1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WTR54GS
    5. /
  5. 14
Page 66 / 86 Scroll up to view Page 61 - 65
60
Appendix C: Upgrading Firmware
Wireless-G Travel Router with SpeedBooster
Appendix C: Upgrading Firmware
The Broadband Router's firmware is upgraded through the Web-based Utility's Administration tab. Do not
upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature
you want to use.
To upgrade the Router’s firmware, follow these instructions:
1.
Download the firmware from Linksys's website at
www.linksys.com/international
. Then extract the firmware
file.
2.
Click
Firmware Upgrade
from the Web-Utility's Administration tab, and the
Upgrade Firmware
screen will
appear.
3.
Enter the location of the extracted firmware file or click the
Browse
button to find the file.
4.
Then click the
Upgrade
button and follow the on-screen instructions.
Figure C-1: Administration Tab - Firmware Upgrade
Note:
The Router will lose all of the settings you have customized. Before you upgrade its firmware,
write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 67 / 86
61
Appendix D: Windows Help
Wireless-G Travel Router with SpeedBooster
Appendix D: Windows Help
Almost all Linksys wireless products require Microsoft Windows. Windows is the most used operating system in
the world and comes with many features that help make networking easier. These features can be accessed
through Windows Help and are described in this appendix.
TCP/IP
Before a computer can communicate with the Broadband Router, TCP/IP must be enabled. TCP/IP is a set of
instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well.
Your PCs will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides
complete instructions on enabling TCP/IP.
Shared Resources
If you wish to share printers, folder, or files over your network, Windows Help provides complete instructions on
utilizing shared resources.
Network Neighborhood/My Network Places
Other PCs on your network will appear under Network Neighborhood or My Network Places (depending upon the
version of Windows you're running). Windows Help provides complete instructions on adding PCs to your
network.
Downloaded from
www.Manualslib.com
manuals search engine
Page 68 / 86
62
Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
Windows 98SE or Me Instructions
Wireless-G Travel Router with SpeedBooster
Appendix E: Finding the MAC Address and IP Address for Your
Ethernet Adapter
This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC
filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s
Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the
steps in this appendix to find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.
Windows 98SE or Me Instructions
1.
Click
Start
and
Run
. In the
Open
field, enter
winipcfg
. Then press the
Enter
key or the
OK
button.
2.
When the
IP Configuration
screen appears, select the Ethernet adapter you have connected to the Router via a
Category 5 Ethernet network cable.
3.
Write down the Adapter Address as shown on your computer screen. This is the MAC address for your
Ethernet adapter and is shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.
In the example shown, the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show
something different.
Windows 2000 or XP Instructions
1.
Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press the
Enter
key or click the
OK
button.
2.
At the command prompt, enter
ipconfig /all
. Then press the
Enter
key.
Figure E-2: MAC Address/Adapter Address
Figure E-1: IP Configuration Screen
Note:
The MAC address is also called the Adapter Address.
Figure E-3: MAC Address/Physical Address
Downloaded from
www.Manualslib.com
manuals search engine
Page 69 / 86
63
Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
For the Router’s Web-based Utility
Wireless-G Travel Router with SpeedBooster
3.
Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
In the exampleshown, the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show
something different.
For the Router’s Web-based Utility
For MAC filtering, enter the 12-digit MAC address.
For MAC address cloning, enter the 12-digit MAC address in the
MAC Address
fields provided, two digits per field.
Figure E-4: Wireless MAC Filter List
Note:
The MAC address is also called the Physical Address.
Figure E-5: MAC Address Clone
Downloaded from
www.Manualslib.com
manuals search engine
Page 70 / 86
64
Appendix F: Glossary
Wireless-G Travel Router with SpeedBooster
Appendix F: Glossary
802.11a
- A wireless networking standard that specifies a maximum data transfer rate of 54Mbps and an
operating frequency of 5GHz.
802.11b
- A wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an
operating frequency of 2.4GHz.
802.11g
- A wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating
frequency of 2.4GHz, and backward compatibility with 802.11b devices.
Access Point
- A device that allows wireless-equipped computers and other devices to communicate with a
wired network. Also used to expand the range of a wireless network.
Adapter
- A device that adds network functionality to your PC.
Ad-hoc
- A group of wireless devices communicating directly with each other (peer-to-peer) without the use of
an access point.
AES
(
A
dvanced
E
ncryption
S
tandard) - A security method that uses symmetric 128-bit block data encryption.
Backbone
- The part of a network that connects most of the systems and networks together, and handles the
most data.
Bandwidth
- The transmission capacity of a given device or network.
Beacon Interval
- Data transmitted on your wireless network that keeps the network synchronized.
Bit
- A binary digit.
Boot
- To start a device and cause it to start executing instructions.
Bridge
- A device that connects different networks.
Broadband
- An always-on, fast Internet connection.
Browser
- An application program that provides a way to look at and interact with all the information on the
World Wide Web.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top