Page 61 / 86
Scroll up to view Page 56 - 60
Schedule Enable
Selected if you want to Enable the Scheduler press
“
Edit”
To edit the schedule rule, press “
Delete”
To delete the schedule rule and the rule #of the rules behind the deleted one will decrease one
automatically.
Schedule Rule can be applied to Virtual server and Packet Filter.
Downloaded from
www.Manualslib.com
manuals search engine
Page 62 / 86
Qos Rule
Local IP:
Please input Client IP, Example: 192.168.12.33.
Remote Priority:
Please input Global IP and port, Example: 168.96.2.3 and port 21
54
Downloaded from
www.Manualslib.com
manuals search engine
Page 63 / 86
Toolbox
System Log
Firmware Upgrade
You can upgrade firmware by clicking
Firmware Upgrade
button.
Backup Setting
You can backup your settings by clicking the
Backup Setting
button and save it as a bin file. Once
you want to restore these settings, please click
Firmware Upgrade
button and use the bin file you
Downloaded from
www.Manualslib.com
manuals search engine
Page 64 / 86
saved.
Reset to default
You can also reset this product to factory default by clicking the
Reset to default
button.
Reboot
You can also reboot this product by clicking the
Reboot
button.
Miscellaneous Items
MAC Address for Wake-on-LAN
Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to
enjoy this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC
address of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to
send the wake-up frame to the target device immediately.
Domain Name or IP Address for Test
Allow you to configure an IP, and ping the device. You can ping a specific IP to test whether it is alive.
56
Downloaded from
www.Manualslib.com
manuals search engine
Page 65 / 86
Appendix A
802.1x Setting
Figure 1: Testing Environment (Use Windows 2000 Radius Server)
Equipment Details
PC1:
Microsoft Windows XP Professional without Service Pack 1 and LevelOne Wireless PCI Card
PC2:
Microsoft Windows XP Professional with Service Pack 1a or latter and LevelOne Wireless PCI
Card.
Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664.
Note. Windows 2000 RADIUS server only supports PEAP after upgrade to
service pack 3 and
HotFix Q313664
(You can get more information from
)
DUT Configuration:
1. Enable DHCP server.
2. WAN setting: static IP address.
3. LAN IP address: 192.168.123.254/24.
4. Set RADIUS server IP.
5. Set RADIUS server shared key.
6. Configure WEP key and 802.1X setting.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live