1. Home
    2. /
  2. Manuals
    3. /
  3. Legrand
    4. /
  4. On-Q DA1004
    5. /
  5. 4
Page 16 / 30 Scroll up to view Page 11 - 15
13
301 Fulling Mill Road, Suite G
©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA
17057
www.onqlegrand.com
(800)-321-2343
The Firmware Upgrade screen (see
Figure 15
) allows you to upgrade the On-Q Router’s system
firmware. To upgrade the firmware of your router, you need to download the firmware file from the
On-Q/Legrand website to your local hard disk, and enter that file name and path in the
appropriate field on this page. You can also use the Browse button to find the firmware file on
your PC.
The Configuration Tools screen (see
Figure 16
) allows you to save (
Backup
) the router’s current
configuration setting. Saving the configuration settings provides an added protection and
convenience, if problems occur with the router and you have to reset to factory default. When you
save the configuration setting (
Backup
) you can re-load the saved configuration into the router
through the
Restore
selection.
If extreme problems occur, you can use the
Restore to Factory
Defaults
selection, this will set all configurations to its original default settings (e.g. when you first
purchased the router). You also can
Restart
the router’s system if any problems exist.
Figure 15
Figure 16
Page 17 / 30
14
301 Fulling Mill Road, Suite G
©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA
17057
www.onqlegrand.com
(800)-321-2343
The System Log (see
Figure 17
) records various types of activity on the On-Q Router/Switch.
This data is useful for troubleshooting, but enabling all logs will generate a large amount of data
and adversely affect performance. Since only a limited amount of log data can be stored in the
Router, log data can also be configured to be emailed to your PC or sent to a Syslog Server.
B. WAN Configuration
Use the WAN selection (see
Figure 18
) if you have already configured the router using the
Wizard and you would like to change your Internet connection type. Notice that the Connected
Type selection portion of the screen is followed with the detail area for that connected type (Static
IP Address shown in this example). The Connected Types include,
Dynamic IP Address
,
Static
IP
Address, PPPoE
,
PPTP and
L2TP.
Figure 17
Page 18 / 30
15
301 Fulling Mill Road, Suite G
©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA
17057
www.onqlegrand.com
(800)-321-2343
Select DNS (see
Figure 19
) to configure a Domain Name System Server if required. A Domain
Name System (DNS) server is like an index of IP addresses and Web addresses. If you type a
Web address into your browser, such as www.router.com, a DNS server will find that name in its
index and the matching IP address. .
Figure 18
Figure 19
Page 19 / 30
16
301 Fulling Mill Road, Suite G
©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA
17057
www.onqlegrand.com
(800)-321-2343
C. LAN Configuration
The LAN selection (see
Figure 20
) allows you to specify a private IP address for your router’s
LAN ports as well as a subnet mask for your LAN segment.
The LAN selection also allows you to view your DHCP client list (see
Figure 21
) and also assign
static clients as required.
Figure 20
Figure 21
Page 20 / 30
17
301 Fulling Mill Road, Suite G
©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA
17057
www.onqlegrand.com
(800)-321-2343
D. NAT Configuration
The NAT (Network Address Translation) selection allows multiple users at your local site to
access the Internet through a single Public IP Address or multiple Public IP Addresses. NAT
provides Firewall protection from hacker attacks and has the flexibility to allow you to map Private
IP Addresses to Public IP Addresses for key services such as Websites and FTP. To meet
various field applications, the On-Q Router/Switch NAT function can be disabled allowing it to
function as a regular router. If NAT is disabled, all LAN side workstations must have valid IP
addresses for Internet access. If the On-Q Router/Switch is strictly used for a routing application,
not for Internet access, then and only then should the NAT function be disabled.
Use the Virtual Server function (see
Figure 22
) when you want different servers/clients in your
LAN to handle different service/Internet application types (e.g. email, FTP, Web server etc.) from
the Internet. Computers use numbers called port numbers to recognize a particular
service/Internet application type. The Virtual Server allows you to re-direct a particular service
port number (from the Internet/WAN Port) to a particular LAN private IP address and its service
port number.
Figure 22

Rate

3.5 / 5 based on 2 votes.

Popular Legrand Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top