Page 146 / 157
Scroll up to view Page 141 - 145
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
B-14
NETGEAR VPN Configuration
v1.0, March 2010
2.
Click
Apply
when you are finished to display the VPN Policies screen.
To view or modify the tunnel settings, select the radio button next to the tunnel entry, and then
click
Edit
.
Step 2: Configuring the NETGEAR ProSafe VPN Client on the
Remote PC at the Telecommuter’s Home Office
This procedure describes how to configure the ADSL2+ Modem Wireless Router. This procedure
assumes that the PC running the client has a dynamically assigned IP address.
The PC must have a VPN client program installed that supports IPSec (in this case study, the
NETGEAR VPN ProSafe Client is used). Go to the NETGEAR website (
)
for information about how to purchase the NETGEAR ProSafe VPN Client.
1.
Install the NETGEA ProSafe VPN Client on the remote PC, and then reboot.
a.
You might need to insert your Windows CD to complete the installation.
b.
If you do not have a modem or dial-up adapter installed in your PC, you might see the
warning message stating “The NETGEAR ProSafe VPN Component requires at least one
dial-up adapter be installed.” You can disregard this message.
Figure B-15
Note:
Before installing the ADSL2+ Modem Wireless Router software, be sure to turn off
any virus protection or firewall software you might be running on your PC.
Page 147 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
NETGEAR VPN Configuration
B-15
v1.0, March 2010
c.
Install the IPSec component. You might have the option to install either the VPN adapter
or the IPSec component or both. The VPN adapter is not necessary.
d.
The system should show the
ProSafe
icon (
) in the system tray after rebooting.
e.
Double-click the system tray icon to open the
Security Policy Editor
.
2.
Add a new connection.
a.
Run the NETGEAR ProSafe Security Policy Editor program, and create a VPN
Connection.
b.
From the Edit menu of the Security Policy Editor, click
Add
, and then click
Connection
.
A New Connection listing appears in the list of policies. Rename the new connection so
that it matches the connection name that you entered in the VPN settings of the DG834G
v5 on Gateway A.
Note:
In this example, the connection name used on the client side of the VPN
tunnel is
toDG834G
and it does not have to match the VPN_client
connection name used on the gateway side of the VPN tunnel (see
Figure B-17
) because connection names are irrelevant to how the VPN
tunnel functions.
Tip:
Choose connection names that make sense to the people using and
administrating the VPN.
Figure B-16
Page 148 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
B-16
NETGEAR VPN Configuration
v1.0, March 2010
c.
Select
Secure
in the
Connection Security
check-box group.
d.
Select
IP Subnet
in the
ID Type
drop-down list.
e.
In this example, type
192.168.0.1
in the
Subnet
field as the network address of the
DG834G v5.
f.
Enter
255.255.255.0
in the
Mask
field as the
LAN Subnet Mask
of the DG834G v5.
g.
Select
All
in the
Protocol
drop-down list to allow all traffic through the VPN tunnel.
h.
Select the
Connect
using
Secure Gateway Tunnel
check box.
i.
Select
Domain Name
in the
ID Type
drop-down list, and enter
fromDG834G.com
(in
this example).
j.
Select
Gateway Hostname
and enter
ntgr.dyndns.org
(in this example).
k.
The resulting connection settings are shown in
Figure B-17
.
3.
Configure the Security Policy in the ADSL2+ Modem Wireless Router software.
a.
In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking on the + symbol. My Identity and Security Policy appear below the
connection name.
Figure B-17
Page 149 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
NETGEAR VPN Configuration
B-17
v1.0, March 2010
b.
Click Security Policy to show the Security Policy menu.
c.
Select the
Main Mode
radio button in the
Select Phase 1 Negotiation Mode
group.
4.
Configure the VPN client identity.
In this step, you provide information about the remote VPN client PC. You must provide the
pre-shared key that you configured in the DG834G v5 and either a fixed IP address or a fixed
virtual IP address of the VPN client PC.
Figure B-18
Page 150 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
B-18
NETGEAR VPN Configuration
v1.0, March 2010
a.
In the Network Security Policy list on the left side of the Security Policy Editor window,
click
My Identity
.
b.
Select
None
in the
Select Certificate
drop-down list.
c.
Select
Domain Name
in the
ID Type
drop down list, and then enter
toDG834G.com
(in
this example). Select
Disabled
in the
Virtual Adapter
drop-down list.
d.
In the Internet Interface section, select
Intel PRO/100VE Network Connection
(in this
example, your Ethernet adapter might be different) in the
Name
field, and then enter
192.168.2.3
(in this example) in the
IP Addr
field.
e.
Click the
Pre-Shared Key
button.
f.
In the Pre-Shared Key screen, click
Enter Key
. Enter the DG834G v5’s pre-shared key
and click
OK
. In this example,
12345678
is entered. This field is case-sensitive.
Figure B-19
Figure B-20
19216811.live