1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. C3700-100NAS
    5. /
  5. 16
Page 76 / 101 Scroll up to view Page 71 - 75
Manage Your Network
76
N600 WiFi Cable Modem Router Model C3700
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Administration > Event Log
.
The log screen shows the following information:
•
Time
. The time the event log entry was recorded.
•
Priority
. The severity for this event log entry.
•
Description
. A description of this event log entry.
5.
To refresh the log screen, click the
Refresh
button.
6.
To clear the log entries, click the
Clear Log
button.
Run the Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable and
measures the time it takes messages sent from the originating device to reach a destination
computer and return.
To run a ping test:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
Page 77 / 101
Manage Your Network
77
N600 WiFi Cable Modem Router Model C3700
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Administration > Diagnostics
.
In the
Utility
list,
Ping
is selected by default.
5.
Specify the following parameters for the ping utility:
•
Target
. The IP address of the ping target computer.
•
Ping Size
. The size (in bytes) of the ping packet.
•
No. of Pings
. The number of times to ping the target computer.
•
Ping Interval
. The time between pings.
6.
Click the
Start Test
button.
The ping results display.
7.
To stop a ping test, click the
Abort Test
button.
8.
To clear the results from the display, click the
Clear Results
button.
Run the Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute
utility.
To run a traceroute test:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
Page 78 / 101
Manage Your Network
78
N600 WiFi Cable Modem Router Model C3700
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Administration > Diagnostics
.
5.
In the
Utility
list, select
Traceroute
.
6.
Specify the following parameters for the traceroute utility:
•
Target
. The IP address or host name of the computer you are tracing.
•
Max Hops
. The maximum number of hops to allow when tracing the route.
•
Data Size
. The input the size (in bytes) of the packet.
•
Base Port
. The port number to send the packet to.
•
Resolve Host
. Select
On
to resolve the host name to the IP address.
7.
Click the
Start Test
button.
The traceroute results display.
8.
To clear the results from the display, click the
Clear Results
button.
View Wireless Access Points in Your Area
You can view wireless networks, or access points, in your area and to select and join a
wireless network.
To manage your wireless access point (AP):
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
Page 79 / 101
Manage Your Network
79
N600 WiFi Cable Modem Router Model C3700
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Administration > Wireless AP
.
On this screen, you can view wireless access points in use in your area.
View or Change the Modem Router Wireless Channel
To view or change your wireless channel:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Page 80 / 101
Manage Your Network
80
N600 WiFi Cable Modem Router Model C3700
4.
Select
ADVANCED > Administration > Wireless Channel
.
The screen displays wireless channels in use in the 2.4 GHz WiFi band. Your network is
shown in blue. Yellow shows other networks in your area. Many countries and geographic
locations have laws or guidelines about which channels can be used. Depending on your
location, some channels might not be available.
If many wireless networks at your location use the same channel as your wireless
network, you might experience interference. You can change the channel to avoid the
interference.
5.
To view wireless channels in use in the 5 GHz WiFi band, select the
5 GHz a/n
radio button.
6.
To change the wireless channel, click the
Change Channel
button.
The Wireless Setup screen displays.
7.
In the
Channel
list, select a different channel setting.
8.
Click the
Apply
button.
Your changes take effect.
Remote Management
The remote management feature lets you access your modem router over the Internet to
view or change its settings.
Note:
Be sure to change the modem router login password to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See
Change the admin
Password
on page
75.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top