.
Click
Apply
to restart the switch.
Figure 6-11
Note:
You can also use the Reset button on the front panel of the Smart Switch to reset the
switch to its current configuration.
Page 112 / 140
GS108T Smart Switch Software Administration Manual
6-18
Monitoring, Maintenance, and Help
v1.0, December 2007
Factory Default
The Factory Default screen lets you reset the switch to its factory default values:
1.
Select Maintenance > Reset > Factory Default. A screen similar to the following displays.
2.
Under Factory Default, select the check box.
3.
Click
Apply
to restart the switch.
Figure 6-12
Warning:
If there is no DHCP server on the network, the IP address becomes
192.168.0.239.
Warning:
The password returns to the factory default password.
Note:
You can also use the Factory Defaults button on the front panel of the Smart Switch
to reset the switch to its factory default values.
Page 113 / 140
GS108T Smart Switch Software Administration Manual
Monitoring, Maintenance, and Help
6-19
v1.0, December 2007
Upload
The Upload menu lets you upload the current firmware and configuration switch files to a TFTP
server or HTTP host so that you can back up the switch.
File Upload
You can upload files either to a TFTP server or to an HTTP host.
To upload files:
1.
Select Maintenance > Reset > File Upload. A screen similar to the following displays.
2.
Under File Upload, select the
TFTP
or
HTTP
radio button:
•
If you select the TFTP radio button to upload files to a TFTP server, complete the
following fields:
–
File Type
. Specifies either the firmware or the configuration file. Select one from the
drop-down list.
–
TFTP Server IP Address
. Specifies the IP address of the TFTP server.
–
Destination File Name
. Specifies the name of the firmware or configuration
destination file in the TFTP server.
Go to
step 3
.
Figure 6-13
Page 114 / 140
GS108T Smart Switch Software Administration Manual
6-20
Monitoring, Maintenance, and Help
v1.0, December 2007
•
If you select the HTTP radio button to upload files to an HTTP host, a screen similar to the
following displays.
From the
File Type
drop-down list, select either the firmware or the configuration file.
3.
Click
Apply
to start the upload.
Download
Download the firmware and configuration switch files from a TFTP server or HTTP host to the
switch so that you can restore or update the switch.
File Download
You can download files either from a TFTP server or from an HTTP host.
Figure 6-14
Note:
You can also update the firmware using the in the Smart Wizard Discovery utility
(see
“Firmware Upgrade” on page 1-8
).
Page 115 / 140
GS108T Smart Switch Software Administration Manual
Monitoring, Maintenance, and Help
6-21
v1.0, December 2007
To download files:
1.
Select Maintenance > Download > File Download. A screen similar to the following displays.
2.
Under File Download, select the
TFTP
or
HTTP
radio button:
•
If you select the TFTP radio button to download files from a TFTP server, complete the
following fields:
–
File Type
. Specifies either the firmware, configuration, or boot code file. Select one
from the drop-down list.
–
TFTP Server IP Address
. Specifies the IP address of the TFTP server.
–
Source File Name
. Specifies the name of the firmware or configuration source file in
the TFTP server.
Go to
step 3
.
•
If you select the HTTP radio button to download files from an HTTP host, a screen similar
to the following displays.
Figure 6-15
19216811.live