Page 31 / 80
Scroll up to view Page 26 - 30
Step 3:
Select “
Manage Network connections
”.
Step 4:
Right-click
Local Area Connection
(local network your ADSL hooked up with)
and select
Properties
:
30
Page 32 / 80
Step 5:
Select
Internet Protocol (TCP/IP)
then click
Properties
:
Configure IP address Automatically
:
Step 6:
Select
Obtain an IP address automatically
and
Obtain DNS server address
automatically
. Click
OK
to finish the configuration.
31
Page 33 / 80
Configure IP Address Manually
:
Step 7:
Select
Use the following IP address
and
Use the following DNS server
addresses
.
IP address
: Fill in IP address 192.168.1.x (x is a number between 2 to 254).
Subnet mask
: Default value is 255.255.255.0.
Default gateway
Preferred DNS server
: Fill in preferred DNS server IP address.
Alternate DNS server
: Fill in alternate DNS server IP address.
You can use ping command under DOS prompt to check if you have setup TCP/IP
protocol correctly and if your computer has successfully connected to this router.
2) Type
under DOS prompt and the following messages will appear:
If the communication link between your computer and router is not setup correctly, after
you type
ping
192.168.1.1
under DOS prompt following messages will appear:
Request timed out.
Request timed out.
Request timed out.
32
This failure might be caused by cable issue or something wrong in configuration procedure.
Page 34 / 80
3.4 USB Device Driver Installation on MAC OS
Step 1.
Once you insert the Device Driver CD-ROM disk, direct the path of your MAC OS.
Double-click the compressed
“.zip”
file to unzip the file. Then, you will get a
“.pkg”
file.
Step 2.
Double-click the
“.pkg”
file, the Trendchip ADSL modem installer windows will appear.
Click
“Continue”
to go next process
33
Page 35 / 80
Step3.
Select a Destination to install the Trendchip ADSL Modem software and click
“Continue”
.
Step 4.
Click
“Continue”
to go next process.
34
19216811.live