The user name is
admin
. The default password is
password
. The user name and password are
case-sensitive.
4.
Click the
OK
button.
The BASIC Home page displays.
5.
Select
ADVANCED > ADVANCED Home
.
The ADVANCED Home page displays.
6.
In the Internet Port pane, click the
Connection Status
button.
The Connection Status pop-up window opens. The fields that display depend on the type of Internet
connection.
The following table describes the fields for a PPPoE connection.
Description
Field
The time elapsed since the connection was established.
Connection Time
The status can be Connected or Disconnected.
Connection Status
The negotiation can be a series of dashes, which indicates that the
connection is not established, or successful (Success).
Negotiation
The authentication can be a series of dashes, which indicates that the
connection is not established, or successful (Success).
Authentication
The IP address that is assigned by the ISP to the
modem router
.
IP Address
The subnet mask that is assigned by the ISP to the
modem router
.
Subnet Mask
7.
To establish the Internet connection when the connection is down, click the
Connect
button.
8.
To terminate the Internet connection when the connection is active, click the
Disconnect
button.
9.
Click the
Close Window
button.
The pop-up window closes.
View Devices Currently on the Network
You can view the active wired and WiFi devices in both the network to which the
modem router
is connected
and the
modem router
network. If you do not recognize a WiFi device, it might be an intruder.
Manage the Modem Router and Monitor the Traffic
251
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000