1. Home
    2. /
  2. Manuals
    3. /
  3. Hiro
    4. /
  4. H50188
    5. /
  5. 14
Page 66 / 71 Scroll up to view Page 61 - 65
64
WLAN ADSL2+ Router
Step 4.
You may edit or delete the port mappings or click Add to manually add port mappings.
Step 5.
Select Show icon in notification area when connected option and click OK. An icon
displays in the system tray
Step 6.
Double-click on the icon to display your current Internet connection status.
Page 67 / 71
65
WLAN ADSL2+ Router
10.0 Web Configuration Easy Access
With UPnP, you can access the web-based configuration on WLAN ADSL2+ Router without
finding out the IP address of WLAN ADSL2+ Router first. This comes helpful if you do not know
the IP address of WLAN ADSL2+ Router.
Follow the steps below to access the web configuration.
Step 1.
Click Start and then Control Panel.
Step 2.
Double-click Network Connections.
Step 3.
Select My Network Places under Other Places.
Page 68 / 71
66
WLAN ADSL2+ Router
Step 4.
An icon with the description for each UPnP-enabled device displays under Local
Network.
Step 5.
Right-click on the icon for your WLAN ADSL2+ Router and select Invoke. The web
configuration login screen displays.
Step 6.
Right-click on the icon for your WLAN ADSL2+ Router and select Properties. A
properties window displays with basic information about WLAN ADSL2+ Router.
Page 69 / 71
67
WLAN ADSL2+ Router
11.0 Troubleshooting
A.1 Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
A.1.1 Power LED
The PWR LED on the front panel does not light up.
STEPS
CORRECTIVE ACTION
1
Make sure that WLAN ADSL2+ Router’s power adaptor is connected to WLAN
ADSL2+ Router and plugged in to an appropriate power source. Use only the
supplied power adaptor.
2
Check that WLAN ADSL2+ Router and the power source are both turned on and
WLAN ADSL2+ Router is receiving sufficient power.
3
Turn the WLAN ADSL2+ Router off and on.
4
If the error persists, you may have a hardware problem. In this case, you should
contact your vendor.
A.1.2 LAN LED
The LAN LED on the front panel does not light up.
STEPS
CORRECTIVE ACTION
1
Check the Ethernet cable connections between your WLAN ADSL2+ Router and the
computer or hub.
2
Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact your local distributor for assistance.
A.1.3 DSL LED ( ACT & LINK)
The DSL LED on the front panel does not light up.
STEPS
CORRECTIVE ACTION
1
Check the telephone wire and connections between ADSL2+ Router DSL port and
the wall jack.
2
Make sure that the telephone company has checked your phone line and set it up for
DSL service.
3
Reset your ADSL line to reinitialize your link to the DSLAM.
4
If these steps fail to correct the problem, contact your local distributor for assistance.
A.2 Telnet
I cannot telnet into WLAN ADSL2+ Router.
STEPS
CORRECTIVE ACTION
1
Check the LAN port and the other Ethernet connections.
2
Make sure you are using the correct IP address of WLAN ADSL2+ Router. Check
the IP address of WLAN ADSL2+ Router.
3
Ping WLAN ADSL2+ Router from your computer.
If you cannot ping WLAN
ADSL2+ Router, check the IP addresses of WLAN ADSL2+ Router and your
computer. Make sure your computer is set to get a dynamic IP address; or if you
want to use a static IP address on your computer, make sure that it is on the same
subnet as WLAN ADSL2+ Router.
4
Make sure you entered the correct password. The default password is “1234”.
5
If these steps fail to correct the problem, contact the distributor.
Page 70 / 71
68
WLAN ADSL2+ Router
A.3 Web Configuration
I cannot access the web configuration.
STEPS
CORRECTIVE ACTION
1
Make sure you are using the correct IP address of WLAN ADSL2+ Router. Check
the IP address of WLAN ADSL2+ Router.
2
Make sure that there is not a console session running.
3
Check that you have enabled web service access. If you have configured a secured
client IP address, your computer’s IP address must match it.
4
For WAN access, you must configure remote management to allow server access
from the Wan (or all).
5
Your computer’s and WLAN ADSL2+ Router’s IP addresses must be on the same
subnet for LAN access.
6
If you changed WLAN ADSL2+ Router’s LAN IP address, then enter the new one as
the URL.
7
Remove any filters in LAN or WAN that block web service.
The web configuration does not display properly.
STEPS
CORRECTIVE ACTION
1
Make sure you are using Internet Explorer 5.0 and later versions.
2
Delete the temporary web files and log in again.
In Internet Explorer, click
Tools
,
Internet Options
and then click the
Delete Files ...
button. When a
Delete Files
window displays, select
Delete all offline content
and
click
OK
. (Steps may vary depending on the version of your Internet browser.)
A.4 Login Username and Password
I forgot my login username and/or password.
STEPS
CORRECTIVE ACTION
1
If you have changed the password and have now forgotten it, you will need to upload
the default configuration file. This will erase all custom configurations and restore all
of the factory defaults including the password.
2
Press the
Reset
button for five seconds, and then release it. When the
LINK
LED
begins to blink, the defaults have been restored and WLAN ADSL2+ Router restarts.
3
The default username is “admin”. The default password is “1234”. The
Password
and
Username
fields are case-sensitive. Make sure that you enter the correct
password and username using the proper casing.
4
It is highly recommended to change the default username and password. Make sure
you store the username and password in a save place.
A.5 LAN Interface
I cannot access WLAN ADSL2+ Router from the LAN or ping any computer on the LAN.
STEPS
CORRECTIVE ACTION
1
Check the Ethernet LEDs on the front panel. A LAN LED should be on if the port is
connected to a computer or hub. If the LAN LEDs on the front panel are off, refer to
Section A.1.2
.
2
Make sure that the IP address and the subnet mask of WLAN ADSL2+ Router and
your computer(s) are on the same subnet.
A.6 WAN Interface
Initialization of the ADSL connection failed.
STEPS
CORRECTIVE ACTION

Rate

4 / 5 based on 1 vote.

Popular Hiro Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top