Page 11 / 87 Scroll up to view Page 6 - 10
4
Chapter 2: Planning Your Wireless Network
Introduction
Wireless-B Internet Video Camera
Chapter 2: Planning Your Wireless Network
Introduction
A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each
computer in the WLAN uses a wireless device to connect to the network. Computers and other devices, such as
peripherals, in a WLAN share the same frequency channel and SSID, which is an identification name for wireless
devices.
Ad-Hoc and Infrastructure Modes
Unlike wired networks, wireless networks have two different modes in which they may be set up: infrastructure
and ad-hoc.
An infrastructure configuration is a WLAN and wired LAN communicating to each other through an
access point. An ad-hoc configuration is wireless-equipped computers communicating directly with each other.
Choosing between these two modes depends on whether or not the wireless network needs to share data or
peripherals with a wired network or not.
If the computers on the wireless network need to be accessed by a wired network or need to share a peripheral,
such as a printer, with the wired network computers, the wireless network should be set up in infrastructure
mode. The basis of infrastructure mode centers around an access point, which serves as the main point of
communications in a wireless network. (A wireless router can also be used because a wireless router
incorporates the capabilities of an access point.) Access points transmit data to PCs equipped with wireless
network cards, which can roam within a certain radial range of the access point.
Multiple access points can be
arranged to work in succession to extend the roaming range, and can be set up to communicate with your
Ethernet (wired) hardware as well.
If the wireless network is relatively small and needs to share resources only with the other computers on the
wireless network, then the ad-hoc mode can be used. Ad-hoc mode allows computers equipped with wireless
transmitters and receivers to communicate directly with each other, eliminating the need for an access point.
The drawback of this mode is that, in Ad-Hoc mode, wireless-equipped computers are not able to communicate
with computers on a wired network. And, of course, communication between the wireless-equipped computers
is limited by the distance and interference directly between them.
Network Layout
The Wireless-B Internet Video Camera is compatible with all 802.11b and 802.11g routers, such as model
numbers BEFW11S4 and WRT54G, as well as access points, including model numbers WAP11 and WAP54G. The
Infrastructure:
configuration in which
a wireless network is bridged to a
wired network via an access point.
LAN (Local Area Network):
the
computers and networking products
that make up the network in your home
or office.
Ad-hoc:
a group of wireless devices
communicating directly to each other
(peer-to-peer) without the use of an
access point.
WLAN (Wireless Local Area
Network)
: A group of computers and
associated devices that communicate
with each other wirelessly.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 87
5
Chapter 2: Planning Your Wireless Network
Network Layout
Wireless-B Internet Video Camera
Camera will also communicate with network adapters, such as the Wireless-B and Wireless-G Network Adapters
(model numbers WPC11 and WPC54G) for your laptop computers, Wireless-B and Wireless-G PCI Adapters (model
numbers WMP11 and WMP54G) for your desktop PCs, and Wireless-B USB Adapter (model number WUSB11) for
your computer when you want to enjoy USB connectivity.
With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com
for more information about products that work with the Wireless-B Internet Video Camera.
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 87
6
Chapter 3: Getting to Know the Wireless-B Internet Video Camera
Camera LEDs
Wireless-B Internet Video Camera
Chapter 3: Getting to Know the Wireless-B Internet Video
Camera
Camera LEDs
The Camera has four LEDs to let you know how the Camera is functioning.
Ready
Green. The
Ready
LED lights up when the Camera is powered on. It flashes while the Camera
is initializing and is steadily lit when the Camera is ready for use.
Act/Link
Green. The
Act/Link
LED flashes when there is activity.
LAN
Green. The
LAN
LED lights up when there is a connection to a wired network. It flashes when
data is transmitted to or received from the wired network.
Wireless
Green. The
Wireless
LED lights up when there is a connection to a wireless network. It flashes
when data is transmitted to or received from the wireless network.
Camera Head
The Camera head and its focus ring allow you to modify the aim and focus of the Camera.
To alter the Camera’s aim, swivel the Camera head.
To adjust the Camera’s focus, rotate the dark gray focus ring.
Figure 3-1: Camera LEDs
Figure 3-2: Camera Head
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 87
7
Chapter 3: Getting to Know the Wireless-B Internet Video Camera
Camera Ports
Wireless-B Internet Video Camera
Camera Ports
The Camera features two ports and a Reset button on the bottom panel.
Power
The
Power
port is where you will connect the power adapter.
LAN
The
LAN
port is where you will connect the Ethernet network cable.
(Reset)
The
Reset
button is what you will press if you need to reset the Camera. Insert a paper clip
into the opening next to the LAN port. Then press the button and hold it in for five seconds.
Figure 3-3: Camera Ports
Important:
Resetting the Camera will erase all
of your settings, such as WEP encryption
information, and replace them with the factory
defaults. Do not reset the Camera if you want
to retain these settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 87
8
Chapter 4: Connecting the Wireless-B Internet Video Camera for Setup
Overview
Wireless-B Internet Video Camera
Chapter 4: Connecting the Wireless-B Internet Video Camera
for Setup
Overview
Before you set up the Camera, connect it to a wired or wireless network. Proceed to the appropriate section for
your setup.
If you need to move the Camera from a wired network to a wireless network, or vice versa, go to this section,
“Moving the Camera to a Different Network.”
Connection to a Wired Network for Setup
1.
Connect the Ethernet network cable to your router or switch. If you want to connect the Camera directly to
your PC, use a crossover Ethernet network cable (not included).
2.
Connect the other end of the cable to the LAN port on the Camera. See Figure 4-1.
3.
Connect the power adapter to the Power port on the Camera.
4.
Plug the power adapter into an electrical outlet.
The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready
and LAN LEDs are solidly lit.
Proceed to “Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera.”
Connection to a Wireless Ad-Hoc Network for Setup
1.
Make sure your computer has the following wireless settings:
SSID - linksys
Network Mode - Ad-Hoc
Channel - 6
WEP - Disabled
2.
Connect the power adapter to the Power port on the Camera.
NOTE:
You MUST connect the Camera to a PC,
router, or switch using the Ethernet network
cable BEFORE powering on the Camera.
Otherwise, the Camera will not function.
Figure 4-2: Connect the Power Adapter
Figure 4-1: Connect the Ethernet Network Cable
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top