1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRP400
    5. /
  5. 28
Page 136 / 155 Scroll up to view Page 131 - 135
C
Cisco WRP400 User Guide
134
Regulatory Information
This appendix includes the following regulatory statements:
•
“Federal Communications Commission Interference Statement,” on
page 134
•
“Safety Notices and Information,” on page136
•
“Industry Canada Statement,” on page 137
•
“Avis d’Industrie Canada,” on page 138
•
“Telepermit Statement,” on page 139
•
“Statement 287—Declaration of Conformity to R&TTE Directive 1999/
5/EC for the European Community, Switzerland, Norway, Iceland and
Liechtenstein,” on page 139
•
“CE Marking,” on page142
•
“National Restrictions,” on page 143
•
“Product Usage Restrictions,” on page 146
•
“User Information for Consumer Products Covered by EU Directive
2002/96/EC on Waste Electric and Electronic Equipment (WEEE),” on
page 146
Federal Communications Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Page 137 / 155
Regulatory Information
Cisco WRP400 User Guide
135
C
This product has been tested and complies with the specifications for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which is found by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment or devices
•
Connect the equipment to an outlet other than the receiver’s
•
Consult a dealer or an experienced radio/TV technician for assistance
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 25 cm between the radiator and your body.
This device has been tested and passed co-located EMC / RF exposure test with
the following three 3G cards, as described in this filing. Other 3G cards with
substantially similar physical dimensions, construction, and electrical and RF
characteristics may or may not comply with FCC rule, please consult manufacture
before purchase.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the
USA is firmware-limited to channels 1 through 11.
Item
Brand
Name
Model
Name
FCC
ID
1
Sierra Wireless,
Inc.
AirCard 595U
N7N-MC5725U
2
Novatel Wireless,
Inc.
U720
PKRNVWMCD3000
3
Novatel Wireless,
Inc.
U727
PKRNVWMCD727
Page 138 / 155
Regulatory Information
Cisco WRP400 User Guide
136
C
Safety Notices and Information
!
CAUTION:
•
To reduce the risk of fire, use only No.26
AWG or larger telecommunication line cord.
•
Do not use this product near water, for
example, in a wet basement or near a
swimming pool.
•
Avoid using this product during an electrical
storm. There may be a remote risk of
electric shock from lightning.
WARNING:
This product contains lead,
known to the State of California to cause
cancer, and birth defects or other reproductive
harm. Wash hands after handling.
WARNING:
This equipment will be inoperable
when main power fails.
WARNING:
Many Internet phone service
providers do not support calls to emergency
service numbers (000 in Australia or 111 in
New Zealand). An alternative phone should be
used to make emergency calls.
Page 139 / 155
Regulatory Information
Cisco WRP400 User Guide
137
C
Industry Canada Statement
This device complies with Industry Canada ICES-003 rule.
Operation is subject to the following two conditions:
1.
This device may not cause interference and
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
Industry Canada Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 25 cm between the radiator & your body.
This device has been tested and passed co-located EMC / RF exposure test with
the following three 3G cards, as described in this filing. Other 3G cards with
substantially similar physical dimensions, construction, and electrical and RF
characteristics may or may not comply with FCC rule, please consult manufacture
before purchase.
WARNING:
To ensure compliance with
explosure limits to radiofrequency fields, the
antenna of the WRP400 should be no closer
than 20 cm from the body during use.
Item
Brand
Name
Model
Name
FCC
ID
1
Sierra Wireless,
Inc.
AirCard 595U
N7N-MC5725U
2
Novatel Wireless,
Inc.
U720
PKRNVWMCD3000
3
Novatel Wireless,
Inc.
U727
PKRNVWMCD727
Page 140 / 155
Regulatory Information
Cisco WRP400 User Guide
138
C
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Avis d’Industrie Canada
Cet appareil numérique de la classe B est conforme aux normes NMB-003 et
RSS210 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
1.
il ne doit pas produire de brouillage et
2.
il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
Afin de réduire le risque d’interférence aux autres utilisateurs, le type d’antenne
et son gain doivent être choisis de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour
obtenir une communication satisfaisante.
Avis d’Industrie Canada concernant l’exposition aux
radiofréquences :
Ce matériel est conforme aux limites établies par IC en matière d’exposition aux
radiofréquences dans un environnement non contrôlé. Ce matériel doit être installé
et utilisé à une distance d’au moins 25 cm entre l’antenne et le corps de l’utilisateur.
L’émetteur ne doit pas être placé près d’une autre antenne ou d’un autre émetteur,
ou fonctionner avec une autre antenne ou un autre émetteur.
Wireless Disclaimer
The maximum performance for wireless is derived from IEEE Standard 802.11
specifications. Actual performance can vary, including lower wireless network
capacity, data throughput rate, range and coverage. Performance depends on
many factors, conditions and variables, including distance from the access point,
volume of network traffic, building materials and construction, operating system
used, mix of wireless products used, interference and other adverse conditions.

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top