76 – YML902

--isolate <0|1>

Description: Set wireless devices isolation. When enabled, wireless devices connected to the router

will not be able to communicate to each other

Valid value: 0 or 1

0 – not isolate wireless devices.

1 – isolate wireless devices

Default value: 0

--channel <channelVal>

Description: Set the wireless LAN channel.

Valid value: 0~14

0 means auto select channel.

Default value: 0

--rate <rateVal>

Description: Set the wireless LAN data rate.

Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)

0 means auto

Default value: 0

--mrate <rateVal>

Description: Set the wireless LAN Multicast rate.

Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)

0 means auto

Default value: 0

--rts <rtsThreshold>

Description: Set the wireless LAN RTS threshold.

Valid value: 0~2347

Default value: 2347

Downloaded from

www.Manualslib.com

manuals search engine

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

YML902 – 77

--frag <fragThreshold>

Description: Set the wireless LAN fragment threshold.

Valid value: 256~2346

Default value: 2346

--dtim <dtimInterval>

Description: Set the wireless LAN DTIM interval.

Valid value: 1~255

Default value: 1

--beacon <beaconInterval>

Description: Set the wireless LAN beacon interval.

Valid value: 1~65535

Default value: 100

--xpress <on|off>

Description: Enable or disable the xpress feature

Valid value: on / off

Default value: off

--gmode <auto|performance|lrs|802.11b>

Description: Set the wireless LAN G mode

Default value: auto

--gprotect <off|auto>

Description: Enable or disable the gprotect feature

Default value: auto

--preamble <long|short>

Description: Set the wireless LAN preamble

Default value: long

Downloaded from

www.Manualslib.com

manuals search engine

78 – YML902

Example 1:

User wants to enable the wireless LAN, configure the wireless LAN network name (SSID) as “TestAP”,

configure wireless LAN channel to 5 and then hide the SSID:

wlan config --enable 1

wlan config --ssid “TestAP”

wlan config --channel 5 --hide 1

Or merge the above commands

wlan config --enable 1 --ssid “TestAP” --channel 5 --hide 1

Downloaded from

www.Manualslib.com

manuals search engine

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE

YML902 – 79

Configure wireless LAN security

Description: Enable or disable and configure the wireless LAN security. This router supports different

types of security such as: WEP, 802.1X, WPA and WPA2.

Synopsis:

wlan security open

[--wep <enabled|disabled>] [--keybit <64|128>]

[--nkey1 <keyStr>] [--nkey2 <keyStr>]

[--nkey3 <keyStr>] [--nkey4 <keyStr>]

[--keyidx <1|2|3|4>]

wlan security shared (wep have to enable)

[--wep <enabled|disabled>] [--keybit <64|128>]

[--nkey1 <keyStr>] [--nkey2 <keyStr>]

[--nkey3 <keyStr>] [--nkey4 <keyStr>]

[--keyidx <1|2|3|4>]

wlan security radius (wep have to enable)

[--rasip <serverIp>] [--raspt <portVal>] [--raskey <”raskeyStr”>]

[--wep <enabled|disabled>] [--keybit <64|128>]

[--nkey2 <keyStr>] [--nkey3 <keyStr>]

[--keyidx <2|3>]

wlan security wpa / wpa2 / wpa2mix

[--wlPreauth <0|1>] [--wlNetReauth <interval>]

[--wpaenc <tkip|aes|tkip+aes>] [--rekey <interval>]

[--rasip <serverIp>] [--raspt <portVal>] [--raskey <”raskeyStr”>]

[--wep <enabled|disabled>] [--keybit <64|128>]

[--nkey2 <keyStr>] [--nkey3 <keyStr>]

[--keyidx <2|3>]

wlan security psk / psk2 / psk2mix

[--wpaenc <tkip|aes|tkip+aes>] [--rekey <interval>]

[--pskey <”pskeyStr”>]

[--wep <enabled|disabled>] [--keybit <64|128>]

[--nkey2 <keyStr>] [--nkey3 <keyStr>]

[--keyidx <2|3>]

Downloaded from

www.Manualslib.com

manuals search engine

80 – YML902

Options:

--wep <enabled|disabled>

Description: enable or disable WEP encryption

--keybit <64|128>

Description: Set the WEP encryption strength

--nkey1 <keyStr>

--nkey2 <keyStr>

--nkey3 <keyStr>

--nkey4 <keyStr>

Description: Set the WEP key.

Note:

5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.

13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys

--keyidx <1|2|3|4>

Description: Set the current WEP Key index.

--rasip <serverIp>

Description: Set the RADIUS server IP address.

--raspt <portVal>

Description: Set the RADIUS server port.

Valid value: 1~65535

Default value: 1812

--raskey <raskeyStr>

Description: Set the RADIUS Key.

Valid value: string of 79 characters.

--wpaenc <tkip|aes|tkip+aes>

Description: Set the WPA encryption

Downloaded from

www.Manualslib.com

manuals search engine