1. Home
    2. /
  2. Manuals
    3. /
  3. Mitrastar
    4. /
  4. HGW-2501GN-R2
    5. /
  5. 14
Page 66 / 160 Scroll up to view Page 61 - 65
Chapter 8
LAN
66
Table 23
Network Setting > LAN > IPv6 LAN Setup
LABEL
DESCRIPTION
IPv6 Enable
Select this to enable the IPv6 feature on the Router.
Link Local Address
Enable
Select this to enable the Link Local Address feature on the Router.
Link Local Address
Type
Select
Manual
to manually enter a link local address. Select
EUI64
to use the EUI-64
format to generate a link local address from the Ethernet MAC address.
IPv6 Address
If you selected
Manual
in the
Link Local Address Type
field, enter the LAN IPv6
address you want to assign to your Router.
Prefix
Enter the address prefix to specify how many most significant bits in an IPv6 address
compose the network address.
Lan Global
Identifier Type
Select
Manual
to manually enter a LAN Identifier as the interface ID to identify the
LAN interface. The LAN Identifier is appended to the IPv6 address prefix to create the
routable global IPv6 address.
Select
EUI64
to use the EUI-64 format to generate an interface ID from the Ethernet
MAC address.
Lan Identifier
If you selected
Manual
, enter the LAN Identifier. The LAN identifier should be unique
and 64 bits in hexadecimal form.
IPv6 ULA Address
Type
A unique local address (ULA) is a unique IPv6 address for use in private networks but
not routable in the global IPv6 Internet.
Select
Auto Generate
to have the Router automatically generate a globally unique
address for the LAN IPv6 address. Select
Manual
to enter a static IPv6 ULA address.
IPv6 ULA Address
If you select
Manual
in the
IPv6 ULA Address Type
field, enter a static IPv6 ULA
address.
Global Address
Enable
Select this to enable IPv6 global address.
Delegate prefix
from WAN
Select this option to automatically obtain an IPv6 network prefix from the service
provider or an uplink router.
Static
Select this option to configure a fixed IPv6 address for the Router’s LAN IPv6 address.
Static IPv6
Address Prefix
If you select static IPv6 address, enter the IPv6 address prefix that the Device uses for
the LAN IPv6 address.
Prefix length
If you select static IPv6 address, enter the IPv6 prefix length that the Device uses to
generate the LAN IPv6 address.
Preferred
Lifetime
Enter the preferred lifetime for the prefix.
Valid Lifetime
Enter the valid lifetime for the prefix.
Page 67 / 160
Chapter 8
LAN
67
LAN IPv6
Address Assign
Setup
Select how you want to obtain an IPv6 address:
•
Stateless:
The Router uses IPv6 stateless autoconfiguration. RADVD (Router
Advertisement Daemon) is enabled to have the Router send IPv6 prefix
information in router advertisements periodically and in response to router
solicitations. DHCPv6 server is disabled.
•
Stateful:
The Router uses IPv6 stateful autoconfiguration. The DHCPv6 server is
enabled to have the Router act as a DHCPv6 server and pass IPv6 addresses to
DHCPv6 clients.
•
Stateless and Stateful:
The Router uses both IPv6 stateless and stateful
autoconfiguration. The LAN IPv6 clients can obtain IPv6 addresses either through
router advertisements or through DHCPv6.
LAN IPv6 DNS
Assign Setup
Select how the Router provides DNS server and domain name information to the
clients:
•
Stateless:
The Router uses IPv6 stateless autoconfiguration. RADVD (Router
Advertisement Daemon) is enabled to have the Router send IPv6 prefix
information in router advertisements periodically and in response to router
solicitations. DHCPv6 server is disabled.
•
Stateful:
The Router uses IPv6 stateful autoconfiguration. The DHCPv6 server is
enabled to have the Router act as a DHCPv6 server and pass IPv6 addresses to
DHCPv6 clients.
•
Stateless and Stateful:
The Router uses both IPv6 stateless and stateful
autoconfiguration. The LAN IPv6 clients can obtain IPv6 addresses either through
router advertisements or through DHCPv6.
DHCPv6 Server
Select
Enable
to have the Router act as a DHCPv6 server and pass IPv6 addresses,
DNS server and domain name information to DHCPv6 clients.
Pool Start/End
Specify the first/last IPv6 address in the pool of addresses that can be assigned to
DHCPv6 clients.
DNSv6 Mode
Select the DNS role (
Proxy
or
Relay
) that you want the Router to act in the IPv6 LAN
network. Alternatively, select
Manual
and specify the DNS servers’ IPv6 address in the
fields below. Select
None
to disable this feature.
Primary/
Secondary DNS
This field is available if you select
Manual
as the DNSv6 mode. Enter the first/second
DNS server IPv6 address the Router passes to the DHCP clients.
DNS Query Mode
Select how the Router handles clients’ DNS information requests.
•
IPv4 DNS Server First:
The Router forwards the requests to the IPv4 DNS server
