1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT54GS2
    5. /
  5. 5
Page 21 / 49 Scroll up to view Page 16 - 20
Chapter 3
Advanced Configuration
17
Wireless-G Broadband Router with SpeedBooster
Port Services
To add a service, enter the service’s name in the
Service
Name
field. Select its protocol from the
Protocol
drop-
down menu, and enter its range in the
Port Range
fields.
Then click
Add
.
To modify a service, select it from the list on the right.
Change its name, protocol setting, or port range. Then
click
Modify
.
To delete a service, select it from the list on the right. Then
click
Delete
.
When you are finished making changes on the
Port
Services
screen, click
Apply
to save the changes. If you
want to cancel your changes, click
Cancel
. To close the
Port Services
screen and return to the
Access Restrictions
screen, click
Close
.
Website Blocking by URL Address
If you want to block websites with specific URL addresses,
enter each URL in a separate field next to
Website Blocking
by URL Address
.
Website Blocking by Keyword
If you want to block websites using specific keywords,
enter each keyword in a separate field next to
Website
Blocking by Keyword
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Applications and Gaming > Port Range
Forward
The
Applications & Gaming > Port Range Forward
screen
allows you to set up public services on your network, such as
web servers, ftp servers, e-mail servers, or other specialized
Internet applications. (Specialized Internet applications are
any applications that use Internet access to perform functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)
Applications and Gaming > Port Range Forward
Port Range Forward
To forward a port, enter the information on each line for
the criteria required.
Application
In this field, enter the name you wish to give
the application. Each name can be up to 12 characters.
Start/End
This is the port range. Enter the number that
starts the port range in the Start column and the number
that ends the range in the End column.
Protocol
Select the protocol used for this application,
either
TCP
or
UDP
, or
Both
.
IP Address
For each application, enter the IP Address of
the computer running the specific application.
Enable
Select
Enable
to enable port forwarding for the
relevant application.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 49
Chapter 3
Advanced Configuration
18
Wireless-G Broadband Router with SpeedBooster
Applications & Gaming > Port Triggering
The
Applications & Gaming > Port Triggering
screen allows
the Router to watch outgoing data for specific port
numbers. The IP address of the computer that sends the
matching data is remembered by the Router, so that when
the requested data returns through the Router, the data is
pulled back to the proper computer by way of IP address
and port mapping rules.
Applications and Gaming > Port Triggering
Port Triggering
Application
Enter the application name of the trigger.
Triggered Range
For each application, list the triggered port number range.
Check with the Internet application documentation for
the port number(s) needed.
Start Port
Enter the starting port number of the Triggered
Range.
End Port
Enter the ending port number of the Triggered
Range.
Forwarded Range
For each application, list the forwarded port number
range. Check with the Internet application documentation
for the port number(s) needed.
Start Port
Enter the starting port number of the
Forwarded Range.
End Port
Enter the ending port number of the Forwarded
Range.
Enable
Select
Enable
to enable port triggering for the
applicable application.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Applications and Gaming > DMZ
The DMZ feature allows one network computer to be
exposed to the Internet for use of a special-purpose
service such as Internet gaming or videoconferencing.
DMZ hosting forwards all the ports at the same time to
one computer. The Port Range Forward feature is more
secure because it only opens the ports you want to have
opened, while DMZ hosting opens all the ports of one
computer, exposing the computer to the Internet.
Applications and Gaming > DMZ
DMZ
Any computer whose port is being forwarded must have
its DHCP client function disabled and should have a new
static IP address assigned to it because its IP address may
change when using the DHCP function.
To expose one computer, select
Enable
. Then, enter the
computer’s IP address in the
DMZ Host IP Address
field. This
feature is disabled by default.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Applications and Gaming > QoS
Quality of Service (QoS) ensures better service to
high-priority
types
of
network
traffic,
which
may
involve
demanding,
real-time
applications,
such
as
videoconferencing.
There are three types of QoS available: Device Priority,
Ethernet Port Priority, and Application Priority.
QoS
Enable/Disable
To enable QoS, select
Enable
. Otherwise,
select
Disable
. QoS is disabled by default.
Upstream Bandwidth
Select
Auto
or
Manual
from
the drop-down menu. Manual allows you to specify the
maximum outgoing bandwidth that applications can
utilize.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 49
Chapter 3
Advanced Configuration
19
Wireless-G Broadband Router with SpeedBooster
Applications and Gaming > QoS
Device Priority
Enter the name of your network device in the
Device name
field, enter its MAC Address, and then select its priority
from the drop-down menu.
Ethernet Port Priority
Ethernet Port Priority QoS allows you to prioritize
performance for the Router’s four ports, LAN Ports 1-4.
For
each port, select
the priority and flow control setting.
Priority
Select
High
or
Low
in the Priority column. The
Router’s four ports have been assigned low priority by
default.
Flow Control
If you want the Router to control the
transmission of data between network devices, select
Enable
. To disable this feature, select
Disable
. Ethernet
Port Priority QoS does not require support from your ISP
because the prioritized ports LAN ports 1-4 are in your
network. This feature is enabled by default.
