Page 56 / 81 Scroll up to view Page 51 - 55
Chapter 5
Advanced Configuration
50
8-Port 10/100/1000 Gigabit Switch with Webview
Advanced Table
Management Station
Displays the management station
IP address for which the basic SNMP community is
defined.
Community String
Displays the password used to
authenticate the management station to the device.
Group Name
Displays advanced SNMP communities
group name.
SNMP > Notification Filter
SNMP > Notification Filter
The
Notification Filter
screen permits filtering traps based
on OIDs. Each OID is linked to a device feature or a feature
aspect. The
Notification Filter
screen also allows network
managers to filter notifications.
Filter Name
Contains a list of user-defined notification
filters.
New Object Identifier Subtree
Displays the OID for
which notifications are sent or blocked. If a filter is
attached to an OID, traps or informs are generated and
sent to the trap recipients. Object IDs are selected from
either the Select from List or the Object ID List. there are
two configuration options:
Select from List
Select the OID from the list provided.
Object ID
Enter an OID not offered in the Select from List
option.
Filter Type
Indicates whether informs or traps are sent
regarding the OID to the trap recipients.
Excluded
Restricts sending OID traps or informs.
Included
Sends OID traps or informs.
The
Add to List
button adds the Notification Filter
configuration to the Notification Filter Table at the bottom
of the screen.
SNMP > Notification Recipient
The
Notification Recipient
screen contains information for
defining filters that determine whether traps are sent to
specific users, and the trap type sent. SNMP notification
filters provide the following services:
Identifying Management Trap Targets
Trap Filtering
Selecting Trap Generation Parameters
Providing Access Control Checks
Recipient IP
Indicates the IP address to whom the traps
are sent.
Notification Type
Defines the notification sent. The
possible field values are:
Traps
Indicates traps are sent.
Informs
Indicates informs are sent.
SNMPv1,2
Enables
SNMPv1,2
as
the
Notification
Recipient. Either SNMPv1,2 or SNMPv3 can be enabled at
any one time, but not both at the same time. If SNMPv1,2
is enabled, the Community String and
Notification Version
fields are enabled for configuration:
Community String
Identifies the community string of
the trap manager.
Notification Version
Determines the trap type. The
possible field values are:
SNMP V1
Indicates SNMP Version 1 traps are sent.
SNMP V2
Indicates SNMP Version 2 traps are sent.
SNMPv3
Enables SNMPv3 as the Notification Recipient.
Either SNMPv1,2 or SNMPv3 can be enabled at any one
time, but not both at the same time. If SNMPv3is enabled,
the User Name and Security Level fields are enabled for
configuration:
User Name
Defines the user to whom SNMP notifications
are sent.
Security Level
Defines the means by which the packet is
authenticated. The possible field values are:
No Authentication
Indicates the packet is neither
authenticated nor encrypted.
Authentication
Indicates
the
packet
is
authenticated.
Privacy
Indicates the packet is both authenticated
and encrypted.
Page 57 / 81
Chapter 5
Advanced Configuration
51
8-Port 10/100/1000 Gigabit Switch with Webview
UDP Port
Displays the UDP port used to send notifications.
The default is
162
.
Filter Name
Indicates if the SNMP filter for which the
SNMP Notification filter is defined.
Timeout
Indicates the amount of time (seconds) the
device waits before resending informs. The default is
15
seconds.
Retries
Indicates the amount of times the device resends
an inform request. The default is
3
seconds.
The
Add to List
button adds the Notification Recipient
configuration to the relevant table at the bottom of the
screen.
Admin > User Authentication
The
User Authentication
screen is used to modify user
passwords.
Admin > User Authentication
Authentication Type
Defines the user authentication
methods. Combinations of all the authentication methods
can be selected. The possible field values are:
Local
Authenticates the user at the device level.
The device checks the user name and password for
authentication.
RADIUS
Authenticates the user at the RADIUS server.
TACACS+
Authenticates the user at the TACACS+
server.
None
Assigns no authentication method to the
authentication profile.
User Name
Displays the user name.
Password
Specifies the new password. The password
is not displayed. As it entered an “*” corresponding to
each character is displayed in the field. (Range: 1-159
characters)
Confirm Password
Confirms the new password. The
password entered into this field must be exactly the same
as the password entered in the
Password
field.
The
Add to List button
adds the user configuration to the
Local User’s Table.
Admin > Static Address
Admin > Static Address
A static address can be assigned to a specific interface on
this switch. Static addresses are bound to the assigned
interface and cannot be moved. When a static address is
seen on another interface, the address will be ignored and
will not be written to the address table.
Interface
Displays the interface to which the entry
refers:
Port
The specific port number to which the forwarding
database parameters refer.
LAG
The specific LAG number to which the forwarding
database parameters refer.
MAC Address
Displays the MAC address to which the
entry refers.
VLAN ID
Displays the VLAN ID number to which the entry
refers.
VLAN Name
Displays the VLAN name to which the entry
refers.
Status
Displays how the entry was created. The possible
field values are:
Permanent
The MAC address is permanent.
Page 58 / 81
Chapter 5
Advanced Configuration
52
8-Port 10/100/1000 Gigabit Switch with Webview
Delete on Reset
The MAC address is deleted when
the device is reset.
Delete on Timeout
The MAC address is deleted when
a timeout occurs.
Secure
The MAC Address is defined for locked ports.
Query
Port
Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
The specific port number.
LAG
The specific LAG number.
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID
Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key
Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Dynamic Address
The Dynamic Address Table contains the MAC addresses
learned by monitoring the source address for traffic
entering the switch. When the destination address for
inbound traffic is found in the database, the packets
intended for that address are forwarded directly to the
associated port. Otherwise, the traffic is flooded to all
ports.
