14

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

Setup Wizard

Wireless-B Internet Video Camera

11. The

Security Settings

screen will appear. If your network has WEP encryption enabled, then select the level of

WEP encryption and enter a Passphrase. If you do not have a Passphrase and you want to manually enter a

WEP key, leave the

Passphrase

field blank. If your network doesn’t have WEP encryption disabled, keep the

default,

Disabled

.

•

WEP

. In enable WEP encryption, select

64-Bit Keys

or

128-Bit Keys

from the drop-down menu. Then

enter a Passphrase. If you want to manually enter a WEP key, leave the

Passphrase

field blank.

•

Passphrase

. If you enabled WEP encryption, you can enter a Passphrase, so a WEP key will be

automatically generated after you click the Next button. If you want to manually enter a WEP key, leave

the

Passphrase

field blank. The Passphrase is case-sensitive and should have 16 alphanumeric

characters or fewer. It must match the passphrase of your wireless network and is compatible with

Linksys wireless products only. (You will have to enter the WEP key(s) manually on any non-Linksys

wireless products.)

Click the

Next

button.

12. If you entered a Passphrase, then you will see the automatically generated WEP key. If you did not enter a

Passphrase, then enter a WEP key in the

Key 1

field.

•

Key 1

. If you need to manually enter a WEP key, complete this field. If you are using 64-bit WEP

encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP

encryption, then the key must consist of 26 hexadecimal characters. Valid hexadecimal characters are

“0” through “9” and “A” through “F”.

Click the

Next

button.

Figure 5-10: Security Settings

Figure 5-11: Security Settings (WEP Key)

Downloaded from

www.Manualslib.com

manuals search engine

15

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

Setup Wizard

Wireless-B Internet Video Camera

13. On the screen shown in Figure 5-12, review your settings before the Setup Wizard starts to copy your files.

Click the

Save

button to continue.

14. After the files have been successfully copied, the

Congratulations

screen will appear.

•

Install Viewer & Recorder Utility

. Click this button to install the Camera’s Utility on your PC.

•

Setup SoloLink DDNS Service

. Click the

Setup SoloLink DDNS Service

button to set up and configure

the Linksys Dynamic Domain Name System (DDNS) service.

•

Exit

. Click the

Exit

button if you want to install the Camera’s Utility later.

Proceed to the next section, “Placement Options.”

Figure 5-12: Review New Settings

Figure 5-13: Congratulations

Downloaded from

www.Manualslib.com

manuals search engine

16

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

Placement Options

Wireless-B Internet Video Camera

Placement Options

There are three ways to place the Camera. The first way is to place the Camera horizontally on a surface, so it sits

on four small rubber feet. The second way is to stand the Camera vertically on a surface (see Figure 5-14). The

third way is to hang the Camera on a wall (see Figure 5-15). The second and third options are explained in further

detail below.

Stand Option

1.

The Camera includes a Camera Desktop Stand. Insert the end opposite to the antenna into the Stand.

2.

Place the Camera, and adjust its aim and focus accordingly.

Wall Mount Option

The Camera has two wall-mount slots on the opposite side of its viewer. The distance between these two slots is

80 mm (3.15 inches).

1.

Determine where you want to mount the Camera. Attach two screws to the wall, so that the Switch’s wall-

mount slots line up with the two screws.

2.

Maneuver the Camera so the screws are inserted into the two slots.

3.

Adjust the Camera’s aim and focus accordingly.

The installation of the Wireless-B Internet Video Camera is complete. Go to “Chapter 6: Installing the

Wireless-B Internet Video Camera Viewer & Recorder Utility.”

If advanced users wish to access the Camera through its Web-based Utility, then proceed to “Chapter 8:

Using the Wireless-B Internet Video Camera Web-based Utility.”

Figure 5-14: Stand Option

Figure 5-15: Wall Mount Option

Downloaded from

www.Manualslib.com

manuals search engine

17

Chapter 6: Installing and Using the Wireless-B Internet Video Camera Viewer & Recorder Utility

Overview

Wireless-B Internet Video Camera

Chapter 6: Installing and Using the Wireless-B Internet Video

Camera Viewer & Recorder Utility

Overview

This chapter will instruct you on how to install and use the Viewer & Recorder Utility on your PC. The Utility allows

you to easily view and record the Camera’s video.

Installing the Viewer & Recorder Utility

1.

On the

Welcome

or

Congratulations

screen of the Setup Wizard, click the

Install Viewer & Recorder Utility

button.

2.

The

Welcome

screen shown in Figure 6-2 will appear. Click the

Next

button to proceed.

Figure 6-1: Install Viewer & Recorder Utility

Figure 6-2: Install Viewer & Recorder Utility Welcome

Note:

To view video using a web browser, you must use Internet Explorer version 5.5 or higher. The

View Video feature will not work with Netscape. Netscape users should use the Viewer & Recorder

Utility instead.

Downloaded from

www.Manualslib.com

manuals search engine

18

Chapter 6: Installing and Using the Wireless-B Internet Video Camera Viewer & Recorder Utility

Installing the Viewer & Recorder Utility

Wireless-B Internet Video Camera

3.

The

Choose Destination Location

screen will appear. To install the Viewer & Recorder Utility files in the default

folder, click the

Next

button. To select a different folder, click the

Browse

button and follow the on-screen

directions.

4.

The

Select Program Folder

screen will appear. To add program icons to the default folder, click the

Next

button. If you wish, you can rename the default folder. To add program icons to an existing folder, select one

from the Existing Folders listed, and then click the

Next

button.

5.

After the OCX plug-in for video streaming has been installed, the screen shown in Figure 6-5 will appear.

Click the

OK

button.

6.

When the setup is complete, click the

OK

button. (See Figure 6-6.)

To learn how to use the Viewer & Recorder Utility, proceed to the next section, “Using the Viewer &

Recorder Utility.”

To set up the Linksys SoloLink Service, go to “Chapter 7: Setting up the Linksys SoloLink DDNS Service.”

Advanced users: If you want to use the Camera’s Web-based Utility, go to “Chapter 8: Using the

Wireless-B Internet Video Camera Web-based Utility.”

Figure 6-3: Choose Destination Location

Figure 6-4: Select Program Folder

Figure 6-5: OCX Plug-in

Figure 6-6: Setup Complete

Downloaded from

www.Manualslib.com

manuals search engine