Page 66 / 103
Scroll up to view Page 61 - 65
57
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
2.
The first screen that appears is Figure 6-51. Choose whether the WAN2 (DMZ/Internet) port will be used as a
WAN (Internet) port or DMZ port. Select
Dual WAN
to use the port as a WAN port or select
DMZ
to use the port
as a DMZ port. Click
Next
to continue. Click
Exit
if you want to exit the wizard.
3.
The next screen is Figure 6-52. Your Internet Service Provider (ISP) may require a host and domain name. If
your ISP requires them, enter the
Host Name
in the field, and the
Domain Name
in the field. Click
Next
to
continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
4.
The next screen, Figure 6-53, is for selecting the WAN (or Internet) Connection Type for your WAN1 (Internet)
port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which type is used by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
Figure 6-51: Dual WAN or DMZ
Figure 6-52: Host and Domain Name
Figure 6-53: WAN Connection Type
Downloaded from
www.Manualslib.com
manuals search engine
Page 67 / 103
58
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
5.
The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN1
port.
If you chose Obtain an IP automatically, Figure 6-56 appears. Select
Use DNS Server provided by ISP
(default)
or
Use the Following DNS Server Addresses
, if you want to enter a specific IP. Click
Next
to
continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
If you chose Static IP, Figure 6-55 appears. Enter the
Static IP
,
Subnet Mask
, and
Default Gateway
provided
by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if
you want to exit the wizard.
If you chose PPPoE, Figure 6-56 appears. Enter the
User Name
and
Password
provided by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
Figure 6-54: Obtain an IP Automatically
Figure 6-55: Static IP
Figure 6-56: PPPoE
Downloaded from
www.Manualslib.com
manuals search engine
Page 68 / 103
59
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
6.
The next screen, Figure 6-57, is for selecting the WAN (or Internet) Connection Type for your WAN2 port when
using it as a WAN (or Internet) port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which
type is used by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen.
Click
Exit
if you want to exit the wizard.
7.
The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN2
port.
If you chose Obtain an IP automatically, Figure 6-58 appears. Select
Use DNS Server provided by ISP
(default)
or
Use the Following DNS Server Addresses
, if you want to enter a specific IP. Click
Next
to
continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
Figure 6-57: WAN Connection Type WAN2
Figure 6-58: Obtain an IP WAN2
Downloaded from
www.Manualslib.com
manuals search engine
Page 69 / 103
60
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
Figure 6-59: Static IP WAN2
Figure 6-60: PPPoE WAN2
Figure 6-61: Save Settings
If you chose Static IP, Figure 6-59 appears. Enter the
Static IP
,
Subnet Mask
, and
Default Gateway
provided
by your ISP. Click
Next
to continue.
Click
Previous
if you want to return to the previous screen. Click
Exit
if
you want to exit the wizard.
If you chose PPPoE, Figure 6-60 appears. Enter the
User Name
and
Password
provided by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
8.
The final screen that appears is Figure 6-61. If you don’t need to make any changes click
Save Settings.
Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
Downloaded from
www.Manualslib.com
manuals search engine
Page 70 / 103
61
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
Access Rule Setup
1.
Click the
Launch Now
button to run the Access Rule Wizard to help you easily set up the Firewall security
policy for the Router.
2.
The first screen to appear is Figure 6-62. This screen explains the Access Rules. Click
Next
to continue. Click
Exit
if you want to exit the wizard.
3.
The next screen to appear is shown in Figure 6-63. Select
Allow
or
Deny
for the action. Click
Next
to
continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
4.
The next screen to appear is shown in Figure 6-64. Select the service from the drop-down menu that will be
allowed or denied from the Service menu. Click
Next
to continue. Click
Previous
if you want to return to the
previous screen. Click
Exit
if you want to exit the wizard.
Figure 6-62: Access Rules Policy
Figure 6-63: Select the Action
Figure 6-64: Select the Service
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live