Hawking HWRN2 Router Manual PDF (Setup & Configuration Guide)

Page 96 / 136 Scroll up to view Page 91 - 95

87

After you finish with all settings, please click ‘Apply’ (13) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

3-2-3 Virtual Server

This function allows you to redirect a port on Internet IP address (on

WAN port) to a specified port of an IP address on the local network. This

allows you to setup an Internet service on the computer on the local

network, without exposing it on the Internet directly. You can also build

many sets of port redirection to provide many different Internet services

on different local computers via a single Internet IP address.

Please click ‘Apps and Gaming’ on top of web management interface,

then click ‘Virtual Server’, and the following message will be displayed

on your web browser:

Page 97 / 136

88

Here are descriptions of every setup items:

Enable Virtual

Check this box to enable virtual server, and uncheck

Server (1):

this box to disable virtual server.

Private IP (2):

Input the IP address of the computer which provides

Internet service.

Computer Name (3):

Pull down the menu and all the computers connected to the

router will be listed here. You can easily to select the

computer name without checking the IP address of the

computer.

Private Port (4):

Input the port number of the IP address which provides

Internet service.

Type (5):

Select the type of connection, TCP or UDP. If you’re not sure,

please select ‘Both’.

Public Port (6):

Please select the port number of Internet IP address which

will be redirected to the port number of local IP address

defined above.

1

2

3

4

5

8

9

10

11

12

13

14

7

6

Page 98 / 136

89

Comment (7):

Please input any text to describe this mapping, up to 16

alphanumerical characters.

Add (8):

Add the mapping to virtual server table.

Reset (9):

Remove all inputted values.

Virtual Server

All existing virtual server mappings will be displayed here.

Table (10):

Delete

Please select a virtual server mapping by clicking the

Selected (11):

‘Select’ box of the mapping, then click ‘Delete Selected’

button to remove the mapping. If there’s no existing mapping,

this button will be grayed out.

Delete All (12):

Delete all mappings existed in virtual server table.

Reset (13):

Unselect all mappings.

After you finish with all settings, please click ‘Apply’ (14) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

Page 99 / 136

90

3-2-4 Port Mapping for Special Applications

Some applications require more than one connection at a time; these

applications won’t work with simple NAT rules. In order to make these

applications work, you can use this function to let these applications work.

Go to ‘Apps and Gaming’ and click ‘Special Applications’.

Here are descriptions of every setup items:

Enable (1):

Check this box to enable special applications and uncheck

this box to disable virtual server.

IP Address (2):

Input the IP address of the computer which you want to open

the ports.

Computer Name (3):

Pull down the menu and all the computers connected to the

router will be listed here. You can easily to select the

computer name without checking the IP address of the

computer.

TCP Port to Open (4): This is the out going (Outbound) range of TCP port numbers

for this particular application.

1

2

3

4

5

8

9

10

11

12

7

6

13

14

Page 100 / 136

91

UDP Port to Open (5):

This is the out going (Outbound) range of UDP port

numbers for this particular application.

Comment (6):

The description of this setting.

Pop. Applications:

This section lists the more popular applications that (7):

require multiple connections. Select an application

from the Popular Applications selection and click ‘Add’ to

save the setting to ‘Current Trigger-Port Table.’

Add (8):

Add the setting to the ‘Current Trigger-Port Table.’

Reset (9):

Click ‘Reset’ will clear all above setting and you can set up again.

Current Trigger-Port

All the settings for the special applications will be

(10):

listed here. If you want to remove some Special Application

settings from the " Current Trigger-Port Table", select the

Special Application settings you want to remove in the table

and then click "Delete Selected". If you want remove all

Special Appliacation settings from the table, just click

"Delete All" button. Click "Reset" will clear your current

selections.

Delete Selected (11):

Please select a special application by clicking the

‘Select’ box of the mapping, then click ‘Delete Selected’

button to remove the setting. If there’s no setting here, this

button will be grayed out.

Delete All (12):

Delete all settings existed in trigger port table.

Reset (13):

Unselect all settings.

Note: Only one LAN client can use a particular special application at a

time.

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share