Page 46 / 67 Scroll up to view Page 41 - 45
MWN-WAPR300N
41
to enable your friends to access to these files on your computer. Suppose that your FTP
server or your computer’s static IP address is 192.168.8.10, and you want your friends to
access the server through the default FTP port: 21 and use TCP protocol.
Please follow the steps below to configure.
1.Enter 21 in both start port and end port fields, or you can also select FTP from the
well-known service port and port 21 will be added to the corresponding fields
automatically.
2. Enter 192.168.8.10 in the LAN IP column, and then select “Both” as the protocol and
select “Enable” as shown below:
Then scroll all the way to the bottom of the page and click the “Apply” button to save the
settings.
Now, when your friends want to visit the FTP server, they only need to enter
ftp://xxx.xxx.xxx.xxx:21 in their browser address field. Here, xxx.xxx.xxx.xxx means your
router’s WAN IP address. For example, when your router’s WAN IP address is
24.65.128.52; your friends need to enter
in the browser address
field.
Page 47 / 67
MWN-WAPR300N
42
NOTE:
If you set the service port of the virtual server as 80, you must set the Web management
port on Remote Web Management screen to be any value except 80 such as 8080.
Otherwise, there will be a conflict which will disable the virtual server.
7.2 DMZ Settings
The DMZ Settings screen allows one local computer or device to be exposed to the
Internet for use of a special-purpose service such as Gaming or VoIP. DMZ hosting
forwards all ports to one device.
DMZ Host IP Address:
The IP address of the LAN device you want to set as the
DMZ host.
Enable:
Check to enable the DMZ host.
For example:
Set your Game Console or VoIP device to the IP address 192.168.8.10 and then set
that IP Address as the DMZ host to bypass the firewall of the router and allow for a
smooth connection without interruption.
NOTE:
When the DMZ host is enabled, the firewall settings of the DMZ host will not function.
7.3 UPNP Settings
UPnP (Universal Plug and Play)
: The LAN device can request the router to process
some special port switching so as to enable the external host to access the resources of
the internal host.
Page 48 / 67
MWN-WAPR300N
43
Enable UPnP:
Click the checkbox to enable the UPnP.
Chapter 8 Security Settings
8.1 Client Filter Settings
You can enable Client Filter to control LAN computers’ access to some or all ports:
Filter Mode:
You can select either “Permit only” or “Forbid only”.
Access Policy:
Select a number from the drop-down list.
Policy Name (Optional):
A simple description of the policy. You can leave it blank
if you want.
Start/End IP:
Enter the start/end IP address.
Port:
Enter the controlled TCP/UDP protocol port. You can specify a port or port
range. For all ports enter 1 to 65535.
Type:
Select one protocol (TCP/UDP/Both) from the drop-down list.
Time:
Select the time range of client filter. The start time must be earlier than the
Page 49 / 67
MWN-WAPR300N
44
end time. The Time cannot cross over midnight.
Day(s):
Select the day(s) to run the access policy. The start day must be earlier
than the end day.
Enable:
To enable/disable the access policy.
Example1
Only
Permit
the
Kids’
computers
at
the
IP
addresses
192.168.8.100~192.168.8.120 to access the Internet from 9am to 9pm.
8.2 MAC Address Filter
You can limit certain computers’ access to Internet by using MAC Address Filter.
Page 50 / 67
MWN-WAPR300N
45
Filter mode:
You can select “Forbid only” or “Permit Only”.
Access Policy:
Select a number from the drop-down list.
Policy Name (Optional):
A simple description of the policy. You can leave it blank
if you want.
MAC Address:
Enter the MAC address you want the policy to apply to.
Time:
Select the time range. The start time must be earlier than the end time. The
Time cannot crossover midnight.
Day(s):
Select the day(s) to run the access policy. The start day must be earlier
than the end day.
Enable:
To enable/disable the access policy.
Example 1
Forbid an employee’s computer with the MAC address of 14:35:8B:17:02:10
to access Internet during 8:00am to 5:00pm from Monday to Friday.
8.3 URL Filter Settings
You can use URL filtering to forbid access to certain websites at a specified time.

Rate

3.5 / 5 based on 2 votes.

Popular MediaLink Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top