Page 21 / 41 Scroll up to view Page 16 - 20
19
HiPort User Guide
Chapter 3
Configuration
The Status Tab > Voice
The
Voice
screen displays the status information of your
voice network°
Status > Voice
Information
Firmware Version
The
current
firmware
version
is
displayed°
Line1 Status
SIM Status
The status of your SIM card is displayed°
Registration Status
If the voice network is registered,
the information is displayed here°
Call1, Call2 Status
The status of calls are displayed°
To retrieve the most up-to-date information, click
Refresh
°
Help information is available on the right side of the
screen°
Call Log
To view the
HiPort’s Call Log or Error List, select the
appropriate button° A log or list will display°
To
retrieve
the
most
up-to-date
information,
click
Refresh
°
Page 22 / 41
20
HiPort User Guide
Appendix A
Troubleshooting
Appendix A:
Troubleshooting
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connect
to the Internet:
Make sure that the HiPort is powered on° The Power
LED should be green and not flashing°
If the Power LED is flashing, then power off all of
your network devices, including the modem, HiPort,
and computers° Then power on each device in the
following order:
Cable or DSL modem
HiPort
Computer
Check the cable connections° The computer should
be connected to the Ethernet/PC port on the HiPort,
and the modem must be connected to the Internet
port on the HiPort°
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service° To use the HiPort, you need a cable/DSL modem
and high-speed Internet connection°
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the HiPort, it will automatically
connect to your Internet Service Provider (ISP), so you no
longer need to connect manually°
The DSL telephone line does not fit into the HiPort’s
Internet port.
The HiPort does not replace your modem° You still need
your DSL modem in order to use the HiPort° Connect the
telephone line to the DSL modem, insert the setup CD into
your computer, and then follow the on-screen instructions°
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
Select
Tools
>
Internet Options
°
Click the
Connections
tab°
Select
Never dial a connection
°
Click
OK
°
The HiPort does not have a coaxial port for the cable
connection.
The HiPort does not replace your modem° You still need
your cable modem in order to use the HiPort° Connect your
cable connection to the cable modem, insert the setup
CD into your computer, and then follow the on-screen
instructions°
You need to modify the settings on the HiPort.
Open the web browser (for example, Internet Explorer or
Firefox), and enter the HiPort’s IP address in the address
field (the default IP address is
192.168.29.1
)° When
prompted, leave the
User name
field blank and enter the
password to the HiPort (the default is
admin
)° Click the
appropriate tab to change the settings°
The Power or Phone LED is blinking or lit.
These LEDs indicate the following conditions°
LED
Action
Condition
Power
Blinking
Green
HiPort is booting up°
Power
Blinking
Amber
HiPort is powering up or
performing a firmware upgrade° Do
NOT power off the device°
Power
Blinking
Green/
Amber
HiPort SIM card detection or
registry failed° Check that:
1° SIM card is activated with @Home
service and installed properly°
2° You have an Internet connection°
Power
Solid
Amber
No E911 registered° Please verify
that you have registered for 911
Emergency Calling by going to the
website at
www.mytmobile.com
and log in° You will see a tab labeled
911
that will allow you to verify if
this information has been updated°
Phone
Blinking
Blue
HiPort has received voice mail°
Once you retrieve your voice mail,
the LED will go back to solid blue°
Page 23 / 41
21
HiPort User Guide
Appendix B
Specifications
Appendix B:
Specifications
Model
UTA200-TM
Environmental
Dimensions
4°09" x 5°91" x 1°18"
104 x 150 x 30 mm
Weight
5°82 oz (165 g)
Power
External, 12V DC, 1°0A
Certifications
FCC, UL
Operating Temp°
32 to 104ºF (0 to 40ºC)
Storage Temp°
-4 to 140ºF (-20 to 60ºC)
Operating Humidity
10 to 85%, Noncondensing
Storage Humidity
5 to 90%, Noncondensing
Page 24 / 41
22
HiPort User Guide
Appendix C
Warranty
Appendix C:
Warranty Information
Limited Warranty
Linksys warrants this Linksys hardware product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
This limited warranty is non-transferable and extends only
to the original end-user purchaser° Your exclusive remedy
and Linksys’ entire liability under this limited warranty
will be for Linksys, at its option, to (a) repair the product
with new or refurbished parts, (b) replace the product
with a reasonably available equivalent new or refurbished
