1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WAG354G
    5. /
  5. 9
Page 41 / 366 Scroll up to view Page 36 - 40
35
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Applications and Gaming Tab
Wireless-G ADSL Home Gateway
The DMZ Tab
The
DMZ
screen allows one local user to be exposed to the Internet for use of a special-purpose service such as
Internet gaming and videoconferencing through DMZ Hosting. DMZ hosting forwards all the ports for one
computer at the same time, which differs from Port Range Forwarding, which can only forward a maximum of 10
ranges of ports.
•
DMZ Hosting. This feature allows one local user to be exposed to the Internet for use of a special-purpose
service such as Internet gaming and videoconferencing. To use this feature, select
Enable
. To disable DMZ,
select
Disable
.
•
DMZ Host IP Address. To expose one computer, enter the computer’s IP address. To get the IP address of a
computer, refer to “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter.”
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Figure 5-30: DMZ
Page 42 / 366
36
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Applications and Gaming Tab
Wireless-G ADSL Home Gateway
The QoS Tab
QoS
Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve
demanding, real-time applications, such as Internet phone calls or videoconferencing.
Enabled/Disabled
. To use QoS, select
Enable
. Otherwise, keep the default,
Disable
.
Application-based QoS
Application-based QoS manages information as it is transmitted and received. Depending on the settings of the
QoS
screen, this feature will assign information a high or low priority for the five preset applications and three
additional applications that you specify.
High priority/Medium priority/Low priority
. For each application, select
High priority
(traffic on this queue
shares 60% of the total bandwidth),
Medium priority
(traffic on this queue shares 18% of the total bandwidth),
or
Low priority
(traffic on this queue shares 1% of the total bandwidth).
FTP
(File Transfer Protocol). A protocol used to transfer files over a TCP/IP network (Internet, UNIX, etc.). For
example, after developing the HTML pages for a website on a local machine, they are typically uploaded to the
web server using FTP.
HTTP
(HyperText Transport Protocol). The communications protocol used to connect to servers on the World Wide
Web. Its primary function is to establish a connection with a web server and transmit HTML pages to the client
web browser.
Telnet
. A terminal emulation protocol commonly used on Internet and TCP/IP-based networks. It allows a user at
a terminal or computer to log onto a remote device and run a program.
SMTP
(Simple Mail Transfer Protocol). The standard e-mail protocol on the Internet. It is a TCP/IP protocol that
defines the message format and the message transfer agent (MTA), which stores and forwards the mail.
POP3
(Post Office Protocol 3). A standard mail server commonly used on the Internet. It provides a message store
that holds incoming e-mail until users log on and download it. POP3 is a simple system with little selectivity. All
pending messages and attachments are downloaded at the same time. POP3 uses the SMTP messaging protocol.
Specific Port#
. You can add three more applications by entering their respective port numbers in these fields.
When you have finished making changes to this screen, click the
Save Settings
button to save the changes, or
click the
Cancel Changes
button to undo your changes.
Figure 5-31: QoS
Page 43 / 366
37
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
Wireless-G ADSL Home Gateway
The Administration Tab
The Management Tab
The
Management
screen allows you to change the Gateway’s access settings as well as configure the SNMP
(Simple Network Management Protocol), UPnP (Universal Plug and Play), IGMP (Internet Group Multicast
Protocol)-Proxy, and WLAN management features.
Gateway Access
Local Gateway Access. To ensure the Gateway’s security, you will be asked for your password when you access
the Gateway’s Web-based Utility. The default username and password is
admin
.
•
Gateway Userlist. Select the number of the user from the drop-down menu.
•
Gateway Username. Enter the default username,
admin
. It is recommended that you change the default
username to one of your choice.
•
Gateway Password. It is recommended that you change the default password,
admin
, to one of your choice.
•
Re-enter to confirm. Re-enter the Gateway’s new Password to confirm it.
Remote Gateway Access. This feature allows you to access the Gateway from a remote location, via the Internet.
•
Remote Management. This feature allows you to manage the Gateway from a remote location via the Internet.
To enable Remote Management, click
Enable
.
•
Management Port. Enter the port number you will use to remotely access the Gateway.
•
Allowed IP. Specify the IP address(es) allowed to remotely manage the Gateway. To allow all IP addresses with
no restrictions, select
All
. To specify a single IP address, select
IP address
and enter the IP address in the
fields provided. To specify a range of IP addresses, select
IP range
and enter the range of IP addresses in the
fields provided.
Remote Upgrade. This feature allows the Gateway’s firmware to be upgraded remotely by a TFTP server. To
enable Remote Upgrade, click
Enable
.
IMPORTANT:
Enabling remote management allows anyone with your password to configure the
Gateway from somewhere else on the Internet.
Figure 5-32: Management
Figure 5-33: Allowed IP - IP Range
Page 44 / 366
38
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
Wireless-G ADSL Home Gateway
SNMP
SNMP is a popular network monitoring and management protocol. To enable SNMP, click
Enabled
. To disable
SNMP, click
Disabled
.
If enabled, then specify the IP address(es) allowed to have SNMP access. Select
All
to allow all IP addresses with
no restrictions,
IP address
to specify a single IP address, or
IP range
to specify a range of IP addresses.
•
Device Name. Enter the name of the Gateway.
•
SNMP v1/v2: Get Community. Enter the password that allows read-only access to the Gateway’s SNMP
information.
•
Set Community. Enter the password that allows read/write access to the Gateway’s SNMP information.
•
Trap Management: Trap to. Enter the IP address of the remote host computer that will receive the trap
messages.
UPnP
UPnP allows Windows Me and XP to automatically configure the Gateway for various Internet applications, such
as gaming and videoconferencing.
•
UPnP. To enable UPnP, click
Enable
. Otherwise, click
Disable
.
IGMP-Proxy
If your multimedia application or device is not working properly behind the Gateway, then you can enable IGMP-
Proxy to allow multicast traffic through the Gateway.
•
IGMP Proxy. To use this feature, select
Enable
. Otherwise, select
Disable
.
WLAN
•
Management via WLAN. This feature allows the Gateway to be managed by a wireless computer on the local
network when it logs into the Gateway’s Web-based Utility.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Page 45 / 366
39
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
Wireless-G ADSL Home Gateway
The Reporting Tab
The
Reporting
screen provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet
connection. It also provides logs for VPN and firewall events.
Reporting
•
Log. To enable log reporting, click
Enabled
.
•
Logviewer IP Address. Enter the IP Address of the computer that will receive logs. You will need Logviewer
software to view these logs. This free software is available for download from www.linksys.com.
Email Alerts
•
E-Mail Alerts. To enable E-Mail Alerts, click
Enabled
.
•
Denial of Service Thresholds. Enter the number of Denial of Service attacks that will trigger an e-mail alert.
•
SMTP Mail Server. Enter the IP address of the SMTP server.
•
E-Mail Address for Alert Logs. Enter the e-mail address that will receive alert logs.
•
Return E-Mail address. Enter the return address for the e-mail alerts.
To view the logs, click the
View Logs
button. A new screen will appear. From the drop-down menu, you can
select which log you want to view. Click the
Clear
button to clear the log information. Click the
pageRefresh
button to refresh the information. Click the
Previous Page
button to go to the previous page of information. Click
the
Next Page
button to move to the next page of information.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Figure 5-34: Reporting
Figure 5-35: System Log

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top