Page 11 / 24 Scroll up to view Page 6 - 10
9
Repeat steps 1–3 to add other wireless devices.
Access the N750 Router to Make Changes
After you use NETGEAR genie to set up the router, you can log in to
the router to view its settings or make changes.
To log in to the router:
1.
Launch a web browser from a computer or wireless device that
is connected to the router.
2.
Type
www.routerlogin.net
or
www.routerlogin.com
in the
address field of the browser. A login screen displays:
3.
Enter
admin
for the user name and
password
for the password.
The NETGEAR genie screen displays:
Page 12 / 24
10
See the
User Manual
for more information about the router
screens.
To change the password for the router user name:
1.
Log in to the router.
2.
Select
Advanced > Administration > Set Password
to display the
Set Password screen:
3.
Type your old password, and type the new password twice.
Page 13 / 24
11
Troubleshooting
If the browser does not display the web page
:
Make sure that the computer is connected to one of the four LAN
Ethernet ports, or wirelessly to the router.
Make sure that the router is fully up and running. Its WiFi LED
should turn on.
Close and reopen the browser to make sure that the browser
does not cache the previous page.
Browse to
If the computer is set to a static or fixed IP address (this is
uncommon), change it to obtain an IP address automatically from
the router.
If the modem router does not power on
:
1.
Check your cables.
Disconnect and reconnect each cable. There is usually an
audible click when the cable is correctly connected.
See if the telephone cable connecting your DSL modem
router to the wall jack is plugged into a filter. A filter is not
required if you do not have telephone voice service. A filter
that is installed where it is not needed might eliminate your
ADSL signal.
2.
Power down your DSL modem router, and then power it up again.
a.
Shut down your computer and turn off the modem router.
b.
Unplug the power adapter and all other cables from the back
of the DSL modem router.
c.
Wait 30 seconds, then reconnect the cables and adapter to
your DSL modem router, and turn it on.
d.
Make sure that the router power light is on. If the light is off,
try plugging the adapter into another power outlet.
Page 14 / 24
12
e.
Turn your computer back on, and wait for the indicator lights
to turn green.
3.
Open a web browser and try to access the Internet.
If steps 1–3 do not resolve the problem:
4.
Reset your modem.
To reset your DSL modem router, use a pin or paper clip to press
in and hold the
Reset
button.
Page 15 / 24
13
NETGEAR genie App
The genie app is your home network dashboard. It lets you easily
view, manage, and control your entire home network, and helps you
fix common network problems. You can use the genie app or the
genie mobile app.
Internet
STATUS
GOOD
Network Map
Number of devices 16
Parental Controls
WiFi Connection
STATUS
Connected
Router Settings
Click here
ReadySHARE
Click here
Click here
genie app
Visit the NETGEAR genie web page at
www.netgear.com/genie
.
From the genie app, you can do the following:
Internet
. Monitor and repair Internet connectivity issues, for both
wired and wireless connections.
WiFi Connection
. View or change your router wireless settings.
Router Settings
. Log in to your router to view or change its
settings.
Network Map
. View network devices connected to your network.
Parental Controls
. Manage Parental Controls to protect devices
in your network from inappropriate contents.
ReadySHARE
. If you connected a USB storage device or printer
to the USB port on the router, then you can access its contents.
Support
. Support FAQs are available on your computer without
an Internet connection. You can get answers to common router
issues here. Some simple network tools are available to help you
debug the network as well.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top