NETGEAR DG834G Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

NETGEAR

DG834G

Page 216 / 268 Scroll up to view Page 211 - 215

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

D-12

Wireless Networking Basics

WPA Authentication: Enterprise-level User

Authentication via 802.1x/EAP and RADIUS

Figure D-3:

WPA Overview

IEEE 802.1x offers an effective framework for authenticating and controlling user traffic to a

protected network, as well as providing a vehicle for dynamically varying data encryption keys via

EAP from a RADIUS server, for example. This framework enables using a central authentication

server, which employs mutual authentication so that a rogue wireless user does not join the

network.

It is important to note that 802.1x does not provide the actual authentication mechanisms. When

using 802.1x, the EAP type, such as Transport Layer Security (EAP-TLS), or EAP Tunneled

Transport Layer Security (EAP-TTLS), defines how the authentication takes place.

Note

: For environments with a Remote Authentication Dial-In User Service (RADIUS)

infrastructure, WPA supports Extensible Authentication Protocol (EAP). For environments

without a RADIUS infrastructure, WPA supports the use of a pre-shared key.

Together, these technologies provide a framework for strong user authentication.

Windows XP implements 802.1x natively, and several NETGEAR switch and wireless access

point products support 802.1x.

Certificate

Authority

(for

example

Win Server,

VeriSign)

WPA

enabled

wireless

client with

“supplicant”

TCP/IP

Ports Closed

Until

RADIUS Server

Wired Network with Optional

802.1x Port Based Network

Access Control

WPA enabled

Access Point

using

pre-shared key

802.1x

TCP/IP

Ports Opened

After

Authenticated

Wireless LAN

Authentication

Page 217 / 268

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

Wireless Networking Basics

D-13

Figure D-4:

802.1x Authentication Sequence

The AP sends Beacon Frames with WPA information element to the stations in the service set.

Information elements include the required authentication method (802.1x or Pre-shared key) and

the preferred cipher suite (WEP, TKIP, or AES). Probe Responses (AP to station) and Association

Requests (station to AP) also contain WPA information elements.

Initial 802.1x communications begin with an unauthenticated supplicant (client device)

attempting to connect with an authenticator (802.11 access point). The client sends an

EAP-start message. This begins a series of message exchanges to authenticate the client.

The access point replies with an EAP-request identity message.

Client with a WPA-

enabled wireless

adapter and supplicant

(Win XP, Funk,

Meetinghouse)

For example, a

WPA-enabled AP

For example, a

RADIUS server

Page 218 / 268

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

D-14

Wireless Networking Basics

The client sends an EAP-response packet containing the identity to the authentication server.

The access point responds by enabling a port for passing only EAP packets from the client to

an authentication server located on the wired side of the access point. The access point blocks

all other traffic, such as HTTP, DHCP, and POP3 packets, until the access point can verify the

client's identity using an authentication server (for example, RADIUS).

The authentication server uses a specific authentication algorithm to verify the client's identity.

This could be through the use of digital certificates or some other EAP authentication type.

The authentication server will either send an accept or reject message to the access point.

The access point sends an EAP-success packet (or reject packet) to the client.

If the authentication server accepts the client, then the access point will transition the client's

port to an authorized state and forward additional traffic.

The important part to know at this point is that the software supporting the specific EAP type

resides on the authentication server and within the operating system or application “supplicant”

software on the client devices. The access point acts as a “pass through” for 802.1x messages,

which means that you can specify any EAP type without needing to upgrade an 802.1x-compliant

access point. As a result, you can update the EAP authentication type to such devices as token

cards (Smart Cards), Kerberos, one-time passwords, certificates, and public key authentication, or

as newer types become available and your requirements for security change.

WPA Data Encryption Key Management

With 802.1x, the rekeying of unicast encryption keys is optional. Additionally, 802.11 and 802.1x

provide no mechanism to change the global encryption key used for multicast and broadcast

traffic. With WPA, rekeying of both unicast and global encryption keys is required.

For the unicast encryption key, the Temporal Key Integrity Protocol (TKIP) changes the key for

every frame, and the change is synchronized between the wireless client and the wireless access

point (AP). For the global encryption key, WPA includes a facility (the Information Element) for

the wireless AP to advertise the changed key to the connected wireless clients.

