Page 271 / 286
Scroll up to view Page 266 - 270
SPA400 Field Reference
Setup
SPA9000 Voice System Administration Guide
269
C
Setup tab>
Voicemail Users
Mailbox manage number
The phone number that the SPA9000 uses to access voice
mail
NOTE
This value appears in the
Proxy and Registration:
Mailbox Manage URL
field on the SPA9000 line interface
page.
Example
•
Mailbox manage number:
800
•
Mailbox Manage URL:
Default:
800
AA Language
The language that is used by the voice mail Auto Attendant:
English, German, Spanish, French, Dutch, Portuguese, Czech
Default:
English
Maximum length of a
voicemail message
The maximum number of seconds that can elapse before a
voice mail message is ended automatically
Default:
60
User Setting
Enable User
N
Enables the mailbox
NOTE:
Each mailbox can be assigned to a client station
that is managed by the SPA9000. Before a station can
deposit and access voicemail, the mail box ID must be
configured through the
Ext N
page.
User ID
The mailbox ID
Password
The password for the mailbox
Downloaded from
www.Manualslib.com
manuals search engine
Page 272 / 286
SPA400 Field Reference
Administration
SPA9000 Voice System Administration Guide
270
C
Administration
This section describes the fields on the following pages within the Administration
module:
•
“Management,” on page 270
•
“Factory Default,” on page 270
•
“USB Setting,” on page 271
•
“Firmware Upgrade,” on page 271
•
“Reboot,” on page 271
Administration tab>
Management
Administration tab>
Factory Default
Local Access
Gateway Username
The user name that is entered to log on to the SPA400 web
configuration utility (default =
Admin
)
Gateway Password
The password that is entered to log on to the SPA400 web
configuraton utility (default =
blank
)
Re-enter to Confirm
If you entered a new password, retype it in this field.
Restore Factory Defaults
Erases the current settings and resets the SPA400 to the
original factory default settings
Downloaded from
www.Manualslib.com
manuals search engine
Page 273 / 286
SPA400 Field Reference
Administration
SPA9000 Voice System Administration Guide
271
C
Administration tab>
USB Setting
Administration tab>
Firmware Upgrade
Administration tab>
Reboot
USB status
The status of the USB storage device: mount (file system
mounted and available) or unmount
I want to reset USB
(check box)
Reset (button)
Erases the voice mail messages that are stored on the USB
File Path
The file path to the firmware file that you want to install, as
selected by using the Browse button
Browse
Allows you to select a firmware file on your PC, and
populates the
File Path
field
Upgrade
Starts the Firmware upgrade, using the file that is specified
in the
File Path
field
Restart System
Restarts the SPA400
NOTE
All SPA400 connections will be broken.
Downloaded from
www.Manualslib.com
manuals search engine
Page 274 / 286
SPA400 Field Reference
Status
SPA9000 Voice System Administration Guide
272
C
Status
The Status page provides information. This page is read only. No changes can be
made.
Status tab>
Gateway
Gateway Information
Firmware Version
The firmware version that is installed on this device
Build Date
The date when the firmware was last updated
MAC Address
The MAC address of this device
Current Time
The current date and time
System Up Time
The length of time that the system has been operating, in
days, hours, and minutes
Internet Connection
IP Addres
The IP address of this device
IP Subnet Mask
The subnet mask for this subnet
Gateway IP Address
The IP address of the gateway device
Primary DNS
The primary DNS server
Secondary DNS
The secondary DNS server
SPA400 Status
USB status
The status of the USB storage device: mount (file system
mounted and available) or unmount
Voice mail status
The status of the voice mail service; OK indicates that voice
mail service is enabled
USB capacity status
The amount of storage space that is currently in use, and the
amount that is remaining, example: Used 5712KB, remaining
119960KB
SIP registration status
The status of the SIP registration; Registered indicates that
the SPA9000 is registered to the SPA400
Downloaded from
www.Manualslib.com
manuals search engine
Page 275 / 286
SPA400 Field Reference
Event Logs
SPA9000 Voice System Administration Guide
273
C
Event Logs
This section describes the fields on the SetLog Level page.
Event Logs tab>
Set Log Level
SPA400 logs significant events onto its internal buffer. For each log type, you can
choose to include Fatal Errors, Errors, Events, or All Information. Another option is
OFF, meaning that no information is collected for the selected log type.
FXO Line status
Hook Status
Line status (1-4)
The status of each line port:
•
On-Hook indicates that the FXO port is not in use.
•
Off-Hook indicates that a call is in progress.
Battery Level
Line (1-4)
The currently voltage on the line port, if the port is connected
to a PSTN line; for example, a connected line could show -51
V
Event Log Level
Telephony
Log level for telephony events
SIP
Log level for SIP events
DSP
Log level for DSP events
Dial plan
Log level for dial plan events
Voice mail
Log level for voice mail events
Others
Log level for all other events
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live