Page 46 / 56
Scroll up to view Page 41 - 45
KEEBOX Wireless 11n Router
Routing
This window allows you to define static routes to defined destinations.
Fields
Description
Static Routing
Tick this checkbox to enable or disable static routes to defined destinations.
Interface
Use the drop-down menu to choose the Interface that the IP packet must use to transit
out of the Router.
Destination
The IP address of the packets that will take this route.
Subnet Mask
Enter the subnet mask of the IP address
Gateway
Enter the next hop to be taken if this route is used.
Click
Add
to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under
Select
, and click
Delete Selected
. To remove all entries, click
Delete All
. Click
Reset
to clear all the information that has not been saved.
Click
Apply
to save the changes.
43
Page 47 / 56
KEEBOX Wireless 11n Router
Tools
Password
This window allows you to change the password and default IP address of the Router.
Fields
Description
Old Password
Enter the existing password when log in the Router.
New Password
Enter a new login password.
Repeat New
Password
Retype the new login password.
Host Address
Enter the Internet IP address of the computer that has access to the Router.
Port
Enter a port number to access the Router.
Enable
Tick the check box to enable the remote management function.
Click
Apply
to save the changes.
44
Page 48 / 56
KEEBOX Wireless 11n Router
Time
This window allows you to configure time and date of the Router.
Fields
Description
Time Setup
Use the drop-down list to synchronize the Router’s time with your computer or an NTP
server.
PC Date and
Time
This field appears when selecting
Synchronize with PC
in the
Time Setup
drop-down
list. This field displays the current PC time.
NTP Time
Server
This field appears when selecting
Synchronize with the NTP Server
in the
Time
Setup
drop-down list. Enter the IP address of the NTP server.
Time Zone
Use the drop-down list to select your time zone.
Daylight Saving
Tick the
Enable
check box to enable daylight saving.
Click
Apply
to save the changes.
45
Page 49 / 56
KEEBOX Wireless 11n Router
DDNS
The Router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a
dynamic public IP address to be associated with a static host name in any of the many domains, allowing
access to a specified host from various locations on the Internet. This is enabled to allow remote access
to a host by clicking a hyperlinked URL in the form
hostname.dyndns.org
, Many ISPs assign public IP
addresses using DHCP, this can make it difficult to locate a specific host on the LAN using standard DNS.
If for example you are running a public web server or VPN server on your LAN, this ensures that the host
can be located from the Internet if the public IP address changes. DDNS requires that an account be
setup with one of the supported DDNS providers.
Fields
Description
Dynamic DNS
Click the
Enable
radio button to enable supporting for DDNS.
Server Address
Select one of the DDNS registration organizations form those listed in the pull-down
menu.
Host Name
Enter the host name of the DDNS server.
Username
Enter the username given to you by your DDNS server.
Password
Enter the password or key given to you by your DDNS server.
Click
Apply
to save the changes.
46
Page 50 / 56
KEEBOX Wireless 11n Router
Diagnostic
This window is used to test connectivity of the Router.
Fields
Description
Address to Ping
Enter the IP Address that you wish to Ping, and click
Start
.
Ping Result
The field displays the result after pinging.
47
19216811.live