Page 16 / 56
Scroll up to view Page 11 - 15
iB-LR6111A
ADSL2+ Router User Guide
11
Step 3:
You will see Figure 3-8 as follow, please wait a moment.
Figure 3-8
Step 4:
After that, you will see Figure 3-9. Click
Finish
to complete the installation.
Figure 3-9
)
Note:
1)
All of the above settings are under windows XP.
2)
If you want to pull out the USB device you must disconnect the network of USB first.
3)
In the Vista operating system, maybe the “Unknown Device” screen will pop up when you
insert the USB cable of the Router to a computer, please just unplug the USB cable and try
again.
3.3
Login
Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:
Start your web browser and type the private IP address of the Router in the URL field:
192.168.1.1
.
Page 17 / 56
iB-LR6111A
ADSL2+ Router User Guide
12
After that, you will see the screen shown below, enter the default User Name
admin
and the
default Password
admin
,
and then click
OK
to access to the
Quick Start
screen. You can follow
the steps below to complete the Quick Start.
Figure 3-10
Step 1:
Select the
Quick Start
tab, then click
RUN WIZARD
, and you will see Figure 3-11. Click
the
NEXT
button.
Figure 3-11
Step 2:
Configure the time for the Router, and then click the
NEXT
button.
Figure 3-12
Step 3:
Select the connection type to connect to the ISP (We select
PPPoE/PPPoA
mode for
example here), and then click the
NEXT
button.
Page 18 / 56
iB-LR6111A
ADSL2+ Router User Guide
13
Figure 3-13
Step 4:
Configure the following options provided by your ISP:
Username
,
Password
,
VPI
,
VCI
and
Connection Type
. Then click
NEXT
.
Figure 3-14
Step 5:
Click
NEXT
to finish the Quick Start.
Figure 3-15
Page 19 / 56
iB-LR6111A
ADSL2+ Router User Guide
14
Chapter 4.
Software Configuration
This User Guide recommends using the “Quick Installation Guide” for first-time installation. For
advanced users, if you want to know more about this device and make use of its functions
adequately, maybe you will get help from this chapter to configure the advanced settings through
the Web-based Utility.
After your successful login, you can configure and manage the device. There are main menus on
the top of the Web-based Utility, submenus will be available after you click one of the main menus.
On the center of the Web-based Utility, there are the detailed configurations or status information.
To apply any settings you have altered on the page, please click the
SAVE
button.
4.1
Status
Choose “
Status
”, you can see the next submenus:
Device Info
,
System Log
and
Statistics
.
Click any of them, and you will be able to configure the corresponding function.
Figure 4-1
4.1.1 Device Info
Choose “
Status
→
Device Info
” menu, and you will be able to view the device information,
including LAN, WAN and ADSL. The information will vary depending on the settings of the Router
configured on the Netwok Setup screen.
Figure 4-2
Page 20 / 56
iB-LR6111A
ADSL2+ Router User Guide
15
4.1.2 System Log
Choose “
Status
→
System Log
” menu, and you will be able to query the logs of the Router.
Figure 4-3
The Router can keep logs of all traffic. You can query the logs to find what happened to the
Router.
Click the
CLEAR LOG
button to clear the logs.
Click the
SAVE LOG
button to save the logs.
4.1.3 Statistics
Choose “
Status
→
Statistics
” menu, and you will be able to view the network traffic over Ethernet,
and ADSL.
19216811.live