Admin > Dynamic Address
The
Dynamic Address
screen contains parameters for
querying information in the Dynamic MAC Address Table,
including the interface type, MAC addresses, VLAN, and
table storing. The Dynamic MAC Address table contains
information about the aging time before a dynamic MAC
address is erased, and includes parameters for querying
and viewing the Dynamic MAC Address table. The Dynamic
MAC Address table contains address parameters by which
packets are directly forwarded to the ports. The Dynamic
Address Table can be sorted by interface, VLAN, and MAC
Address.
Address Aging
Specifies the amount of time (in seconds)
the MAC address remains in the Dynamic MAC Address
table before it times out, if no traffic from the source is
detected. The default value is 300 seconds.
Clear Table
If checked, clears the MAC address table.
Query
Port
Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
The specific port number.
LAG
The specific LAG number.
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID
Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key
Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Logging
The System Logs enable viewing device events in real
time, and recording the events for later usage. System
Logs record and manage events and report errors or
informational messages.
Admin > Logging
Event messages have a unique format, as per the
SYSLOG protocols recommended message format for
Page 59 / 81
Chapter 5
Advanced Configuration
53
8-Port 10/100/1000 Gigabit Switch with Webview
all error reporting. For example, Syslog and local device
reporting messages are assigned a severity code, and
include a message mnemonic, which identifies the source
application generating the message. It allows messages
to be filtered based on their urgency or relevancy. Each
message severity determines the set of event logging
devices that are sent per each event logging.
Logging
Indicates if device global logs for Cache, File,
and Server Logs are enabled. Console logs are enabled by
default.
Emergency
The system is not functioning.
Alert
The system needs immediate attention.
Critical
The system is in a critical state.
Error
A system error has occurred.
Warning
A system warning has occurred.
Notice
The system is functioning properly, but system
notice has occurred.
Informational
Provides device information.
Debug
Provides
detailed
information
about
the
log. If a Debug error occurs, contact Customer Tech
Support.
Admin > Port Mirroring
Admin > Port Mirroring
Port mirroring monitors and mirrors network traffic by
forwarding copies of incoming and outgoing packets
from one port to a monitoring port. Port mirroring can be
used as diagnostic tool and/or a debugging feature. Port
mirroring also enables switch performance monitoring.
Network administrators configure port mirroring by
selecting a specific port to copy all packets, and different
ports from which the packets are copied.
Source Port
Defines the port to which traffic is mirrored.
Type
Indicates the port mode configuration for port
mirroring. The possible field values are:
RxOnly
Defines the port mirroring on receiving ports.
This is the default value.
TxOnly
Defines the port mirroring on transmitting
ports.
Both
Defines the port mirroring on both receiving and
transmitting ports.
Target Port
Defines the port from which traffic is
mirrored.
Admin > Cable Test
The
Cable Test
screen shows you results from performance
tests on copper cables. The maximum cable length that
can be tested is 120 meters. Cables are tested when the
ports are in the down state, except for the Approximate
Cable Length test.
Admin > Cable Test
Port
This is the port to which the cable is connected.
Test Result
This is the test result. OK indicates that the
cable passed the test. No Cable means there is no cable
connected to the port. Open Cable means the cable is
connected on only one side. Short Cable indicates that a
short has occurred in the cable. Undefined indicates that
the test could not be properly performed.
Cable Fault Distance
This is the distance from the port at
which the cable error occurred.
Last Update
This is the last time the port was tested.
Test
Click the
Test
button to perform the test.
Page 60 / 81
Chapter 5
Advanced Configuration
54
8-Port 10/100/1000 Gigabit Switch with Webview
Cable Length
This is the approximate length of the cable.
The Cable Length test can be performed only when the
port is up and operating at 1Gbps.
Admin > Save Configuration
Admin > Save Configuration
Via TFTP
After you download a new image file, the device should
be rebooted. If you are downloading a new boot image,
please follow these steps:
Download the new boot code.
1.
WARNING:
While inputting the boot code,
refrain from reseting the device.
Download the new software image.
2.
Reset the device now.
3.
Upgrade
Select this option to upgrade the switch from a
file located on a TFTP server.
TFTP Server
The TFTP Server IP Address that contains
the source file to upgrade from.
Source File
Specifies the name of the upgrade file on
the TFTP server.
Backup
To back up the switch configuration via TFTP,
enter the TFTP server address.
TFTP Server
Specifies the TFTP Server IP Address to
which the configuration file will be saved.
Destination
File
Specifies
the
name
of
the
configuration file. The default is
StartupCfg.cfg
.
Via HTTP
This
HTTP Firmware Upgrade
screen is used for saving
configuration information using your web browser.
Upgrade
Select this option to upgrade the switch from a
file on the local hard drive.
Source File
Type in the name and path of the file or
click
Browse
to locate the upgrade file.
Backup
Proceed
The
Proceed
button is used to backup the
configuration to the local hard drive.
Admin > Firmware Upgrade
Admin > FIrmware Upgrade
The
Firmware Upgrade
screen contains the following
fields:
via TFTP
Defines the upgrade through a TFTP Server.
via HTTP
Allows you to upgrade the firmware using your
Web browser.
Upgrade
Defines the screen functionality as a Firmware
upgrade.
Backup
Defines the screen functionality as a Firmware
backup.
TFTP Server IP Address
Specifies the TFTP Server IP
Address from which files are downloaded.
Source File Name
Specifies the file to be downloaded.
Destination File name
Specifies the destination file
type to which to the file is downloaded. The possible field
values are:
Software Image
Downloads the image file.
Boot Code
Downloads the boot file.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top