1. Home
    2. /
  2. Manuals
    3. /
  3. Hitron Technologies
    4. /
  4. CGN2-ROG
    5. /
  5. 5
Page 21 / 113 Scroll up to view Page 16 - 20
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
21
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
21
HITRON CGN2 USER’S GUIDE
When you turn on the CGN2, the LEDs light up in the following order:
Power
US
DS
Status
The
ETH 1~4
LEDs light up as soon as there is activity on the relevant port, and
the
WIRELESS
LED lights up once the wireless network is ready.
1.4
IP ADDRESS SETUP
Before you log into the CGN2’s GUI, your computer’s IP address must be in the same
subnet as the CGN2. This allows your computer to communicate with the CGN2.
NOTE:
See IP Addresses and Subnets on page 27 for background information.
The CGN2 has a built-in DHCP server that, when active, assigns IP addresses to
computers on the LAN. When the DHCP server is active, you can get an IP address
automatically. The DHCP server is active by default.
If your computer is configured to get an IP address automatically, or if you are not
sure, try to log in to the CGN2 (see
Logging into the CGN2
on page
23
).
If the login screen displays, your computer is already configured correctly.
If the login screen does not display, either the CGN2’s DHCP server is not active
or your computer is not configured correctly. Follow the procedure in
Manual IP
Address Setup
on page
22
and set your computer to get an IP address
automatically. Try to log in again. If you cannot log in, follow the manual IP
address setup procedure again, and set a specific IP address as shown. Try to
log in again.
NOTE:
If you still cannot see the login screen, your CGN2’s IP settings may have
been changed from their defaults. If you do not know the CGN2’s new
address, you should return it to its factory defaults. See Resetting the CGN2
on page 25. Bear in mind that ALL user-configured settings are lost.
Page 22 / 113
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
22
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
22
HITRON CGN2 USER’S GUIDE
1.4.1
MANUAL IP ADDRESS SETUP
By default, your CGN2’s local IP address is
192.168.0.1
. If your CGN2 is using the
default IP address, you should set your computer’s IP address to be between
192.168.0.2
and
192.168.0.254
.
NOTE:
If your CGN2 DHCP server is active, set your computer to get an IP address
automatically in step 5. The CGN2 assigns an IP address to your computer.
The DHCP server is active by default.
Take the following steps to manually set up your computer’s IP address to connect to
the CGN2:
NOTE:
This example uses Windows XP; the procedure for your operating system
may be different.
1
Click
Start
, then click
Control Panel
.
2
In the window that displays, double-click
Network Connections
.
3
Right-click your network connection (usually
Local Area Connection
) and click
Properties
.
4
In the
General
tab’s
This connection uses the following items
list, scroll
down and select
Internet Protocol (TCP/IP)
. Click
Properties
.
5
You can get an IP address automatically, or specify one manually:
If your CGN2’s DHCP server is active, select
Get an IP address
automatically
.
If your CGN2’s DHCP server is active, select
Use the following IP address
.
In the
IP address
field, enter a value between
192.168.0.2
and
192.168.0.254
(default). In the
Subnet mask
field, enter
255.255.255.0
(default).
NOTE:
If your CGN2 is not using the default IP address, enter an IP address and
subnet mask that places your computer in the same subnet as the CGN2.
6
Click
OK
. The
Internet Protocol (TCP/IP)
window closes. In the
Local Area
Connection Properties
window, click
OK
.
Page 23 / 113
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
23
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
23
HITRON CGN2 USER’S GUIDE
Your computer now obtains an IP address from the CGN2, or uses the IP address
that you specified, and can communicate with the CGN2.
1.5
LOGGING INTO THE CGN2
Take the following steps to log into the CGN2’s GUI.
NOTE:
You can log into the CGN2’s GUI via the wireless interface. However, it is
strongly recommended that you configure the CGN2 via a wired connection
on the LAN.
1
Open a browser window.
2
Enter the CGN2’s IP address (default
192.168.0.1
) in the URL bar. The
Login
screen displays.
Figure 5:
Login
3
Enter the
Username
and
Password
. The default login username is
cusadmin
,
and the default password is
password
.
NOTE:
The Username and Password are case-sensitive; “password” is not the same
as “Password”.
4
Click
Login
. The
System Info
screen displays (see
The System Info Screen
on
page
33
).
Page 24 / 113
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
24
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
24
HITRON CGN2 USER’S GUIDE
1.6
GUI OVERVIEW
This section describes the CGN2’s GUI.
Figure 6:
GUI Overview
Each item in the
Primary Navigation Bar
has its own chapter in this User's Guide;
items in the
Secondary Navigation Bar
have their own section within a chapter.
Table 4:
GUI Overview
Primary
Navigation Bar
Use this section to move from one part of the GUI to another.
Secondary
Navigation Bar
Use this section to move from one related screen to another.
Main Window
Use this section to read information about your CGN2’s
configuration, and make configuration changes.
Page 25 / 113
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
25
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
25
HITRON CGN2 USER’S GUIDE
1.7
RESETTING THE CGN2
When you reset the CGN2 to its factory defaults, all user-configured settings are lost,
and the CGN2 is returned to its initial configuration state.
There are two ways to reset the CGN2:
Press the
RESET
button on the CGN2, and hold it in for ten seconds or longer.
Click
WAN/LAN
>
Backup
. In the screen that displays, click the
Factory Reset
button.
The CGN2 turns off and on again, using its factory default settings.
NOTE:
Depending on your CGN2’s previous configuration, you may need to re-
configure your computer’s IP settings; see IP Address Setup on page 21.

Rate

4.5 / 5 based on 2 votes.

Popular Hitron Technologies Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top