Page 41 / 80
Scroll up to view Page 36 - 40
After you enter User ID and Password, the main webpage will show as below.
40
Page 42 / 80
4. Configure ENDSL-A2+4R2 Router via HTML
Interface
ENDSL-A2+4R2 Router supports a Web-based (HTML) GUI to allow users to configure
Router setting via Web browser.
4.1 Login
1)
Launch the Web browser.
2)
Enter the default IP address
3)
Entry of the username and password will be displayed. Enter the default
login
User Name
and
Password
:
z
The default login
User Name
of the administrator is
admin
, and the default
login password
is
admin
.
41
Page 43 / 80
The main webpage will be displayed as below:
4.2 Quick Start
Click
Quick Start
to guide you to configure the device to connect your ISP and have
Internet access within minutes. This Quick Start will guide you step by step to configure the
password, time zone, and WAN settings of you device. This Wizard is a helpful guide for first
time uses to the device.
42
NOTE:
It is a strong recommendation that using
Quick Start
to configure your ADSL settings.
Page 44 / 80
.
The
Quick Start
Setup Wizard includes four quick steps:
1) Set your new password
.
2)
Choose your time zone
.
3) Set your Internet connection
.
4) Re-start your ADSL router
.
Please follow the quick start step by step to configure the device.
43
Note:
If your ISP doesn’t provide DNS, after you complete Quick Start configuration, please go
to
Interface Setup
Æ
Internet
to configure your DNS settings.
Page 45 / 80
4.3
Interface Setup
Click an
Interface Setup
link to set ATM VC values, ISP Encapsulation, configure multi-
connection settings, and LAN configuration.
4.3.1 Internet
[ATM VC]
ATM settings are used to connect to your ISP. Your ISP provides VPI, VCI, settings to you. In
this Device, you can totally setup 8 PVCs on different encapsulations if you apply 8 different
virtual circuits from your ISP. You need to activate the VC to take effect. For PVCs
management, you can use ATM QOS to setup each PVC traffic line’s priority.
Virtual Circuit:
Select the VC number you want to setup.
VPI:
Virtual Path Identifier. The valid range for the VPI is 0 to 255.
VC
I: Virtual Channel Identifier. The valid range for the VCI is 1 to 65635 (0 to 31 is reserved for
local management of ATM traffic).
ATM QoS:
Select the Quality of Service types for this Virtual Circuit. The ATM QoS types
include CBR(Constant Bit Rate), VBR(Variable Bit Rate) and UBR (Unspecified Bit Rate).
These QoS types are all controlled by the parameters specified below, including PCR, SCR,
and MBS.
PCR:
Peak Cell Rate.
SCR:
Sustained Cell Rate.
44
MBS:
Maximum Burst Size.
19216811.live