Page 146 / 238
Scroll up to view Page 141 - 145
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
8-12
Router and Network Management
202-10085-01, March 2005
Figure 8-3:
Traffic Limit Reached alert
Login Failures and Attacks
Figure 8-3
shows the
Log
screen that is invoked by clicking
Logs and Email
under
Security
on
the Main Menu bar.
WAN port shuts down once
the traffic limit is reached. An
email alert can be sent when
this shutdown happens.
Each WAN port is programmed
separately.
Page 147 / 238
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Router and Network Management
8-13
202-10085-01, March 2005
Figure 8-4:
Logs and email screen
Select the types of alerts to email.
Enable email alerts.
Accumulate 64 messages before
sending a log email.
Accumulate 8 messages before
sending an alert email.
Wait 24 hours before sending
sending an email.
Page 148 / 238
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
8-14
Router and Network Management
202-10085-01, March 2005
Monitoring
You can view status information about the firewall, WAN ports, LAN ports, and VPN tunnels and
program SNMP connections.
Viewing VPN Firewall Status and Time Information
Firewall Status
The Router Status menu provides status and usage information. From the main menu of the
browser interface, click on Management, then select Router Status to view this screen.
Page 149 / 238
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Router and Network Management
8-15
202-10085-01, March 2005
Figure 8-5:
Router Status screen
FVS124G
Page 150 / 238
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
8-16
Router and Network Management
202-10085-01, March 2005
Note:
The Router Status page displays current settings and statistics for your router. As this
information is read-only, any changes must be made on other pages.
Time Information
Time information is found on the Schedules screen.
Table 8-1.
Router Status
Item
Description
System Name
This is the Account Name that you entered in the Basic Settings page.
Firmware Version
This is the current software the router is using. This will change if you upgrade your
router.
LAN Port Information
These are the current settings for MAC address, IP address, DHCP role and Subnet
Mask that you set in the LAN IP Setup page. DHCP can be either Server or None.
WAN Port
Information
This indicates whether NAT is Enabled or Disabled. It also displays the current
settings for MAC address, IP address, DHCP role and Subnet Mask that you set in
the Basic Settings page. DHCP can be either Client or None.
19216811.live