Given below is full router user manual of Linksys SPA-941 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 9
All Rights Reserved.
Copyright © 2006
The use, disclosure, modification, transfer, or transmittal of this work for any purpose,
in any form, or by any means, without the written permission of the copyright holder, is
strictly forbidden.
Disclaimer
The content of this manual is subject to change without notice and should not be
construed as a commitment by the manufacturer, distributor, or service provider. This
manual is furnished for informational use only and the manufacturer, distributor, or
service provider assumes no responsibility for any errors or inaccuracies that may
appear herein.
Page 3 / 9
Linksys SPA941 Administrator’s Guide
i
Table of Contents
1
WELCOME
...............................................................
2
O
VERVIEW
............................................................................
2
C
ONFIGURING THE
SPA941
WITH
N
ET
2P
HONE
’
S
P
ROVISIONING
S
ERVER
.........................................................
3
R
EMOVING
V
OICE
L
INE
S
ERVICE AND
R
ESTORING
F
ACTORY
D
EFAULTS
............................................................................
7
Page 4 / 9
Linksys SPA941 Administrator’s Guide
2
Welcome
Overview
Congratulations on purchasing the
Linksys SPA941
Internet Phone!
The Linksys SPA941 is a voice over Internet protocol
telephone. It is based on the SIP (Session Initiation)
Protocol, which is by far the most widely used protocol
by Internet telephone service providers (ITSP). The
SPA941 can be directly connected to the Internet to
access the services provided by the ITSPs.
Prior to deploying the Linksys SPA941 to your
customer, it must be configured to point to Net2Phone’s
provisioning server where it downloads its account
information. This manual will guide you through the
process of provisioning each Linksys SPA941 device
via the Linksys Web Interface.
Note that the phone will
not function unless Net2Phone’s provisioning server is
configured on the device.
Once an account has been
created for the device in the Partner Resource Center
(PRC), it can be rebooted and will download its unique
account information. At this point the phone is ready to
make and receive calls.
1
Page 5 / 9
Linksys SPA941 Administrator’s Guide
3
Configuring the SPA941 with
Net2Phone’s Provisioning Server
NOTE: The provisioning process can be
completed prior to provisioning the
device in the Partner Resource Center.
T
O PROVISION THE
L
INKSYS
SPA941:
Connect the phone to your network by following the
instructions in the Linksys SPA941 Quick Start Guide.
Once the phone is connected to the network…
1.
Access the phone’s setup menu by pressing
the setup (
) button.
2.
Using the navigation button, scroll down to
option
9 Network
, and press the
select
softkey.
3.
From the
Network
menu, locate the
CurrentIP
, and make note of the IP address.
4.
From a PC on the same network as the
SPA941, login to the SPA941 Web Interface
by opening your web browser and entering
http://ipaddress
(the IP address obtained in
the previous step).
5.
Click the
Admin Login
link.
19216811.live