Page 31 / 56
Scroll up to view Page 26 - 30
KEEBOX Wireless 11n Router
Tx Power
Use the drop-down list to select the percentage of Tx Power.
Short Guard Interval
Check this box to reduce the guard interval time therefore increasing the data
capacity. However, it’s less reliable and may create higher data loss.
Click
Apply
to save the changes.
Security
This window allows you to configure the wireless security settings.
Fields
Description
Broadcast SSID
Use the drop-down list to broadcasting the SSID or not.
WMM
Use the drop-down list to enable or disable Wi-Fi Multimedia.
Encryption
Use the drop-down list to select the wireless security mode. The available choices are
WEP
,
WEA Only
,
WPA2 Only
and
WPA/WPA2 Mixed
.
WEP
Select
WEP
from the
Encryption
drop-down list to see the following window.
28
Page 32 / 56
KEEBOX Wireless 11n Router
Fields
Description
Authentication type
Click the radio buttons to select
Open System
or
Shared Key
. Shared key provide
greater security.
Key Length
Select either
64Bit
or
128Bit
encryption from the drop-down list.
Key type
Select
ASCII (5 characters)
or
ASCII (10 characters)
from the drop-down list.
Default key
Select the default key for the wireless from the drop-down list.
Encryption Key 1 to
4
Enter WEP key here. Make sure you enter this key exactly on all your wireless
devices.
Click
Apply
to save the changes.
WPA Only / WPA2 Only / WPA/WPA2 Mixed
Select other types of wireless security modes from the
Encryption
drop-down list to see the following
window.
29
Page 33 / 56
KEEBOX Wireless 11n Router
Fields
Description
PSK / EAP type
Use the radio button to select
PSK
or
EAP
type.
WPA type
Use the radio button to select
TKIP
,
AES
or
Mixed
type.
RADIUS Server IP
address
Enter the IP address of a RADIUS server.
RADIUS Server
port
Enter the port you are using with the RADIUS server.
RADIUS Server
password
Enter the passport of the RADIUS server.
Click
Apply
to save the changes.
WPS
Wi-Fi Protected Setup (WPS) provides an easier way to allow your wireless clients to connection to your
network, using PIN or Push Button (PBC) method.
30
Page 34 / 56
KEEBOX Wireless 11n Router
The following fields can be configured:
Fields
Description
WPS
Tick the
Enable
check box to enable the Wi-Fi protected setup function. Deselect to
disable the function.
Passphrase Key
Enter a key for connecting the wireless network.
WPS via Push
button
This virtual
Start to Process
button has the same function as the physical WPS
button on the hardware device. Click to start WPS connection.
WPS via PIN
Enter the password for WPS connection and click
Start to Process
to start WPS
connection.
Click
Apply
to save the changes.
Client List
This window displays all the clients of wireless connection.
31
Page 35 / 56
KEEBOX Wireless 11n Router
Click the
Refresh
button to update the status.
Firewall
This chapter provides more choices for firewall setup.
32
19216811.live