1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FSM7328
    5. /
  5. 15
Page 71 / 400 Scroll up to view Page 66 - 70
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-3
202-10088-01, March 2005
Machine Type
Specifies the machine model as defined by the Vital Product
Data.
Machine Model
Specifies the machine model as defined by the Vital Product
Data.
Serial Number
The unique box serial number for this switch.
FRU Number
The field replaceable unit number.
Part Number
Manufacturing part number.
Maintenance Level
Indicates hardware changes that are significant to software.
Manufacturer
Manufacturer descriptor field.
Burned in MAC Address
Universally assigned network address.
Software Version
The release.version.revision number of the code currently run-
ning on the switch.
Operating System
The operating system currently running on the switch.
Network Processing Element
The type of the processor microcode.
Additional Packages
This displays the additional packages that are incorporated into
this system, such as BGP-4 or Multicast.
show interface
This command displays a summary of statistics for a specific port or a count of all CPU traffic
based upon the argument.
Format
show interface {
<
slot/port
> | switchport}
Mode
Privileged EXEC
The display parameters, when the argument is ' <slot/port>', is as follows :
Packets Received Without Error
The total number of packets (including broadcast pack-
ets and multicast packets) received by the processor.
Packets Received With Error
The number of inbound packets that contained errors pre-
venting them from being deliverable to a higher-layer protocol.
Broadcast Packets Received
The total number of packets received that were directed to
the broadcast address. Note that this does not include multicast
packets.
Packets Transmitted Without Error
The total number of packets transmitted out of the
interface.
Page 72 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-4
Switching Commands
202-10088-01, March 2005
Transmit Packets Errors
The number of outbound packets that could not be transmitted
because of errors.
Collisions Frames
The best estimate of the total number of collisions on this Ether-
net segment.
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and sec-
onds since the statistics for this port were last cleared.
The display parameters, when the argument is 'switchport', is as follows :
Packets Received Without Error
The total number of packets (including broadcast pack-
ets and multicast packets) received by the processor.
Broadcast Packets Received
The total number of packets received that were directed to
the broadcast address. Note that this does not include multicast
packets.
Packets Received With Error
The number of inbound packets that contained errors pre-
venting them from being deliverable to a higher-layer protocol.
Packets Transmitted Without Error
The total number of packets transmitted out of the
interface.
Broadcast Packets Transmitted
The total number of packets that higher-level protocols
requested to be transmitted to the Broadcast address, including
those that were discarded or not sent.
Transmit Packet Errors
The number of outbound packets that could not be transmitted
because of errors.
Address Entries Currently In Use
The total number of Forwarding Database Address
Table entries now active on the switch, including learned and
static entries.
VLAN Entries Currently In Use
The number of VLAN entries presently occupying the
VLAN table.
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and sec-
onds since the statistics for this switch were last cleared.
show interface ethernet
This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
Page 73 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-5
202-10088-01, March 2005
Format
show interface ethernet
{<
slot/port
> |
switchport
}
Mode
Privileged EXEC
The display parameters, when the argument is '<slot/port>', are as follows :
Packets Received
Octets Received
- The total number of octets of data (including
those in bad packets) received on the network (excluding framing
bits but including Frame Check Sequence (FCS) octets). This
object can be used as a reasonable estimate of ethernet utilization.
If greater precision is desired, the etherStatsPkts and etherStat-
sOctets objects should be sampled before and after a common
interval. ----- The result of this equation is the value Utilization
which is the percent utilization of the ethernet segment on a scale
of 0 to 100 percent.
Packets Received < 64 Octets
- The total number of packets
(including bad packets) received that were < 64 octets in length
(excluding framing bits but including FCS octets).
Packets Received 64 Octets
- The total number of packets
(including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
Packets Received 65-127 Octets
- The total number of packets
(including bad packets) received that were between 65 and 127
octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received 128-255 Octets
- The total number of packets
(including bad packets) received that were between 128 and 255
octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received 256-511 Octets
- The total number of packets
(including bad packets) received that were between 256 and 511
octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received 512-1023 Octets
- The total number of pack-
ets (including bad packets) received that were between 512 and
1023 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received 1024-1518 Octets
- The total number of pack-
ets (including bad packets) received that were between 1024 and
Page 74 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-6
Switching Commands
202-10088-01, March 2005
1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received 1519-1522 Octets
- The total number of pack-
ets (including bad packets) received that were between 1519 and
1522 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received > 1522 Octets
- The total number of packets
received that were longer than 1522 octets (excluding framing
bits, but including FCS octets) and were otherwise well formed.
Packets Received Successfully
Total
- The total number of packets received that were without
errors.
Unicast Packets Received
- The number of subnetwork-unicast
packets delivered to a higher-layer protocol.
Multicast Packets Received
- The total number of good packets
received that were directed to a multicast address. Note that this
number does not include packets directed to the broadcast
address.
Broadcast Packets Received
- The total number of good packets
received that were directed to the broadcast address. Note that
this does not include multicast packets.
Packets Received with MAC Errors
Total
- The total number of inbound packets that contained errors
preventing them from being deliverable to a higher-layer proto-
col.
Jabbers Received
- The total number of packets received that
were longer than 1518 octets (excluding framing bits, but includ-
ing FCS octets), and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral number of octets (Alignment Error). Note that
this definition of jabber is different than the definition in IEEE-
802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4
(10BASE2). These documents define jabber as the condition
where any packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.
Fragments/Undersize Received
- The total number of packets
received that were less than 64 octets in length (excluding fram-
ing bits but including FCS octets).
Page 75 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-7
202-10088-01, March 2005
Alignment Errors
- The total number of packets received that
had a length (excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but had a bad Frame
Check Sequence (FCS) with a non-integral number of octets.
Rx FCS Errors
- The total number of packets received that had a
length (excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but had a bad Frame
Check Sequence (FCS) with an integral number of octets
Overruns
- The total number of frames discarded as this port was
overloaded with incoming packets, and could not keep up with
the inflow.
Received Packets not forwarded
Total
- A count of valid frames received which were discarded
(i.e. filtered) by the forwarding process.
Local Traffic Frames
- The total number of frames dropped in
the forwarding process because the destination address was
located off of this port.
802.3x Pause Frames Received
- A count of MAC Control
frames received on this interface with an opcode indicating the
PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
Unacceptable Frame Type
- The number of frames discarded
from this port due to being an unacceptable frame type.
VLAN Membership Mismatch
- The number of frames dis-
carded on this port due to ingress filtering.
VLAN Viable Discards
- The number of frames discarded on
this port when a lookup on a particular VLAN occurs while that
entry in the VLAN table is being modified, or if the VLAN has
not been configured.
Multicast Tree Viable Discards
- The number of frames dis-
carded when a lookup in the multicast tree for a VLAN occurs
while that tree is being modified.
Reserved Address Discards
- The number of frames discarded
that are destined to an IEEE 802.1 reserved address and are not
supported by the system.
Broadcast Storm Recovery
- The number of frames discarded
that are destined for FF:FF:FF:FF:FF:FF when Broadcast Storm
Recovery is enabled.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top