Application Priority
Application Priority QoS manages information as it is
transmitted and received. Depending on the settings of
the
QoS
screen, this feature will assign information a high
or low priority for the applications that you specify.
Optimize
Gaming
Applications
Select
this
to
automatically allow common game application ports
to have a higher priority. These games include, but are
not limited to:
Counter-Strike
,
Half-Life
,
Age of Empires
,
EverQuest
,
Quake2
/
Quake3
, and
Diablo II
. The default
setting is unselected.
Application Name
Enter the name you wish to give the
application in the
Application Name
field.
Priority
Select
Highest
,
High
,
Medium
, or
Low
to assign
priority to the application. The default selection is
Low
.
Specific
Port
#
Enter
the
port
number
for
the
application.
Wireless QoS
WMM
Support
Wi-Fi
Multimedia
(WMM),
formerly
known as Wireless Multimedia Extensions (WME), is
a Wi-Fi Alliance certified feature, based on the IEEE
802.11e standard. This feature provides QoS to wireless
networks. It is especially suitable for voice, music and
video applications; for example, Voice over IP (VoIP), video
streaming, and interactive gaming. If you have other
devices on your wireless network that support WMM,
select
Enable
. Otherwise, keep the default,
Disable
.
No Acknowledgement
This feature prevents the Router
from re-sending data if an error occurs. To use this feature,
select
Enable
. Otherwise, keep the default setting,
Disable
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Management
The
Administration > Management
screen allows the
network’s
administrator
to
manage
specific
Router
functions for access and security.
Administration > Management
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 49
Chapter 3
Advanced Configuration
20
Wireless-G Broadband Router with SpeedBooster
Router Password
Local Router Access
Router Password
Enter a new Password for the Router.
Re-enter to confirm
Enter the Password again to confirm.
Web Access
Access Server
HTTP (HyperText Transport Protocol) is
the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security.
Select
HTTP
or
HTTPS.
The default selection is
HTTP
.
Wireless Access Web
If you are using the Router in
a public domain where you are giving wireless access
to your guests, you can disable wireless access to the
Router’s web-based utility. You will only be able to access
the web-based utility via a wired connection if you disable
the setting. Keep the default,
Enable
, to enable wireless
access to the Router’s web-based utility, or select
Disable
to disable wireless access to the utility.
Remote Router Access
Remote Management
To access the Router remotely,
from outside the network, select
Enable
.
Management Port
Enter the port number that will be
open to outside access. You will need to enter the Router’s
password when accessing the Router this way, as usual.
Use https
To require the use of HTTPS for remote access,
select this feature.
UPnP
UPnP
Keep the default,
Enable
to enable the UPnP
feature; otherwise, select
Disable
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Log
The Router can keep logs of all traffic for your Internet
connection.
Administration > Log
Log
Log
To disable the Log function, keep the default setting,
Disable
. To monitor traffic between the network and the
Internet, select
Enable
.
When you wish to view the logs, click
Incoming Log
or
Outgoing Log
, depending on which you wish to view.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network components.
Administration > Diagnostics
Ping Test
Ping
The Ping test checks the status of a connection. Click
Ping
to open the
Ping Test
screen. Enter the address of the
computer whose connection you wish to test and how
many times you wish to test it. Then, click
Ping
. The
Ping
Test
screen will show if the test was successful. To stop the
test, click
Stop
. Click
Clear Log
to clear the screen. Click
Close
to return to the
Diagnostics
screen.
The Ping Test
Traceroute Test
Traceroute
To test the performance of a connection,
click
Traceroute
to open the
Traceroute Test
screen. Enter
the address of the computer whose connection you wish
to test and click
Traceroute
. The
Traceroute Test
screen will
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 49
Chapter 3
Advanced Configuration
21
Wireless-G Broadband Router with SpeedBooster
show if the test was successful. To stop the test, click
Stop
.
Click
Clear Log
to clear the screen. Click
Close
to return to
the
Diagnostics
screen.
The Traceroute Test
Administration > Factory Defaults
The
Administration > Factory Defaults
screen allows you
to restore the Router’s configuration to its factory default
settings.
Factory Defaults
Restore Factory Defaults
To reset the Router’s settings
to the default values, select
Yes
, and then click
Save
Settings
. Any settings you have saved will be lost when
the default settings are restored.
Administration > Factory Defaults
Administration > Upgrade Firmware
The
Administration > Upgrade
Firmware
screen allows
you to upgrade the Router’s firmware. Do not upgrade
the firmware unless you are experiencing problems with
the Router or the new firmware has a feature you want
to use.
Administration > Upgrade Firmware
Before upgrading the firmware, download the Router’s
firmware upgrade file from the Linksys website, www.
linksys.com. Then extract the file.
Upgrade Firmware
Please select a file to upgrade
Click
Browse
and select
the extracted firmware upgrade file. Then c
lick
Upgrade
and follow the on-screen instructions.
Administration > Config Management
This screen is used to back up or restore the Router’s
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router’s configuration file, click
Backup
.
Then follow the on-screen instructions.
Restore Configuration
Please select a file to restore
Click
Browse
and select
the configuration file. Then click
Restore
.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top