Page 6 / 81 Scroll up to view Page 1 - 5
6
NF1ADV User Guide
www.netcommlimited.com
YML27
WiFi Data and VoIP Gateway
NF1ADV
Product Introduction
Product Overview
ADSL2/2+ Integrated Access Device.
1 x 10/100/1000 Gigabit WAN port.
4 x 10/100 LAN Ethernet port.
2 x FXS Voice ports (circuit-switched).
1 x FXO port for PSTN calling.
802.11n up to 300Mbps Wireless
1
(Backward compatible with 802.11b/g).
DECT CAT-iQ 2.0 base station with DECT association button.
2 x USB host ports supporting mass storage file sharing and print serving.
WiFi Protected Setup (WPS) for wireless connectivity.
VPN pass-through (PPTP, L2TP, IPSec).
Browser based interface for configuration and management.
1.
Speeds are dependent on network coverage. See your MBB provider coverage maps for more details. The total number of WiFi users can also affect data speeds.
The maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n specifications. The actual wireless speed and
coverage are dependent on network and environmental conditions including but not limited to the volume of network traffic, building materials and
construction/layout.
Package Contents
The NF1ADV package consists of:
1 x NF1ADV WiFi Data and VoIP Gateway.
1 x 12VDC~2.0A Power Adapter.
1 x RJ-45 Ethernet LAN Cable.
1 x RJ-11 phone Cable.
Quick Setup Guide.
Wireless Security Card.
If any of these items are missing or damaged, please contact NetComm customer care.
Product Features
Congratulations on your purchase of a NetComm NF1ADV WiFi Data and VoIP Gateway. This router is compliant with 802.11n
offering speeds up to 6 times faster than standard 802.11g based routers while still being compatible with 802.11g & 802.11b
devices. The NF1ADV is not only a Wireless Access Point, and using a Gigabit speed WAN port and doubling as a 4-port full-duplex
Ethernet Switch, connects your wired-Ethernet devices together at incredible speeds.
With speeds of up to 300Mbps* the NetComm NF1ADV WiFi Data and VoIP Gateway uses advanced MIMO (Multi-Input, Multi-
Output) technology to transmit multiple steams of data in a single wireless channel giving you seamless access to multimedia
content. Robust RF signal travels farther, eliminates dead spots and extends network range. For data protection and privacy, the
NF1ADV encodes all wireless transmissions with WEP, WPA, and WPA2 encryption.
With inbuilt DHCP Server & powerful SPI firewall the NF1ADV protects your computers against intruders and most known Internet
attacks but provides safe VPN pass-through. With incredible speed and QoS function of 802.11n, NF1ADV is ideal for media-
centric applications like streaming video, gaming, and VoIP telephony allowing you to run multiple media-intense data streams
through the network at the same time, with no degradation in performance.
The NetComm NF1ADV creates a secure WiFi network, providing Internet access to users and simultaneous phone service using
your VoIP Service Provider’s
network. It incorporates a DECT base station for use with cordless phones. It also incorporates a
WLAN 802.11b/g/n access point, one 10/100Mbps Ethernet port, one 10/100Mbps Ethernet WAN port and two phone ports for
making and receiving telephone calls. It features the latest security options such as WPA and WPA2 data encryption, SPI (Stateful
Packet Inspection) Firewall and VPN pass through.
Page 7 / 81
www.netcommlimited.com
NF1ADV User Guide
7
YML38
Physical Dimensions and
Indicators
LED Indicators
The NF1ADV has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The display is
visible on the front of the NF1ADV to provide you with information about network activity and the device status. See below for an
explanation of each of the indicator lights.
Table 2 - LED Indicators
LED INDICATOR
ICON
DEFINITION
Power
The power LED will be a solid green light when the device is powered
on. The power LED will flash during the device start up process.
LAN
The LAN LEDs will be a solid green light when a specific LAN
connection is established. The LED flashes on LAN port traffic
throughput.
WAN
WAN mode: The WAN LED lights up when the router is connected to
the internet via an Ethernet WAN connection.
