HooToo HT-ND006 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 43 Scroll up to view Page 1 - 5

3

1.4

LED Indicator

The LED indicator displays information about the device status.

1.5

Physical Interface

Port/Button

Description

WAN

Internet port connecting to a DSL/Cable modem or

ISP directly.

LAN 1-2

For connection to a computer or router.

RESET/WPS

Pressing this button for 7 seconds restores the device

to factory default settings.

Press WPS button for 2 seconds and release; WPS

LEDs

Names

Status

Indications

System LED

Blinking

The router is booting or upgrading.

Solid

The router has booted.

Off

Power is off or the router has not

booted.

WiFi LED

Blinking

The wireless function has been

enabled.

Off

The wireless function has been

disabled.

Internet

LED

Solid

Connected to the internet but

inaccessible.

Blinking

Connected to the internet and

accessible.

Off

Not connected to the internet.

Ethernet

LED

Off

No device is connected to the

Ethernet (1/2) port.

Blinking

Device(s) connected to the Ethernet

(1/2) port(s).

WPS LED

Blinking

WPS button on the router is pressed

and the router is trying to connect a

wireless device to its network via WPS.

Solid

The connection via WPS is successful.

Off

The connection via WPS fails.

Page 7 / 43

4

function will start working for 2 minutes.

PWR

Power Adapter.

Don’t use a different power adapter than the

included one.

2.

Connection

2.1

Hardware Connection

Please follow the following steps to set up the router:

1.

Please connect your modem to the router's WAN port via the

Ethernet cable.

2.

Use another cable to connect your computer’s Ethernet port with

the router LAN port.

3.

Connect the router power adapter.

Note:

Before connecting, please make sure that you can surf the

internet on your computer.

Page 8 / 43

5

2.2

PC TCP/IP Settings

Prior to logging into the router, please make sure your computer is set to

"Obtain an IP address automatically" and "Obtain DNS server address

automatically" (from the device).

1.

Click

Start,

then select

Control Panel.

2.

Click

Network and Internet.

Page 9 / 43

6

3.

Click

Network and Sharing Center

.

4.

Click

Change Adapter Settings

.

5.

Click

Local

Area Connection

and select

Properties

.

Page 10 / 43

7

6.

Select

Internet Protocol Version 4 (TCP/IPv4)

and click

Properties

.

7.

Select

Obtain an IP address automatically

and click

OK.

8.

Click

OK

on the

Local Area Connection Properties

window

to save

your settings.

Rate

Popular HooToo Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share