Page 21 / 110
Scroll up to view Page 16 - 20
12
Chapter 4: Using the Console Interface for Configuration
Connecting to the Switch through a Telnet Session
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
4.
Set the serial port settings as follows:
Bits per second:
38400
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None
Then, click the
OK
button.
Connecting to the Switch through a Telnet Session
Open a command line editor and enter
. Then, press the
Enter
key.
The
Login
screen will now appear. The first time you open the CLI interface, select
Edit
and hit Enter. Enter
admin
in the
User Name
field. Leave the
Password
field blank.
Press the
Esc
button and you will return to the login screen. Use the right arrow button to navigate to
Execute
and press the
Enter
button to enter the CLI interface.
Figure 4-4: COM1 Properties
Figure 4-5: Telnet Login Screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 110
13
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Configuring the Switch through the Console Interface
The console screens consist of a series of menus. Each menu has several options, which are listed vertically. You
select a menu option when you highlight it; pressing the
Enter
key activates the highlighted option.
To navigate through the menus and actions of the console interface, use the up or down arrow keys to move up or
down, and use the left or right arrow keys to move left or right. Use the Enter key to select a menu option, and use
the Esc key to return to the previous selection. Menu options and any values entered or present will be
highlighted. The bottom of the screen lists the actions available.
Switch Main Menu
The
System Main Menu
screen displays these choices:
1.
System Configuration Information Menu
2.
Port Status
3.
Port Configuration
4.
PoE Configuration
5.
Help
0.
Logout
Figure 4-6: Switch Main Menu
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 110
14
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
System Configuration Menu
On the
System Configuration Menu
screen, you have these choices:
1.
System Information
2.
Management Settings
3.
User & Password Settings
4.
IP Configuration
5.
File Management
6.
Restore System Default Settings
7.
Reboot System
0.
Back to Main Menu
Figure 4-7: System Configuration Menu
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 110
15
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
System Information
Using this screen, you can check the Switch’s firmware versions and general system information.
Versions
The
Versions
screen displays the Switch’s boot, software, loader, and hardware firmware versions.
General Information
The
General System Information
screen displays the Switch’s description, System Up Time, System MAC Address,
System Contact, System Name, and System Location.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
Figure 4-10: General System Information
Figure 4-8: System Information Menu
Figure 4-9: Versions
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 110
16
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Management Settings
From the Management Settings screen, you can set Serial Port Session Configuration.
Serial Port Configuration
On the
Serial Port Configuration
screen, the Switch’s baud rate is displayed.
Select
Edit
and press the
Enter
key to make changes. Toggle to the desired speed and when your changes are
complete, press the
Esc
key to return to the
Action
menu. Select
Save
and press the
Enter
key to save your
changes. To exit, select
Quit
and press the
Enter
key.
Figure 4-11: Management Settings Menu
Figure 4-12: Serial Port Configuration
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live