1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FSM7328S
    5. /
  5. 32
Page 156 / 400 Scroll up to view Page 151 - 155
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-88
Switching Commands
202-10088-01, March 2005
domain-name
This command
specifies the domain name for a DHCP client. The <domain> specifies the domain
name string of the client.
Default
none
Format
domain-name <domain>
Mode
DHCP Pool Config
no domain-name
This command removes the domain name.
Format
no domain-name
Mode
DHCP Pool Config
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default
disable
Format
ip dhcp bootp automatic
Mode
Global Config
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
no ip dhcp bootp automatic
Mode
Global Config
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default
enabled
Format
ip dhcp conflict logging
Mode
Global Config
Page 157 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-89
202-10088-01, March 2005
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode
Global Config
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that
are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (address1 is the most preferred server, address2 is the next
most preferred server, and so on).
Default
none
Format
netbios-name-server <address>
[<address2>...<address8>]
Mode
DHCP Pool Config
no netbios-name-server
This command removes the NetBIOS name server list.
Format
no netbios-name-server
Mode
DHCP Pool Config
netbios-node-type
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
• m-node—Mixed
• h-node—Hybrid (recommended)
Default
none
Page 158 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-90
Switching Commands
202-10088-01, March 2005
Format
netbios-node-type <type>
Mode
DHCP Pool Config
no netbios-node-type
This command removes the NetBIOS node Type.
Format
no netbios-node-type
Mode
DHCP Pool Config
next-server
This command configures the next server in the boot process of a DHCP client.
Address is the IP address of the next server in the boot process, which is typically a Trivial File
Transfer Protocol (TFTP) server.
Default
If the next-server command is not used to configure a boot server list, the DHCP
Server uses inbound interface helper addresses as boot servers.
Format
next-server <address>
Mode
DHCP Pool Config
no next-server
This command removes the boot server list.
Format
no next-server
Mode
DHCP Pool Config
option
The command configures DHCP Server options.
Code
specifies the DHCP option code. Ascii
string specifies an NVT ASCII character string. ASCII character strings that contain white space
must be delimited by quotation marks. Hex string specifies hexadecimal data. in hexadecimal
character strings is two hexadecimal digits—each byte can be separated by a period, colon, or
white space.
Example :a3:4f:22:0c / a3 4f 22 0c / a34f.220c.9fed The <address> specifies an IP address.
Default
none
Page 159 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-91
202-10088-01, March 2005
Format
option <code> {ascii string | hex <string1>
[<string2>...<string8> ] | ip <address1>
[<address2>...<address8> ]}
Mode
DHCP Pool Config
no option
This command removes the options.
Format
no option <code>
Mode
DHCP Pool Config
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [address]
Modes
Privileged EXEC
User EXEC
IP address
The IP address of the client.
Hardware Address
The MAC Address or the client identifier.
Lease expiration
The lease expiration time of the IP Address assigned to the client.
Type
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Modes
Privileged EXEC
User EXEC
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping Packets
The maximum number of Ping Packets that will be sent to verify
that an ip address id not already assigned.
Page 160 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-92
Switching Commands
202-10088-01, March 2005
Excluded Address
The ranges of IP addresses that a DHCP server should not assign
to DHCP clients.
show ip dhcp pool configuration
This command displays pool configuration. If
all
is specified, configuration for all the pools is
displayed.
Format
show ip dhcp pool configuration {<name> | all}
Modes
Privileged EXEC
User EXEC
Pool Name
The name of the configured pool.
Pool Type
The pool type.
Lease Time
The lease expiration time of the IP Address assigned to the client.
DNS Servers
The list of DNS servers available to the DHCP client
Default Routers
The list of the default routers available to the DHCP client
Following additional field is displayed for Dynamic pool type:
Network
The network number and the mask for the DHCP address pool.
Following additional fields are displayed for Manual pool type:
Client Name
The name of a DHCP client.
Client Identifier
The unique identifier of a DHCP client.
Hardware Address
The hardware address of a DHCP client.
Hardware Address Type
The protocol of the hardware platform.
Host
The IP address and the mask for a manual binding to a DHCP client.
show ip dhcp server statistics
This command displays DHCP server statistics.
Format
show ip dhcp server statistics
Modes
Privileged EXEC
User EXEC
Address Pool
The number of configured address pools in the DHCP server.
Automatic bindings
The number of IP addresses that have been automatically mapped
to the MAC addresses of hosts that are found in the
DHCP database.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top