Linksys product, or (c) refund the purchase price of the
product less any rebates° Any repaired or replacement
products will be warranted for the remainder of the
original Warranty Period or thirty (30) days, whichever is
longer° All products and parts that are replaced become
the property of Linksys°
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys,
(c) the product damage was caused by use with non-
Linksys products, (d) the product has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, (e) the product has
been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident, (f) the serial number on
the Product has been altered, defaced, or removed, or (g)
the product is supplied or licensed for beta, evaluation,
testing or demonstration purposes for which Linksys does
not charge a purchase price or license fee°
ALL
SOFTWARE
PROVIDED
BY
LINKSYS
WITH
THE
PRODUCT,
WHETHER
FACTORY
LOADED
ON
THE
PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING
THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY
OF ANY KIND° Without limiting the foregoing, Linksys does
not warrant that the operation of the product or software
will be uninterrupted or error free° Also, due to the
continual development of new techniques for intruding
upon and attacking networks, Linksys does not warrant
that the product, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack° The product
may include or be bundled with third party software or
service offerings° This limited warranty shall not apply to
such third party software or service offerings° This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require°
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF THE
WARRANTY PERIOD° ALL OTHER EXPRESS OR IMPLIED
CONDITIONS,
REPRESENTATIONS
AND
WARRANTIES,
INCLUDING,
BUT
NOT
LIMITED
TO,
ANY
IMPLIED
WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED°
Some jurisdictions do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you° This limited warranty gives you specific legal
rights, and you may also have other rights which vary by
jurisdiction°
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES° IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT°
The foregoing limitations will apply even if any warranty
or remedy provided under this limited warranty fails of
its essential purpose° Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you°
Obtaining Warranty Service
If you have any questions about the services provided
by your Service Provider or your Linksys product, please
contact your Service Provider that provided the Linksys
product to you° You also will find a variety of online
support tools and information to assist you with your
product at
www.linksys.com/support
° If the product
proves defective during the Warranty Period, contact your
Service Provider for instructions on how to obtain warranty
service° The telephone number for your Service Provider
in your area can be found in the written documentation
included with your Linksys product°
Have your product serial number and proof of purchase
(if applicable) on hand when calling your Service Provider°
If you are requested to return your product, you will be
given a Return Materials Authorization (RMA) number
and instructions for shipping the product to your Service
Provider° You are responsible for properly packaging and
shipping your product at your cost and risk° You must
include the RMA number and a copy of your dated proof
Page 25 / 41
23
HiPort User Guide
Appendix C
Warranty
of original purchase (if applicable) when returning your
product° Products received without a RMA number and
dated proof of original purchase (if applicable) will be
rejected° Do not include any other items with the product
you are returning° Defective product covered by this limited
warranty will be repaired or replaced and returned to you
without charge° Customers outside of the United States
of America and Canada are responsible for all shipping
and handling charges, custom duties, VAT and other
associated taxes and charges° Repairs or replacements for
your product not covered under this limited warranty will
be subject to charge at Linksys’ then-current rates°
Technical Support
This
limited
warranty
is
neither
a
service
nor
a
support contract° Information about Linksys’ current
technical
support
offerings
and
policies
(including
any
fees
for
support
services)
can
be
found
at
www.linksys.com/support
°
This limited warranty is governed by the laws of the
jurisdiction in which the Linksys product was purchased
by you°
Please direct all inquiries to: Linksys, P°O° Box 18558, Irvine,
CA 92623

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top