Page 46 / 66 Scroll up to view Page 41 - 45
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
4-8
Managing Your Network
v1.0, July 2009
2.
Fill in the fields:
Target
. The IP address or host name of the computer you would like to trace.
Max Hops
. Maximum number of hops to search for target.
Data Size
. The size of the packet.
Base Port
. The port number to send packet.
Resolve Host
. Turn On or OFf to resolve the host name to IP address .
3.
Click
Start Test
to begin the Traceroute.
4.
Click the
Refresh
button to see the results.
Viewing the Event Log
The gateway logs security-related events such as denied incoming service requests and hacker
probes. To see the event log:
1.
Log in to the gateway as described in
“Logging In to Your Gateway” on page 1-4
.
2.
In the main menu, under Maintenance, select Event Log. The Event Log screen displays:
Figure 4-8
To clear the log, click
Clear Log
; to refresh the log, click
Refresh
. You can enable e-mail
notification to receive these logs in an e-mail message. For information about e-mail
notifications, see
“Configuring Logs” on page 3-1
.
Page 47 / 66
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
Customizing Your Network
5-1
v1.0, July 2009
Chapter 5
Customizing Your Network
This chapter describes how to customize your network through the advanced settings on your
gateway. When you log in to the gateway, these tasks are grouped under Advanced.
This chapter includes:
“DMZ Host” on page 5-1
“LAN IP Setup” on page 5-2
“Configuring Universal Plug and Play (UPnP)” on page 5-5
Note:
For information about port forwarding, see
“Firewall Rules” on page 3-5
.
“NAT” on page 5-6
Log in to the gateway using its default address of
or at whatever IP address the
unit is currently configured. Use the default user name of
admin
and default password of
password
, or the password you have set up.
DMZ Host
You can use the DMZ Host screen to set up a default DMZ computer. Specifying a default
DMZ computer allows you to set up a PC that is available to anyone on the Internet for
services that you have not defined. There are security issues with doing this, so only set up
the DMZ host if you are willing to risk open access. If you do not define a DMZ host the
gateway discards any undefined service requests.
Page 48 / 66
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
5-2
Customizing Your Network
v1.0, July 2009
To set up a DMZ host:
1.
In the main menu, under Advanced, select DMZ Host. The following screen displays:
Figure 5-1
2.
If desired, select the
Respond to Ping on WAN Port
check box.
3.
Type the last digit(s) of the IP address in the
DMZ Address
field.
4.
Click
Apply
.
LAN IP Setup
The LAN IP screen allows you to configure LAN services such as the IP address of the gateway
and DHCP. The TCP/IP and DHCP default values work fine in most cases.
Page 49 / 66
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
Customizing Your Network
5-3
v1.0, July 2009
To configure LAN IP settings:
1.
In the main menu, under Advanced, select LAN IP. The LAN IP screen displays.
Figure 5-2
2.
Enter the following LAN IP settings:
LAN IP Address
. Enter the LAN IP address that you would like to assign for your
gateway in dotted decimal notation. The factory default settings is 192.168.0.1.
IP Subnet Mask
. Enter the network number portion of an IP address. Unless you are
implementing subnetting, use 255.255.255.0 as the subnet mask.
Page 50 / 66
Wireless Cable Voice Gateway CG3000/CG3100 User Manual
5-4
Customizing Your Network
v1.0, July 2009
DHCP Server
. The gateway is set up by default as a Dynamic Host Configuration
Protocol (DHCP) server, which provides the TCP/IP configuration for all the computers
that are connected to the gateway. You can change the default setting.
Yes
. Select this settings to enable the DHCP server on the gateway and assign IP
addresses to computers on your LAN automatically.
No
. Select this settings to assign IP addresses manually, or if you have another DHCP
server on your network.
Note:
If you disable the DHCP server, you will need to assign to your PC a
static IP address to reconnect to the gateway and enable the DHCP
server again.
Starting IP Address
. Complete the first of the contiguous addresses in the IP address
pool. 192.168.0.10 is the default start address.
Ending IP Address
. Complete the last of the contiguous addresses in the IP address pool.
192.168.0.19 is the default end address.
3.
Click
Apply
to save your LAN settings.
Reserving an IP Address for DHCP Use
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the private
LAN under DHCP Reservation Lease Info in the LAN Setup screen:
1.
Enter the MAC address of the PC for which you want to reserve an IP address.
2.
Enter the permanent IP address for the PC.
3.
Click
Add
to save your settings.
The MAC address and IP address are displayed in the DHCP Client Lease Info table. The current
system time is also displayed.
To delete an IP address from the DHCP Client Lease Info table:
1.
In the DHCP Client Lease Info table, click the radio button for the MAC and IP address that
you want to remove.
2.
Click
Delete
to remove the information for the selected MAC and IP address from the DHCP
Client Lease Info table.
To remove all information from the DHCP Client Lease Info table, click
Clear DHCP Leases
.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top