Page 26 / 49 Scroll up to view Page 21 - 25
Chapter 3
Advanced Configuration
22
Wireless-G Broadband Router with SpeedBooster
Status > Router
The
Status > Router
screen displays the Router’s current
status.
Status > Router
Router Information
Firmware Version
The Router’s current firmware is
displayed.
Firmware
Verification
The
verification
code
is
displayed.
Current Time
The time, which you set on the Setup tab,
is displayed.
MAC Address
The Router’s MAC Address, as seen by your
ISP, is displayed.
Router Name
The specific name for the Router, which
you set on the Setup tab, is displayed.
Host Name
If required by your ISP, this would have been
entered on the Setup tab.
Domain Name
If required by your ISP, this would have
been entered on the Setup tab.
Internet
Configuration Type
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the
Setup > Basic
Setup
screen.
Click
Refresh
to update the on-screen information.
Status > Local Network
The
Status > Local Network
screen displays the status of
your network.
Status > Local Network
Local Network
MAC Address
The Router’s MAC Address, as seen on your
local, Ethernet network, is displayed.
IP Address
The Router’s IP Address, as it appears on your
local, Ethernet network, is displayed.
Subnet Mask
The current subnet mask configured for
your local network is displayed.
DHCP Server
If you are using the Router as a DHCP server,
then the status is displayed.
Start IP Address
For the range of IP Addresses used by
devices on your local, Ethernet network, the beginning of
that range is displayed.
End IP Address
For the range of IP Addresses used by
devices on your local, Ethernet network, the end of that
range is displayed.
DHCP Clients Table
Clicking this button will open a
screen to show you which computers are using the Router
as a DHCP server. You can delete computers from that list,
and sever their connections; select
Delete
and click the
Delete
button.
DHCP Clients Table
Click
Refresh
to update the on-screen information.
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 49
Chapter 3
Advanced Configuration
23
Wireless-G Broadband Router with SpeedBooster
Status > Wireless
The
Status > Wireless
screen displays the status of your
wireless network.
Status > Wireless
Wireless
MAC Address
The Router’s MAC Address, as seen on your
local, wireless network, is displayed.
Mode
As selected from the
Wireless > Basic Wireless
Settings
screen, The wireless mode (Mixed, G-Only, B-Only,
or Disabled) used by the network is displayed.
SSID
As entered on the
Wireless > Basic Wireless Settings
screen, the wireless network name or SSID is displayed.
DHCP Server
The status of the DHCP server function is
displayed.
Channel
As entered on the
Wireless > Basic Wireless
Settings
screen, The channel on which your wireless
network is broadcasting is displayed.
Encryption Function
As selected on the
Wireless >
Wireless Security
screen, the status of the Router’s wireless
security is displayed.
Click
Refresh
to update the on-screen information.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 49
Appendix A
Troubleshooting
24
Wireless-G Broadband Router with SpeedBooster
Appendix A:
Troubleshooting
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connect
to the Internet:
Make sure that the Router is powered on. The Power
LED should be green and not flashing.
If the Power LED is flashing, then power off all of
your network devices, including the modem, Router,
and computers. Then power on each device in the
following order:
Cable or DSL modem
1.
Router
2.
Computer
3.
Check the cable connections. The computer should
be connected to one of the ports numbered 1-4 on
the Router, and the modem must be connected to the
Internet port on the Router.
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service. To use the Router, you need a cable/DSL modem
and high-speed Internet connection.
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the Router, it will automatically
connect to your Internet Service Provider (ISP), so you no
longer need to connect manually.
The DSL telephone line does not fit into the Router’s
Internet port.
The Router does not replace your modem. You still need
your DSL modem in order to use the Router. Connect
the telephone line to the DSL modem, insert the setup
CD into your computer, and then follow the on-screen
instructions.
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
Select
1.
Tools
>
Internet Options
.
Click the
2.
Connections
tab.
Select
3.
Never dial a connection
.
Click
4.
OK
.
The Router does not have a coaxial port for the cable
connection.
The Router does not replace your modem. You still need
your cable modem in order to use the Router. Connect your
cable connection to the cable modem, insert the setup
CD into your computer, and then follow the on-screen
instructions.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same
on both the computer and the Router. If you have enabled
wireless security, then make sure the same security
method and key are used by both the computer and the
Router.
You need to modify the settings on the Router.
Open the web browser (for example, Internet Explorer or
Firefox), and enter the Router’s IP address in the address
field (the default IP address is
192.168.1.1
). When
prompted, leave the
User name
field blank and enter the
password to the Router (the default is
admin
). Click the
appropriate tab to change the settings.
