Page 131 / 157
Scroll up to view Page 126 - 130
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Troubleshooting
7-9
v1.0, March 2010
•
Press both the Wireless button and WPS button on the side of the modem router for 5 seconds.
Use this method for cases when the administration password or IP address is not known.
Problems with Date and Time
The E-mail screen in the Content Filtering section displays the current date and time of day. The
ADSL2+ Modem Wireless Router uses the Network Time Protocol (NTP) to obtain the current
time from one of several network time servers on the Internet. Each entry in the log is stamped
with the date and time of day. Problems with the date and time function can include the following:
•
Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that your
Internet access settings are configured correctly. If you have just completed configuring the
router, wait at least 5 minutes, and check the date and time again.
•
Time is off by one hour.
Cause: The router does not automatically sense daylight savings time. On the E-mail screen,
select or clear the
Adjust for Daylight Savings Time
check box.
Note:
Pressing the reset button on the modem router reboots the unit but does not restore
the factory default settings.
Page 132 / 157
Technical Specifications
A-1
v1.0, March 2010
Appendix A
Technical Specifications
This appendix provides technical specifications for the 54 Mbps Wireless ADSL2+ Modem
Router DG834Gv5.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPPoA, or PPTP, RFC 1483
Bridged or Routed Ethernet, and RFC 1577 Classical IP over ATM
Power Adapter
North America:
120V AC, 60 Hz, input
United Kingdom, Australia:
240V AC, 50 Hz, input
Europe:
230V AC, 50 Hz, input
Japan:
100V AC, 50/60 Hz, input
All regions (output):
12 V DC @ 1.0A output
Physical Specifications
Dimensions:
6.9" x 4.7" x 1.1"
175 mm x 119 mm x 28 mm
Weight:
0.7 lbs.
0.3 kg
Environmental Specifications
Operating temperature:
0
to 40
C
(32º to 104º F)
Operating humidity:
90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of:
FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
Interface Specifications
LAN:
10BASE-T or 100BASE-Tx, RJ-45
WAN:
ADSL, ADSL2+, Dual RJ-11, pins 2 and 3,T1.413, G.DMT, G.Lite, ITU
Annex A (for the DG834G) or ITU Annex B (for the DG834GB)
Page 133 / 157
NETGEAR VPN Configuration
B-1
v1.0, March 2010
Appendix B
NETGEAR VPN Configuration
DG834G v5 to FVL328
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DG834G v5 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at
).
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify that the firmware is up to date, and that you have all the addresses that will be
necessary, and all of the parameters that need to be set on both sides. Check that there are no
firewall restrictions.
Table B-1. Profile Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
Security scheme:
IKE with Preshared Secret/Key (not certificate-based)
IP Addressing:
NETGEAR-Gateway A
Static IP address
NETGEAR-Gateway B
Static IP address
Page 134 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
B-2
NETGEAR VPN Configuration
v1.0, March 2010
Step-By-Step Configuration
1.
Configure the DG834G v5 as in the gateway-to-gateway procedures using the VPN Wizard
(see
“Setting Up a Gateway-to-Gateway VPN Configuration” on page 6-18
), being certain to
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:
a.
Enter
toFVL328
for the connection name.
b.
Enter
22.23.24.25
for the remote WAN’s IP address.
c.
Enter the following:
•
IP Address:
172.23.9.1
•
Subnet Mask:
255.255.255.0
Figure B-1
Note:
Product updates are available on the NETGEAR website at
Unit
WAN IP
LAN IP
LAN Subnet Mask
DG834G
14.15.16.17
10.5.6.1
255.255.255.0
FVL328
22.13.24.25
172.23.9.1
255.255.255.0
Page 135 / 157
Wireless ADSL2+ Modem Router DG834Gv5 User Manual
NETGEAR VPN Configuration
B-3
v1.0, March 2010
Figure B-2
toFVL328
10.5.6.1
172.23.9.1
toFVL328
22.23.24.25
10
5
6
172
23
9
Click VPN Policies under
the Advanced - VPN heading to display
this screen.
19216811.live