iB-LR6111A

ADSL2+ Router User Guide

1

Package Contents

The following items should be found in your package.

¾

One iB-LR6111A ADSL2+ Router

¾

One Power Adapter for iB-LR6111A ADSL2+ Router

¾

Quick Installation Guide

¾

One RJ45 cable

¾

One USB cable

¾

Two RJ11 cables

¾

One ADSL splitter

¾

One Resource CD, including

z

This User Guide

z

USB Driver

z

Other Helpful Information

)

Note:

If any of the listed contents is damaged or missing, please contact the retailer from whom you

purchased the product for assistance.

iB-LR6111A

ADSL2+ Router User Guide

2

Chapter 1. Introduction

Thank you for choosing the

iB-LR6111A ADSL2+ Router.

1.1

Product Overview

The device is designed to provide a simple and cost-effective ADSL Internet connection for a

private Ethernet network.

iBall Baton iB-LR6111A connects to an Ethernet LAN or computers via standard Ethernet ports.

The ADSL connection is made using ordinary telephone line with standard connectors. Multiple

workstations can be networked and connected to the Internet using a single Wide Area Network

(WAN) interface and single global IP address. The advanced security enhancements,

IP

/

MAC

Filter

,

Application Filter

and

URL Filter

can help to protect your network from potentially

devastating intrusions by malicious agents from the outside of your network.

Quick Start

of the Web-based Utility is supplied and friendly help messages are provided for the

configuration. Network and Router management is done through the Web-based Utility which can

be accessed through local Ethernet using any web browser.

ADSL

iB-LR6111A supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI specifications.

In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports dual latency

ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.

1.2

Main Features

¾

Complies with IEEE 802.3 & IEEE 802.3u standards.

¾

Complies with ADSL protocols (ADSL / ADSL2 / ADSL2+).

¾

One 10/100M RJ45 LAN port (Auto MDI/MDIX) & one USB Port.

¾

One RJ11 (WAN) Port.

¾

Supports Multiple PVC (Permanent Virtual Circuit).

¾

Supports IPTV Ready feature.

¾

Supports downstream data rates up to 24Mbps, upstream data rates up to 3.5Mbps (With

Annex M enabled).

¾

Triple Active Firewall: SPI, NAT & Packet filtering.

¾

Supports firewall filtering as IP/MAC filter, Application filter and URL filter.

¾

Supports Virtual Server, DMZ host and IP Address Mapping.

¾

Supports Dynamic DNS, UPnP and Static Routing.

iB-LR6111A

ADSL2+ Router User Guide

3

¾

Built-in DHCP server.

¾

Supports long transfers, the max line length can reach to 6.5Km.

¾

Supports remote configuration and management through SNMP.

¾

Real-time Configuration and device monitoring.

¾

Supports system log and flow Statistics.

¾

Supports firmware upgrade and Web management.

1.3

Conventions

The Router or device mentioned in this User Guide stands for iB-LR6111A or iBall Baton Adsl2+

Router without any explanations.

Parameters provided in the pictures are just references for setting up the product, which may

differ from the actual situation.

iB-LR6111A

ADSL2+ Router User Guide

Chapter 2.

Hardware Installation

2.1

The Front Panel

Figure 2-1

The LEDs are located on the front panel. They indicate the device’s working status. For details,

please refer to LED Explanation.

LED Explanation:

LED

Status

Indication

On

There is a successful connection on USB port but no activity.

Flash

Data is being transferred over the USB connection.

USB

Off

There is no connection on USB port or the connection is

abnormal.

On

There is a successful connection on LAN port but no activity

Flash

Data is being transferred over the LAN connection

LAN

Off

There is no connection on LAN port or the connection is

abnormal

On

The LINE port is linked up

Flash

The ADSL2+ Router is training

ADSL

Off

The LINE port is linked down

On

A successful PPP connection has been established

Flash

Data is being transferred over the Internet

Internet

Off

There is no successful PPP connection or the Router works

on Bridge mode

On

Power is OK

Power

Off

Power is failed

4

iB-LR6111A

ADSL2+ Router User Guide

5

2.2

The Back Panel

Figure 2-2

¾

ON/OFF: The switch for the power.

¾

POWER: The Power plug is where you will connect the power adapter.

¾

LAN: Through the port, you can connect the Router to your PC or the other Ethernet network

devices.

¾

RESET: There are two ways to reset the Router's factory defaults.

Method one:

With the Router powered on, use a pin to press and hold the Reset button for at

least 5 seconds. And the Router will reboot to its factory default settings.

Method two:

Restore the default setting from “Maintenance-SysRestart” of the Router's

Web-based Utility

¾

USB: Connect with your computer’s USB interface

¾

LINE: Through the port, you can connect the Router with the telephone.

2.3

Installation Environment

¾

The Product should not be located where it will be exposed to moisture or excessive heat.

¾

Place the Router in a location where it can be connected to the various devices as well as to

a power source.

¾

Make sure the cables and power cord are placed safely out of the way so they do not create a

tripping hazard.

¾

The Router can be placed on a shelf or desktop.

2.4

Hardware installation procedures

The procedure to install the Router can be described in the following steps:

First Step

: Connect the Modem port of Splitter with the LINE port of the Router by telephone line.

Second Step

: Connect category 5 cable with RJ45 jacks to Router’s LAN port and your

computer’s NIC. Or connect USB cable to ADSL2+ Router’s USB port and your computer’s USB

interface.

(When you connect your PC to the Router through the USB port, please install the USB

driver first. For the detailed operation please refer to “3.2 USB Configuration” in User Guide.)

Third Step

: Plug one end of the provided Power Adapter into the Power jack on the Router and

the other end to a standard electrical outlet.

Last Step

: Check the line connection to see if everything is ready. Power on finally.