Page 56 / 82
Scroll up to view Page 51 - 55
56
4.7.3 Dynamic DNS
To host your server on a changing IP address, you have to use dynamic domain name service (DDNS).
So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map
the name of your host to your current IP address, which changes each time you connect your Internet
service provider.
Before you enable
Dynamic DNS
, you need to register an account on one of these Dynamic DNS
servers that we list in
provider
field.
To enable
Dynamic DNS
click the check box next to
Enable
in the
DDNS
field.
Next you can enter the appropriate information about your Dynamic DNS Server.
You have to define:
Provider
Host Name
Username/E-mail
Password/Key
You will get this information when you register an account on a Dynamic DNS server.
Page 57 / 82
57
Example:
After Dynamic DNS setting is configured, click the save button.
The new settings will be effective after reboot.
Page 58 / 82
58
4.7.4 SNMP Setting
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the
capability to remotely manage a computer network by polling and setting terminal values and
monitoring network events.
Enable SNMP
You must check either Local or Remote or both to enable SNMP function. If Local is checked, this
device will response request from LAN. If Remote is checked, this device will response request from
WAN.
Get Community
Setting the community of GetRequest your device will response.
Set Community
Setting the community of SetRequest your device will accept.
WAN Access IP Address
WBR-5400 will only respond the SNMP packet to the device with the entered IP.
If left it blank, WBR-5400 will not respond SNMP packet from WAN port.
Page 59 / 82
59
Example:
1. This device will response to SNMP client which’s
get community
is set as “public”
2. This device will response to SNMP client which’s
set community
is set as “private”
Page 60 / 82
60
4.7.5 Routing Table
Routing Tables
allow you to determine which physical interface address to use for outgoing IP data
grams. If you have more than one routers and subnets, you will need to enable routing table to allow
packets to find proper routing path and allow different subnets to communicate with each other.
Routing Table settings are settings used to setup the functions of static.
Static Routing
: For static routing, you can specify up to 8 routing rules. You can enter the destination
IP address, subnet mask, gateway, hop for each routing rule, and then enable or disable the rule by
checking or unchecking the Enable checkbox.
19216811.live