If configured to implement dynamic key exchange, the 802.1x authentication server can return

session keys to the access point along with the accept message. The access point uses the session

keys to build, sign and encrypt an EAP key message that is sent to the client immediately after

sending the success message. The client can then use contents of the key message to define

applicable encryption keys. In typical 802.1x implementations, the client can automatically change

encryption keys as often as necessary to minimize the possibility of eavesdroppers having enough

time to crack the key in current use.

Page 219 / 268

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

Wireless Networking Basics

D-15

Temporal Key Integrity Protocol (TKIP)

WPA uses TKIP to provide important data encryption enhancements including a per-packet key

mixing function, a message integrity check (MIC) named Michael, an extended initialization

vector (IV) with sequencing rules, and a re-keying mechanism. TKIP also provides for the

following:

•

The verification of the security configuration after the encryption keys are determined.

•

The synchronized changing of the unicast encryption key for each frame.

•

The determination of a unique starting unicast encryption key for each preshared key

authentication.

Michael

With 802.11 and WEP, data integrity is provided by a 32-bit

integrity check value

(ICV) that is

appended to the 802.11 payload and encrypted with WEP. Although the ICV is encrypted, you can

use cryptanalysis to change bits in the encrypted payload and update the encrypted ICV without

being detected by the receiver.

With WPA, a method known as

Michael

specifies a new algorithm that calculates an 8-byte

message integrity check (MIC) using the calculation facilities available on existing wireless

devices. The MIC is placed between the data portion of the IEEE 802.11 frame and the 4-byte ICV.

The MIC field is encrypted together with the frame data and the ICV.

Michael also provides replay protection. A new frame counter in the IEEE 802.11 frame is used to

prevent replay attacks.

Optional AES Support to be Phased In

One of the encryption methods supported by WPA, besides TKIP, is the advanced encryption

standard (AES), although AES support will not be required initially for Wi-Fi certification. This is

viewed as the optimal choice for security conscience organizations, but the problem with AES is

that it requires a fundamental redesign of the NIC’s hardware in both the station and the access

point. TKIP is a pragmatic compromise that allows organizations to deploy better security while

AES capable equipment is being designed, manufactured, and incrementally deployed.

Page 220 / 268

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

D-16

Wireless Networking Basics

Is WPA Perfect?

WPA is not without its vulnerabilities. Specifically, it is susceptible to denial of service (DoS)

attacks. If the access point receives two data packets that fail the message integrity code (MIC)

within 60 seconds of each other, then the network is under an active attack, and as a result, the

access point employs counter measures, which include disassociating each station using the access

point. This prevents an attacker from gleaning information about the encryption key and alerts

administrators, but it also causes users to lose network connectivity for 60 seconds. More than

anything else, this may just prove that no single security tactic is completely invulnerable. WPA is

a definite step forward in WLAN security over WEP and has to be thought of as a single part of an

end-to-end network security strategy.

Product Support for WPA

Starting in August, 2003, NETGEAR, Inc. wireless Wi-Fi certified products will support the WPA

standard. NETGEAR, Inc. wireless products that had their Wi-Fi certification approved before

August, 2003 will have one year to add WPA so as to maintain their Wi-Fi certification.

WPA requires software changes to the following:

•

Wireless access points

•

Wireless network adapters

•

Wireless client programs

Supporting a Mixture of WPA and WEP Wireless Clients is Discouraged

To support the gradual transition of WEP-based wireless networks to WPA, a wireless AP can

support both WEP and WPA clients at the same time. During the association, the wireless AP

determines which clients use WEP and which clients use WPA. The disadvantage to supporting a

mixture of WEP and WPA clients is that the global encryption key is not dynamic. This is because

WEP-based clients cannot support it. All other benefits to the WPA clients, such as integrity, are

maintained.

However, a mixed mode supporting WPA and non-WPA clients would offer network security that

is no better than that obtained with a non-WPA network, and thus this mode of operation is

discouraged.

Changes to Wireless Access Points

Wireless access points must have their firmware updated to support the following:

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share