1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. DGND4000
    5. /
  5. 5
Page 21 / 24 Scroll up to view Page 16 - 20
19
Language
. Select the display language for this utility.
USB Printer
The first time that you use a printer, you need to click
Connect
. You
might be asked to install the driver for this printer. After the driver is
installed, the printer status changes to Available.
Note:
Some USB printers (for example: HP and Lexmark printer)
request that you do not connect the USB cable until you are prompted
by the installation software.
If the USB printer is detected and connected automatically, you need
to disconnect the printer, and then wait for the prompt asking you to
click
Connect
.
Once the printer shows Available status, the grayed-out Paused state
no longer displays in the Windows Printers and Faxes window.
This USB printer is ready. The utility does not always need to hold the
connection of this USB printer. Once there is any print job for this
printer, the USB utility connects to this USB printer automatically, then
Page 22 / 24
20
prints. After the print job is done, the printer status returns to the
Paused state.
Scan with a Multifunction Printer
You can use the scan feature of a multifunction printer.
1.
Make sure that the printer’s status shows as Available.
2.
Click the
Network Scanner
button.
This activates the scanner window that is used to perform the
scans.
Page 23 / 24
21
Time Machine
Time Machine works on Mac computers only, and automatically
backs up everything on your computer to a USB hard drive connected
to it. Here is how it works:
Note:
If you are already using Time Machine software with your USB
hard drive, you can skip
Steps 1
through
3
and go to
Step 4
.
1.
Physically connect the USB hard drive to your Mac.
2.
Format your USB hard drive.
3.
Open the disk utility and format your drive.
4.
You can now use Time Machine wirelessly by connecting the USB
hard drive to your DGND4000 router.
5.
From your MAC desktop, open
Macintosh HD
.
6.
Click the
Connect As
button. In the pop-up window, select
Registered User
, and enter
admin
as the user name and
password
as the password. Click
Connect
.
7.
After connecting successfully, you can list your connected devices.
Note that you see one extra device, called
admin
, whenever you
log in as
admin
.
8.
Click the
Use for Backup
button to complete your selection.
9.
Enter the password (
password
), and the backup begins.
Page 24 / 24
22
Other Features
For additional features, including Live Parental Controls, Traffic
Metering, ReadySHARE, Guest Access, and more, please log in to
your router at
http://routerlogin.net
.
© 2012 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of NETGEAR, Inc.
DO NOT stack equipment, or place equipment in tight spaces or in drawers.
Be sure that your equipment is surrounded by at least 2 inches (5 cm) of air
space.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © 2012 NETGEAR, Inc. All rights
reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top