1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. C3700-100NAS
    5. /
  5. 14
Page 66 / 101 Scroll up to view Page 61 - 65
Manage Your Network
66
N600 WiFi Cable Modem Router Model C3700
View Modem Router Status
To view modem router status and usage information:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED
.
The following screen displays.
Scroll to view more
View Cable Information
To view modem router cable information:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
Page 67 / 101
Manage Your Network
67
N600 WiFi Cable Modem Router Model C3700
The BASIC Home screen displays.
4.
Select
ADVANCED
.
The Cable Information pane displays the following:
•
Hardware Version
. The modem router model.
•
Firmware Version
. The version of the modem router firmware. It changes if you
upgrade the modem router firmware.
•
Cable Modem Serial Number
. The serial number of the cable modem.
•
CM Certificate
. The status of the cable modem certificate. If Not installed displays as
the status, contact your Internet service provider.
•
CM MAC
. The MAC address of the cable modem.
•
LAN Port
. The MAC address of LAN port 1. The following information also displays:
-
MAC Address
. The Media Access Control address. This address is the unique
physical address that the Ethernet (LAN) port of the modem router uses.
-
IP Address
. The IP address that the Ethernet (LAN) port of the modem router
uses. The default is 192.168.0.1.
-
DHCP Server
. Identifies whether the built-in DHCP server of the modem router is
active for the LAN-attached devices.
For information about using the Reboot button, see
Reboot the Modem Router
on page
69.
View Internet Port Information
To view modem router Internet port information:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED
.
The Cable Information pane displays the following:
The Internet Port pane displays these WAN Internet port settings:
•
MAC Address
. The MAC address of the WAN Internet port.
•
IP Address/Mask
. The IP address of the WAN Internet port.
•
Connection
. The type of WAN Internet port connection.
•
Default Gateway
. The IP address of the default gateway.
Page 68 / 101
Manage Your Network
68
N600 WiFi Cable Modem Router Model C3700
•
Domain Name Server
. The IP address of the Domain Name Server.
Wireless Settings
To view wireless settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED
.
The Wireless Settings (2.4 GHz) and Wireless Settings (5 GHz) panes display the
following information:
•
Name (SSID
). The wireless network name (SSID) that the modem router uses.
•
Region
. The geographic region where the modem router is being used. It is illegal to
use the wireless features of the modem router in some parts of the world.
•
Channel
. The operating channel of the wireless port being used. The default channel
is Auto. When Auto is selected, the modem router finds the best operating channel
available.
•
Mode
. The wireless communication mode: Up to 54 Mbps, Up to 145 Mbps (default),
and Up to 300 Mbps.
•
Wireless AP
. Indicates whether the modem router WiFi radios are on or off. If the
wireless radios are turned off, the WiFi On/Off LED on the front panel is off.
•
Broadcast Name
. Indicates whether the modem router is broadcasting its SSID.
•
Wireless Isolation
. Indicates if wireless isolation is enabled. When wireless isolation
is enabled, wireless clients can connect to the Internet, but cannot access each other
or access Ethernet devices on the network.
•
Wi-Fi Protected Setup
. Indicates whether Wi-Fi Protected Setup is configured for
this network.
Page 69 / 101
Manage Your Network
69
N600 WiFi Cable Modem Router Model C3700
Reboot the Modem Router
Rebooting the modem router disconnects all computers and mobile devices from the modem
router’s network.
To reboot the modem router:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED
.
5.
In the Cable Information pane, click the
Reboot
button.
A confirmation message displays.
6.
Click the
OK
button.
The modem router reboots.
Page 70 / 101
Manage Your Network
70
N600 WiFi Cable Modem Router Model C3700
Change the Router Mode
By default, the modem router is in router mode. This means that it works both as a modem
and as a router. You can share the Internet connection without using another router or
gateway. If you want to connect a gateway or router to the modem router, you must log in to
the modem router and change its Router Mode setting.
To change the router mode:
1.
On your computer or wireless device, find and select the modem router WiFi network.
The WiFi network name is on the modem router’s label.
2.
Join the WiFi network and enter the WiFi password.
The password is on the modem router’s label.
Your wireless device connects to the WiFi network.
3.
Launch a web browser.
4.
Type
http://routerlogin.net
or
.
A login screen displays.
5.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
6.
Select
ADVANCED >
Administration > Router Mode
.
7.
Select one of the radio buttons:
•
Yes
. This is the default setting. The modem router performs router functions such as
Network Address Translation (NAT).
•
No
. With this setting, the modem router works as a bridge and obtains IP addresses
from the Internet service provider.
8.
Click the
Apply
button.
Your change takes effect.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top