NB604N

–

ADSL2+ Wireless N300 Modem Router

46

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

www.netcommwireless.com

Wireless Bridge

Wireless Bridge allows you to configure the router’s access point as a bridge.

Select the mode for the Wireless Access Point built into the NB604N. W

hen selecting ‘Wireless Bridge’ mode, you can also specifiy

which wireless networks will be allowed to connect to the NB604N

by using the ‘Bridge Restrict’ option and then entering the

applicable MAC Addresses of the other wireless access points.

Click Apply/Save to save the new wireless bridge configuration settings.

Advanced

Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit

power and preamble settings.

Click Apply/Save to save any changes to the wireless network settings configuration.

Station Info

This page shows the MAC address of authenticated wireless stations that are connected to the NB340N and their status

www.netcommwireless.com

47

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

Diagnostics

The router has a diagnostic feature to test your DSL connection. You can use the diagnostic menu to perform the following test

functions from the router.



Testing the connection to your local network



Testing the connection to your DSL service provider.



Testing the connection to your Internet service provider.

Click ‘Next Connection’ to run diagnostics on the next configured WAN Service connection or click ‘Test with OAM F4’ to retes

t the

current WAN Service connection.

NB604N

–

ADSL2+ Wireless N300 Modem Router

48

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

www.netcommwireless.com

Management

Settings

You can choose to:



Backup the settings as a configuration file stored onto your PC



Update the current settings from a previously saved configuration file



Erase the current settings and restore the default factory values

Backup

To back up the settings as a configuration file saved on your PC, click Backup Settings.

Select the folder where you want to save the file and key in the file name under which you want to save the settings.

Update

To import a previously saved configuration file from your PC and update the settings of your router, click Browse to locate the binary

(.BIN or .IMG) upgrade file.

Then click Update Settings.

Restore Default

To restore your router to its factory default settings, click Restore Default Settings. When prompted, click OK.

Upon clicking OK, you will be prompted to follow the instruction as shown below.

www.netcommwireless.com

49

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

System Log

This feature provides you a comprehensive list of log entries reporting events which you have configured for viewing. The amount of

information displayed depends on the logging options selected.

To view the log, click View System Log.

You can click ‘Configure System Log’ to set the level of logging and whether or not a remote syslog server should be used.

If a remote system log server is to be used, enter the IP address and port the remote syslog server is running on.

Click Apply/Save to save the new system log configuration settings.

TR-069 Client

As a TR-069 capable router, the Internet service provider can remotely update the settings of the device.

These settings should not be changed unless directed to do so by your Internet Service Provider.

Click Apply/Save to save the new TR-069 configuration settings.

NB604N

–

ADSL2+ Wireless N300 Modem Router

50

NetComm NB604N

–

ADSL2+ Wireless N300 Modem

YML604X

www.netcommwireless.com

Internet Time

Enable Internet Time to automatically synchronize your time with an Internet based time server. You can use up to 5 NTP servers.

Enter your select NTP server to use for time synchronisation, select your time zone and then click Apply/Save to save the new

Internet Time settings.

Access Control

This feature enables you manage the user access rights for remote access management based on the Services being used, IP

addresses and Passwords.

Passwords

When you configure the router through an Internet browser, the system requires you to enter your user name and password to

validate your access permission. By default, the Username is set to

“admin” and the Password to “admin”.

You can change both

the user and password is required.

Click Apply/Save to save the new user account name or password configuration settings.

Services Control

Select which Services to allow, which ports the services are available on and whether to allow this access from the LAN or the WAN

side connection.

Click Apply/Save to save the new Services control configuration settings.