Linksys SPA941 Administrator’s Guide
5
IMPORTANT
:
The string is case-sensitive and must
be entered exactly as it appears.
Failure to do so
will render the phone non-functional
.
9.
Click the Submit all changes button at the
bottom of the page (
).
10. Reboot the SPA941:
a.
Press the Setup (
) button.
b.
Use the directional buttons to scroll to
and select option
12 Reboot
.
c.
Press the
select
softkey to Confirm
System Reboot.
11. After the phone reboots, if an account has
already been created for the device in PRC
(Partner Resource Center), verify that the
configuration was successful by noting that the
4 station LEDs are green in color, and the
phone number displays on the LCD screen for
each available line (4).
If an account has not yet been created for the
device in PRC, the 4 station LEDs will remain
unlit and no phone number will be visible on
the LCD screen once the device reboots.
Once an account has been created in PRC for the
device, reboot the device.
The LEDs will then turn
green and the phone number will be visible on the
LCD screen.
NOTE
: After the provisioning is complete, the
Admin pages on the SPA941 web interface will not
be accessible.
The user can only access the
Info
,
System
, and
User
tabs from the SPA941’s Web
interface.
The device also cannot be restored to
its factory default settings from the LCD menus.
19216811.live