WEB:
If your questions are not addressed here,
refer to the Linksys website,
www.linksys.com
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 49
Appendix B
Specifications
25
Wireless-G Broadband Router with SpeedBooster
Appendix B:
Specifications
Model
WRT54GS2
Standards
IEEE 802.3, IEEE 802.3u,
IEEE 802.11g, IEEE 802.11b
Channels
11 Channels (US, Canada)
13 Channels (Europe, Japan)
Ports
Internet, Ethernet (1-4), Power
Button
Reset, Wi-Fi Protected Setup™
Cabling Type
CAT5
LEDs
Power, Internet, Ethernet (1-4),
Wireless, Wi-Fi Protected Setup™
Number of Antennas 2 Internal Antennas
Detachable (y/n)
No
RF Power Output
18 dBm
UPnP able/cert
Able
Security Features
Stateful Packet Inspection (SPI)
Firewall, Internet Policy
Wireless Security
Wi-Fi Protected Access™ 2 (WPA2),
WEP, Wireless MAC Filtering
Security Key Bits
128 Bits
Environmental
Dimensions
7.99" x 1.38" x 6.30"
(203 x 35 x 160 mm)
Weight
9.88 oz (280 g)
Power
External, 12V DC, 0.5A
Certifications
FCC, UL, ICES-003, RSS210, CE, Wi-Fi
CERTIFIED™ (802.11b, 802.11g),
WPA2™, WMM®, Wi-Fi Protected
Setup™
Operating Temp.
32 to 104ºF (0 to 40ºC)
Storage Temp.
-4 to 140ºF (-20 to 60ºC)
Operating Humidity
10 to 85%, Noncondensing
Storage Humidity
5 to 90%, Noncondensing
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 49
Appendix C
Warranty Information
26
Wireless-G Broadband Router with SpeedBooster
Appendix C:
Warranty Information
Limited Warranty
Linksys warrants this Linksys hardware product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
This limited warranty is non-transferable and extends only
to the original end-user purchaser. Your exclusive remedy
and Linksys’ entire liability under this limited warranty
will be for Linksys, at its option, to (a) repair the product
with new or refurbished parts, (b) replace the product
with a reasonably available equivalent new or refurbished
Linksys product, or (c) refund the purchase price of the
product less any rebates. Any repaired or replacement
products will be warranted for the remainder of the
original Warranty Period or thirty (30) days, whichever is
longer. All products and parts that are replaced become
the property of Linksys.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys, (c)
the product damage was caused by use with non-Linksys
products, (d) the product has not been installed, operated,
repaired, or maintained in accordance with instructions
supplied by Linksys, (e) the product has been subjected to
abnormal physical or electrical stress, misuse, negligence,
or accident, (f) the serial number on the Product has been
altered, defaced, or removed, or (g) the product is supplied
or licensed for beta, evaluation, testing or demonstration
purposes for which Linksys does not charge a purchase
price or license fee.
ALL
SOFTWARE
PROVIDED
BY
LINKSYS
WITH
THE
PRODUCT,
WHETHER
FACTORY
LOADED
ON
THE
PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING
THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY
OF ANY KIND. Without limiting the foregoing, Linksys does
not warrant that the operation of the product or software
will be uninterrupted or error free. Also, due to the
continual development of new techniques for intruding
upon and attacking networks, Linksys does not warrant
that the product, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack. The product
may include or be bundled with third party software or
service offerings. This limited warranty shall not apply to
such third party software or service offerings. This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require.
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF THE
WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED
CONDITIONS,
REPRESENTATIONS
AND
WARRANTIES,
INCLUDING,
BUT
NOT
LIMITED
TO,
ANY
IMPLIED
WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.
Some jurisdictions do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you. This limited warranty gives you specific legal
rights, and you may also have other rights which vary by
jurisdiction.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty
or remedy provided under this limited warranty fails of
its essential purpose. Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you.
Obtaining Warranty Service
If you have a question about your product or experience a
problem with it, please go to
www.linksys.com/support
where you will find a variety of online support tools and
information to assist you with your product. If the product
proves defective during the Warranty Period, contact
Linksys Technical Support for instructions on how to
obtain warranty service. The telephone number for Linksys
Technical Support in your area can be found in the product
User Guide and at
www.linksys.com
. Have your product
serial number and proof of purchase on hand when calling.
A DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED
TO PROCESS WARRANTY CLAIMS. If you are requested to
return your product, you will be given a Return Materials
Authorization (RMA) number. You are responsible for
properly packaging and shipping your product to Linksys
at your cost and risk. You must include the RMA number
and a copy of your dated proof of original purchase when
returning your product. Products received without a RMA
number and dated proof of original purchase will be
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top