72
NF1ADV User Guide
www.netcommlimited.com
YML27
WiFi Data and VoIP Gateway
NF1ADV
FAQ
1.
I cannot seem to access the web page interface.
The default IP address of the unit is
192.168.1.1, so first try to open a web browser to this address. Also check that your
laptop/ PC is using
the same subnet as the router’s Ethernet port.
i.e An IP address has been assigned to your computer
in the range of 192.168.1.x where x can equal 2
–
254.
2.
The router has a connection but cannot access the internet
Check that DNS Proxy is enabled by clicking on the LAN link on the configuration interface. Make sure that the DHCP DNS
server address 1 IP address is set to the same address as that of the Ethernet port.
3.
Can I make PSTN calls from the NF1ADV?
Yes. By connecting a regular landline (Analogue) telephone to the port labelled Phone 1 using the RJ-11
Cable provided. To activate the phone jacks in your home or office connect an RJ-11 Cable from the port
labelled
“Line” to any wall jack. When you lift the receiver you will hear a dial tone and can place your call
. Dial ## before
the number you wish to be connected to, and the PSTN call will be placed.
4.
Is the NF1ADV secure; can other people access my wireless network?
The NF1ADV comes configured with WPA2-PSK WiFi security enabled. When you first access the Internet,
type
192.168.1.1 into the address bar, the wizard will pop up to configure your computer to connect with
the wireless security settings of your choice (please see the Quick Start Guide for more information on connecting your
data devices to the NF1ADV). Only people you allow access to, will be able to connect to the NF1ADV ensuring your
connection is secure and safe.
5.
Can I change the name and password of my wireless network?
Yes. You can change your NF1ADV settings from the browser user interface by typing
192.168.1.1 into
the address bar of your Web browser. You can change the WiFi network name or SSID (Service Set Identifier), WiFi
security standard (WPA, WPA2, WEP) and your WiFi password.
6.
How do I share my Internet connection, using the NF1ADV, with other users?
Provide the SSID (Service Set Identifier) and WiFi network password of your NF1ADV for any users you want to share your
WiFi Internet connection with. Each user will need to select the
NF1ADV’s
SSID, on their WiFi enabled computer or device
and enter the network password you provide.
7.
What is the difference between upload and download speeds and why do they differ?
Upload is when you send information (e.g. emails) from your computer and download is when you receive information via
the Internet. The speeds at which upload and download operate depend on the way you use the Internet and the size of
files you send and receive.
8.
Do I need to attach an antenna on this device?
No. The NF1ADV comes equipped with an onboard WLAN antenna.
9.
I have lost the security card that came with the setup instructions. What can I do?
If you have lost your security card, and forgotten the wireless security details (SSID and WiFi network password), there is a
label attached to the base of your NF1ADV with all your original security details. If the label is unreadable or has been
removed, the WiFi network password can be viewed or reset by logging in to the Management Console using an Ethernet
Cable connected to the LAN port of the NF1ADV.
10.
I forgot my Management Console password. What can I do?
If you have forgotten your Management Console password and cannot access the Web user interface, you will need to
reset your NF1ADV back to factory default settings. To reset your device press and hold the reset button on the back of
your NF1ADV for 10-15 seconds until all the indicator lights on the unit flash to indicate the device is reset. After a reset,
use the default WiFi settings (SSID and WPA key) which can be found on the base of your NF1ADV. (Note - this will also
reset any custom settings and passwords you may have already set up).
11.
Can I use the NF1ADV overseas?
Yes. The NF1ADV is equipped for most overseas xDSL services and connections.
19216811.live