Page 11 / 133 Scroll up to view Page 6 - 10
Hardware Setup
11
N300 Wireless ADSL2+ Modem Router DGN2200v4
Back Panel
The back panel has the buttons and port connections as shown in the following figure.
ADSL port
Ethernet LAN ports
USB port
On/Off button
Power adapter input
Reset button
LAN port or WAN cable/fiber Internet port
Figure 3. Back panel connections and buttons
For information about resetting the modem router to its factory settings, see
Factory Settings
on page
128.
Label
The label on the bottom of the modem router shows the preset login information, MAC
address, and serial number.
Wi-Fi network name
MAC address
Serial
and password
number
Figure 4. Label on modem router bottom
Page 12 / 133
Hardware Setup
12
N300 Wireless ADSL2+ Modem Router DGN2200v4
Position Your Modem Router
The modem router lets you access your network from virtually anywhere within the operating
range of your wireless network. However, the operating distance or range of your wireless
connection can vary significantly depending on the physical placement of your modem router.
For example, the thickness and number of walls the wireless signal passes through can limit
the range. For best results, place your modem router:
Near the center of the area where your computers and other devices operate and
preferably within line of sight to your wireless devices.
So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
In an elevated location such as a high shelf, keeping the number of walls and ceilings
between the modem router and your other devices to a minimum.
Away from electrical devices that are potential sources of interference, such as ceiling
fans, home security systems, microwaves, computers, or a 2.4 GHz cordless phone and
its base.
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
ADSL Microfilters
If this is the first time you have cabled a modem router between a DSL phone line and your
computer or laptop, you might not be familiar with ADSL microfilters. If you are, you can skip
this section and proceed to
Cable Your Modem Router
on page
14.
An ADSL microfilter is a small inline device that filters DSL interference out of standard phone
equipment that shares the same line with your DSL service. Every telephone device that
connects to a telephone line that provides DSL service needs an ADSL microfilter to filter out
the DSL interference. Examples of devices are telephones, fax machines, answering
machines, and caller ID displays. Not every phone line in your home necessarily carries DSL
service. That depends on the DSL service setup in your home.
Note:
Often the ADSL microfilter is in the box with the modem router. If you
purchased the modem router in a country where a microfilter is not
included, you have to acquire the ADSL microfilter separately.
One-Line ADSL Microfilter
Plug the ADSL microfilter into the wall outlet and plug your phone equipment into the jack
labeled Phone. The modem router plugs directly into a separate DSL line. Plugging the
modem router into the phone jack blocks the Internet connection. If you do not have a
Page 13 / 133
Hardware Setup
13
N300 Wireless ADSL2+ Modem Router DGN2200v4
separate DSL line for the modem router, the best thing to do is to use an ADSL microfilter
with a built-in splitter (see
Two-Line ADSL Microfilter
on page
13)
Plugs into DSL line
.
Figure 5. One-line ADSL microfilter
If you do not have a separate DSL line for the modem router, the second-best solution is to
get a separate splitter. To use a one-line filter with a separate splitter, insert the splitter into
the phone outlet, connect the one-line filter to the splitter, and connect the phone to the filter.
Two-Line ADSL Microfilter
Use an ADSL microfilter with a built-in splitter if you have a single wall outlet that provides
connectivity for both the modem router and your telephone equipment. Plug the ADSL
microfilter into the wall outlet, plug your phone equipment into the jack labeled Phone, and
plug the modem router into the jack labeled ADSL.
Plugs into the DSL line
Figure 6. Two-line ADSL microfilter with built-in splitter
Summary
One-line ADSL microfilter
. Use with a phone or fax machine.
Splitter
. Use with a one-line ADSL microfilter to share an outlet with a phone and the
modem router.
Two-line ADSL microfilter with built-in splitter
. Use to share an outlet with a phone
and the modem router.
Page 14 / 133
Hardware Setup
14
N300 Wireless ADSL2+ Modem Router DGN2200v4
Cable Your Modem Router
You can use either a DSL or a cable/fiber Internet connection.
ADSL
Phone
Line
DSL Internet
Cable/fiber
or
Figure 7. Cable connections
CAUTION:
Incorrectly connecting a filter to your modem router blocks your DSL
connection.
For help with installation, see the installation guide that came in the package with your
product.
For information about how to access the modem router to view or change the settings, see
Chapter 2, Access the Modem Router
.
Page 15 / 133
15
2
2.
Access the Modem Router
This chapter explains how to use NETGEAR genie to set up your modem router after you
complete cabling as described in the installation guide and in the previous chapter.
This chapter contains the following sections:
Modem Router Setup Preparation
Types of Logins and Access
NETGEAR genie Setup
Use NETGEAR genie after Installation
Upgrade the Firmware
Dashboard (Basic Home Screen)
Join Your Wireless Network
NETGEAR genie App and Mobile genie App

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top