Page 166 / 240
Scroll up to view Page 161 - 165
ProSafe VPN Firewall 200 FVX538 Reference Manual
6-24
Router and Network Management
v1.0, March 2009
Viewing Port Triggering Status
You can view the status of Port Triggering by selecting
Security
from the main menu and
Port
Triggering
from the submenu. When the
Port Triggering
screen display, click the
Status
link.
Figure 6-10
Table 6-2.
Port Triggering Status Data
Item
Description
Rule
The name of the Rule.
LAN IP Address
The IP address of the PC currently using this rule.
Open Ports
The Incoming ports which are associated the this rule. Incoming traffic using one of
these ports will be sent to the IP address above.
Time Remaining
The time remaining before this rule is released, and thus available for other PCs.
This timer is restarted whenever incoming or outgoing traffic is received.
Page 167 / 240
ProSafe VPN Firewall 200 FVX538 Reference Manual
Router and Network Management
6-25
v1.0, March 2009
Viewing Router Configuration and System Status
The
Router Status
screen provides status and usage information. Select
Monitoring
from the
main menu and
Router Status
from the submenu. The
Router Status
screen will display.
Figure 6-11
Table 6-3.
Router Status Fields
Item
Description
System Name
This is the Account Name that you entered in the Basic Settings page.
Firmware Version
This is the current software the router is using. This will change if you upgrade your
router.
LAN Port
Displays the current settings for MAC address, IP address, DHCP role and IP Subnet
Mask that you set in the LAN IP Setup page. DHCP can be either Server or None.
Page 168 / 240
ProSafe VPN Firewall 200 FVX538 Reference Manual
6-26
Router and Network Management
v1.0, March 2009
Monitoring WAN Ports Status
You can monitor the status of both of the WAN connections, the Dynamic DNS Server
connections, and the DHCP Server connections. Select
Network Configuration
from the main
menu and
WAN Settings
from the submenu. The
WANI ISP Settings
screen will display. Click
the
WAN Status
link to obtain status on the WAN1 port. Select the
WAN2 IAP Settings
tab and
click the
WAN Status
link
to obtain status on the WAN2 port.
WAN1 Configuration
Indicates whether the WAN Mode is Single, Dual, or Rollover, and whether the WAN
State is UP or DOWN. It also displays if:
•
NAT is Enabled or Disabled.
•
Connection Type: DHCP enabled or disabled.
•
Connection State
•
WAN IP Address
•
Subnet Mask
•
Gateway Address
•
Primary and Secondary DNS Server Addresses
•
MAC Address.
WAN2 Configuration
Displays the same details as for WAN1 Configuration.
Note:
The
Router Status
screen displays current settings and statistics for your router. As
this information is read-only, any changes must be made on other pages.
Table 6-3.
Router Status Fields
Item
Description
Page 169 / 240
ProSafe VPN Firewall 200 FVX538 Reference Manual
Router and Network Management
6-27
v1.0, March 2009
.
Monitoring VPN Tunnel Connection Status
You can view the status of the VPN tunnels by selecting
VPN
from the main menu and
Connection Status
from the submenu. The
IPSec Connection Status
screen will display.
Figure 6-12
Figure 6-13
Table 6-4.
VPN Status data
Item
Description
Policy Name
The name of the VPN policy associated with this SA.
Endpoint
The IP address on the remote VPN Endpoint.
Page 170 / 240
ProSafe VPN Firewall 200 FVX538 Reference Manual
6-28
Router and Network Management
v1.0, March 2009
VPN Logs
The
VPN Logs
screen gives log details for recent VPN activity. Select
Monitoring
from the main
menu and
VPN Logs
from the submenu to view the VPN Logs. You can refresh the log display to
view the most recent entries, or clear the log display to delete all the log entries.
Tx (KB)
The amount of data transmitted over this SA.
Tx (Packets)
The number of IP packets transmitted over this SA.
State
The current status of the SA.Phase 1 is Authentication phase and Phase 2 is Key
Exchange phase.
Action
Use this button to terminate/build the SA (connection) if required.
Figure 6-14
Table 6-4.
VPN Status data
Item
Description
19216811.live