first and then the IPv6 DNS server. Then it sends clients the first DNS information it
receives.
•
IPv6 DNS Server First:
The Router forwards the requests to the IPv6 DNS server
first and then the IPv4 DNS server. Then it sends clients the first DNS information it
receives.
•
IPv4 DNS Server Only:
The Router forwards the requests to the IPv4 DNS server
and sends clients the DNS information it receives.
•
IPv6 DNS Server Only:
The Router forwards the requests to the IPv6 DNS server
and sends clients the DNS information it receives.
Information
Refresh Time
Enter the number of seconds a DHCPv6 client should wait before refreshing
information retrieved from DHCPv6.
Advanced Setup
Click this to show the
RADVD Setup
section. Click the button again to close it.
Table 23
Network Setting > LAN > IPv6 LAN Setup (continued)
LABEL
DESCRIPTION
Page 68 / 160
Chapter 8
LAN
68
Network Connections: My Network Places: Properties: Example
Send RA on
Select this to have the Router send RA (Router Advertisement) messages to the LAN
hosts.
Note: The LAN hosts neither generate global IPv6 addresses nor communicate with
other networks if you disable this feature.
Advertisement
interval option on
Select this to have the RA messages the Router sends specify the allowed interval
between RA messages.
Hop Limit
Enter the maximum number of network segments that a packet can cross before
reaching the destination. When forwarding an IPv6 packet, IPv6 routers are required to
decrease the Hop Limit by 1 and to discard the IPv6 packet when the Hop Limit is 0.
Router Lifetime
Enter the time in seconds that hosts should consider the Router to be the default
router.
Router Preference
Select the router preference for the Router. The Router sends this preference in the
router advertisements to tell hosts what preference they should use for theRouter.
This helps hosts to choose their default router especially when there are multiple IPv6
router in the network.
Note: Make sure the hosts also support router preference to make this function work.
Reachable Time
(ms)
Enter the time in milliseconds that can elapse before a neighbor is detected.
Retrans Time (ms)
Enter the time in milliseconds between neighbor solicitation packet retransmissions.
Max RA Interval
Enter the maximum time between RA messages.
Min RA Interval
Enter the minimum time between RA messages.
Delegate MTU
from WAN
Select this to have the Router obtain the MTU setting from the service provider or
uplink router.
Manual
Select this to specify the MTU manually.
MTU
Enter the MTU value.
DAD Attempts
Specify the number of DAD (Duplicate Address Detection) attempts before an IPv6
address is assigned to the Router LAN interface.
Table 23
Network Setting > LAN > IPv6 LAN Setup (continued)
LABEL
DESCRIPTION
Page 69 / 160
9
Chapter
Chapter 9
Static Route
69
C
HAPTER
9
Chapter 9
Static Route
9.1
Configuring Static Route
Use the
Static Route
screen to view and configure IP static routes on the Router. Click
Network
Setting > Routing
to open the
Static Route
screen.
Figure 26
Network Setting > Routing > Static Route
Table 24
Network Setting > Routing > Static Route
LABEL
DESCRIPTION
Add New Static
Route
Click this to set up a new static route on the Router.
Destination IP
This is the IP network address of the final destination. Routing is always based on
network number.
Gateway
This is the IP address of the gateway.
Subnet Mask
This is the IP network subnet mask of the final destination.
Metric
This is the “cost” of transmission for routing purposes.
Modify
Click the
Edit
icon to go to the screen where you can set up a static route on the Router.
Click the
Delete
icon to remove a static route from the Router.
Page 70 / 160
Chapter 9
Static Route
70
9.1.1
Add/Edit Static Route
Click
Add New Static Route
in the
Static Route
screen or click the
Edit
icon next to a rule. Use this
screen to configure a static route.
Figure 27
Routing > Static Route: Add/Edit
Table 25
Routing > Static Route: Add/Edit
LABEL
DESCRIPTION
Destination IP
Address
Enter
the IP network address of the final destination.
IP Subnet Mask
Enter the IP subnet mask.
Gateway IP
Address
Enter the IP address of the next-hop gateway which helps forward packets to their
destinations.
Metric
Enter the “cost” of transmission for routing purposes. IP routing uses hop count as the
measurement of cost, with a minimum of 1 for directly-connected networks.
9.2
IPv6 Static Route
Use the
IPv6 Static Route
screen to view the IPv6 static route rules. Click
Network Setting
>
Routing
>
IPv6 Static Route
.
Figure 28
Network Setting > Routing > IPv6 Static Route

Rate

4.5 / 5 based on 2 votes.

Popular Mitrastar Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top