WiFi
The LED will show a solid green light when WLAN is enabled. The LED
flashes on traffic throughput (data transfer).
WPS
The WPS LED will light up to indicate that the wireless signal has been
configured using the WiFi Protected Setup option.
Phone1
A solid blue light appears when the analogue telephone connected to
Line 1 is off-hook. The Line 1 LED will flash on an incoming call.
Phone 2
A solid green light appears when the analogue telephone connected to
Line 2 is off-hook. The Line 2 LED will flash on an incoming call.
Line
The Line LED will be on when a line cable for PSTN calls is connected
from the router to a phone port of an ADSL filter.
DSL
The DSL LED will flicker on and off when training for a DSL signal.
When a DSL signal is detected the LED will be a solid green light.
WWW
The WWW LED will light up when there is a WAN connection through
a fixed DSL connection.
DECT
The DECT LED will light up when the NF1ADV is DECT registration
mode
Page Register
This Icon will light up when a DECT phone connected to the router is
off hook. It will also flash on an incoming call.
Page 8 / 81
8
NF1ADV User Guide
www.netcommlimited.com
YML27
WiFi Data and VoIP Gateway
NF1ADV
Integrated Interfaces
The following integrated interfaces are available on the rear of the NF1ADV:
Figure 1: Rear Panel
INTERFACE
FUNCTION
DSL
The ADSL port for xDSL connectivity.
WPS
Hold and release this button for less than 10 seconds to enable the WPS (WiFi Protected
System) push-button-connect function.
LAN 4
A LAN Port for wired Ethernet clients (Computers, Laptops, etc).
LAN 3
A LAN Port for wired Ethernet clients (Computers, Laptops, etc).
LAN 2
A LAN Port for wired Ethernet clients (Computers, Laptops, etc).
LAN 1
A LAN Port for wired Ethernet clients (Computers, Laptops, etc).
WAN
The WAN Ethernet port for a Fixed Line (ADSL/Cable/Satellite) connection to the internet.
Phone 1
The RJ-11 phone port provides a connection to a standard analogue telephone.
Phone 2
The RJ-11 phone port provides a connection to a standard analogue telephone
Line
The RJ-11 port provides a connection to your PSTN phone line for PSTN pass through
calling.
Reset/
Hold this button down for over 10 seconds to reset the router to factory default settings.
Power
The power connector designed for use with a DC 12V 2A Power Adapter.
On/Off
The switch that can be used to power up or down the NF1ADV.
Table 3: Rear Panel Interface Connectors
Page 9 / 81
www.netcommlimited.com
NF1ADV User Guide
9
YML38
NF1ADV Default Settings
The following tables list the default settings for the NF1ADV.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
Table 4 - LAN Management Default Settings
WAN (INTERNET)
WAN mode:
DHCP
Table 5 - WAN Port Default Settings
WIRELESS (WIFI)
SSID:
(Refer to the included wireless security card)
Security:
Mixed WPA2/WPA-PSK
Security Key:
(Refer to the included wireless security card)
Table 6
WiFi Default Settings
For security purposes, each NF1ADV comes with a unique SSID that varies by a 4 digit number at the end.
e.g. SSID: “
NetComm Wireless XXXX
NF1ADV WEB INTERFACE ACCESS
Username:
admin
Password:
admin
Table 7 - Web Interface Default Settings
Page 10 / 81
10
NF1ADV User Guide
www.netcommlimited.com
YML27
WiFi Data and VoIP Gateway
NF1ADV
Safety and Product Care
With reference to unpacking, installation, use and maintenance of your electronic device, the following basic guidelines are
recommended:
To avoid fire or shock hazard do not use or install this product near water. For example, near a bathtub, kitchen sink,
laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its
path and no heavy items should be placed on the cord. In addition, do not walk on, step on or mistreat the cord.
To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are
unobstructed.
WARNING
Disconnect the power line from the device before servicing.
Transport and Handling
When transporting the NF1ADV, it is recommended to return the product in the original packaging. This ensures the product will not
be damaged.
In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent
damage during courier transport.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top